VLAN(7)VLAN(7)NAMEVLAN - virtual local area network
DESCRIPTION
This manpage provides a brief overview of VLAN (virtual LAN) technolā
ogy.
VLANs are logical, or network segments that can span multiple physical
network segments. A primary benefit of VLANs is that they can isolate
broadcast and multicast traffic by determining which destinations
should receive that traffic, thereby making better use of switch and
end-station resources.
Logical separation using VLAN allows for the logical grouping of PCs,
servers and other network resources to behave as if they were connected
to the same, physical segment, even if they are not.
HP-UX VLAN is an implementation of IEEE 802.1p/Q standards.
VLAN interfaces can be configured in HP-UX servers using the command
(see nwmgr_vlan(1M)) or (see lanadmin_vlan(1M)). HP recommends that
you use for HP-UX Release 11i Version 3 and forward. Interfaces can
also be configured using the web-based management tool HP-UX System
Management Homepage (HP SMH).
Each VLAN interface created is assigned a VLAN PPA (VPPA) that is
unique across the system and a VLAN ID, that identifies the virtual LAN
it is part of. The VLAN ID is unique on the interface on which the
VLAN interface is created.
WARNINGS
The and commands are deprecated. These commands will be removed in a
future HP-UX release. HP recommends the use of replacement command
nwmgr(1M) to perform all network interface-related tasks.
SEE ALSOlanadmin(1M), lanadmin_vlan(1M), lanscan(1M), nwmgr(1M),
nwmgr_vlan(1M), smh(1M).
IEEE 802.1p, IEEE 802.1Q
VLAN(7)