SigParser(3) User Contributed Perl Documentation SigParser(3)NAMEVerilog::SigParser - Signal Parsing for Verilog language files
SYNOPSIS
use Verilog::Preproc;
use Verilog::SigParser;
my $pp = Verilog::Preproc->new(keep_comments=>0,);
my $parser = new Verilog::SigParser;
$parser->parse_preproc_file ($pp);
# The below described callbacks are then invoked
DESCRIPTIONVerilog::SigParser builds upon the Verilog::Parser module to provide
callbacks for when a signal is declared, a module instantiated, or a
module defined.
See the "Which Package" section of Verilog::Language if you are unsure
which parsing package to use for a new application. For a higher level
interface to this package, see Verilog::Netlist.
METHODS
The method interface to Verilog::SigParser is described in the
Verilog::Parser module which this package inherits. You will probably
want to use the preprocessing option of Verilog::Parser with this
package.
CALLBACKS
In order to make the parser do anything interesting, you must make a
subclass where you override one or more of the following methods as
appropriate.
Note Verilog::Parser callbacks also are invoked when SigParser is
parsing.
$self->attribute ( $text )
Scanned an attribute or meta-comment. The parser inspects the
first word of each comment line ("//key rest" to end of line) or
comment block ("/*key rest */). It calls "$self-"attribute(
meta_text )" if the first word has a true value in hash
"$self-"metacomment>.
$self->class ( $token, $name, $virtual )
This method is called at a class.
$self->covergroup ( $token, $name )
This method is called at a covergroup.
$self->contassign ( $token, $lhs, $rhs )
This method is called at a continuous "assign" keyword, with the
left and right hand part of the assignment. Note that "wire"
initializations are not considered assignments; those are received
via the var callback's value parameter.
$self->defparam ( $token, $lhs, $rhs )
This method is called at a "defparam" keyword, with the left and
right hand part of the assignment.
$self->endcell ( $token )
This method is called at the end of defining a cell. It is useful
for writing clean up routines.
$self->endgroup ( $token )
This method is called at the end of defining a covergroup. It is
useful for writing clean up routines.
$self->endinterface ( $token )
This method is called at a endinterface keyword. It is useful for
writing clean up routines.
$self->endclass ( $token )
This method is called at a endclass keyword. It is useful for
writing clean up routines.
$self->endtaskfunc ( $token )
This method is called at a endfunction or endtask keyword. It is
useful for writing clean up routines.
$self->endmodport ( $token )
This method is called at a endmodport keyword. It is useful for
writing clean up routines.
$self->endmodule ( $token )
This method is called at a endmodule keyword. It is useful for
writing clean up routines.
$self->endpackage ( $token )
This method is called at a endpackage keyword. It is useful for
writing clean up routines.
$self->endprogram ( $token )
This method is called at a endprogram keyword. It is useful for
writing clean up routines.
$self->function ( $keyword, $name, $data-type )
This method is called when a function is defined. Type is the
output size or typename, plus "signed", for example "", "[3:0]",
"integer", or "signed [2:0]".
$self->import ( $package, $id )
This method is called when an import is defined.
$self->instant ( $module, $cell, $range )
This method is called when a instantiation is defined. The first
parameter is the name of the module being instantiated. The second
parameter is the name of the cell, which may be "" for primitives.
The third is the range if the cell was arrayed.
Prior to version 3.000, the name of the parameters were also
included in this callback. This has been replaced with the parampin
callback.
$self->interface ( $keyword, $name )
This method is called when an interface is defined.
$self->modport ( $keyword, $name )
This method is called when an interface modport is defined.
$self->module ( $keyword, $name, ignored, $in_celldefine )
This method is called when a module is defined.
$self->package ( $keyword, $name )
This method is called when a package is defined.
$self->parampin ( $name, $connection, $index )
This method is called when a parameter is connected to an
instantiation, IE the "#(...)" syntax. It is also used for UDP
delays (Three calls for "#(delay0,delay1,delay2)"), as the parser
does not know if the instantiation is for an UDP versus a module.
$self->pin ( $name, $connection, $index )
This method is called when a pin on a instant is defined. If a pin
name was not provided and the connection is by position, name will
be '' or undef.
If you do not need the pin nor var nor port callbacks, consider the
"$self->new (... use_vars=>0 ...)" option to accelerate parsing.
$self->port ( $name, $objof, $direction, $data_type, $array, $pinnum )
This method is called when a module port is defined. It may be
called twice on a port if the 1995 style is used; the first call is
made at the port header, the second call at the input/output
declaration.
The first argument $name, is the name of the port. $objof is what
the port is an object of ('module', 'function', etc). $direction
is the port direction ('input', 'output', 'inout', 'ref', 'const
ref', or 'interface'). $data_type is the data type ('reg',
'user_type_t', 'signed [31:0]', etc, or for interfaces the
"{interface_id}.{modport_name}"). $array is the arraying of the
port ('[1:0][2:0]', '', etc). $pinnum is set to the pin number for
ANSI style declarations, and 0 for Verilog 1995 declarations made
outside the port list.
If you do not need the pin nor var nor port callbacks, consider the
"$self->new (... use_vars=>0 ...)" option to accelerate parsing.
$self->ppdefine ( $defvar, $definition )
This method is called when a preprocessor definition is
encountered.
$self->program ( $keyword, $name )
This method is called when a program is defined.
$self->signal_decl ( $keyword, $signame, $vector, $mem, $signed, $value
)
This method is no longer used, see $self->var.
$self->task ( $keyword, $name )
This method is called when a task is defined.
$self->var ( $kwd, $name, $objof, $nettype, $data_type, $array, $value
)
This method is called when a variable or net is defined.
The first argument $kwd is how it was declared ('port', 'var',
'genvar', 'parameter', 'localparam', 'typedef') or if applicable a
net type ('supply0', 'wire', etc). $name is the name of the
variable. $objof is what the variable is an object of ('module',
'function', etc). $nettype is the net type if any was defined ('',
'supply0', 'wire', 'tri', etc). $data_type is the data type
('user_type_t', '[31:0] signed', etc). $array is the arraying of
the variable which is the text AFTER the variable name
('[1:0][2:0]', '', etc). $value is what the variable was assigned
to ('', or expression).
Note typedefs are included here, because "parameter type" is both a
variable and a type declaration.
If you do not need the pin nor var nor port callbacks, consider the
"$self->new (... use_vars=>0 ...)" option to accelerate parsing.
Below are some example declarations and the callbacks:
reg [4:0] vect = 5'b10100;
# VAR 'var' 'vect' 'module' '' 'reg [4:0]' '' '5'b10100'
wire (weak0, weak1) value = pullval;
# VAR 'net' 'value' 'module' 'wire' '' '' 'pullval'
reg [1:0] mem [12:2];
# VAR 'var' 'mem' 'module' '' 'reg [1:0]' '[12:2]' ''
int n[1:2][1:3] = '{'{0,1,2}, '{3{4}}};
# verilog/parser_sv.v:121: VAR 'var' 'n' 'module' '' 'int' '[1:2][1:3]' ''{'{0,1,2},'{3}}'
module ( output logic [SZ-1:0] o_sized );
# VAR 'port' 'o_sized' 'module' '' 'logic [SZ-1:0]' '' ''
struct packed signed { bit [7:0] m_b; };
# VAR 'member' 'm_b' 'struct' '' 'bit [7:0]' '' ''
BUGS
This is being distributed as a baseline for future contributions.
Don't expect a lot, the Parser is still naive, and there are many
awkward cases that aren't covered.
Note the SigParser is focused on extracting signal information. It
does NOT extract enough information to derive general interconnect; for
example the contents of 'assign' statements are not parsed.
DISTRIBUTION
Verilog-Perl is part of the <http://www.veripool.org/> free Verilog EDA
software tool suite. The latest version is available from CPAN and
from http://www.veripool.org/verilog-perl
<http://www.veripool.org/verilog-perl>.
Copyright 2000-2012 by Wilson Snyder. This package is free software;
you can redistribute it and/or modify it under the terms of either the
GNU Lesser General Public License Version 3 or the Perl Artistic
License Version 2.0.
AUTHORS
Wilson Snyder <wsnyder@wsnyder.org>
SEE ALSO
Verilog-Perl, Verilog::Parser, Verilog::Language, Verilog::Netlist,
Verilog::Getopt
perl v5.14.2 2012-02-27 SigParser(3)