ExtUtils::MakeMakPerl)Programmers ReferenceExtUtils::MakeMaker(3)NAMEExtUtils::MakeMaker - create an extension Makefile
SYNOPSIS
"use ExtUtils::MakeMaker;"
"WriteMakefile( ATTRIBUTE => VALUE [, ...] );"
which is really
"MM->new(\%att)->flush;"
DESCRIPTION
This utility is designed to write a Makefile for an exten
sion module from a Makefile.PL. It is based on the Make
file.SH model provided by Andy Dougherty and the
perl5-porters.
It splits the task of generating the Makefile into several
subroutines that can be individually overridden. Each
subroutine returns the text it wishes to have written to
the Makefile.
MakeMaker is object oriented. Each directory below the
current directory that contains a Makefile.PL. Is treated
as a separate object. This makes it possible to write an
unlimited number of Makefiles with a single invocation of
WriteMakefile().
How To Write A Makefile.PL
The short answer is: Don't.
Always begin with h2xs.
Always begin with h2xs!
ALWAYS BEGIN WITH H2XS!
even if you're not building around a header file, and even
if you don't have an XS component.
Run h2xs(1) before you start thinking about writing a mod
ule. For so called pm-only modules that consist of "*.pm"
files only, h2xs has the "-X" switch. This will generate
dummy files of all kinds that are useful for the module
developer.
The medium answer is:
use ExtUtils::MakeMaker;
WriteMakefile( NAME => "Foo::Bar" );
The long answer is the rest of the manpage :-)
Default Makefile Behaviour
The generated Makefile enables the user of the extension
to invoke
perl Makefile.PL # optionally "perl Makefile.PL verbose"
make
make test # optionally set TEST_VERBOSE=1
make install # See below
The Makefile to be produced may be altered by adding argu
ments of the form "KEY=VALUE". E.g.
perl Makefile.PL PREFIX=/tmp/myperl5
Other interesting targets in the generated Makefile are
make config # to check if the Makefile is up-to-date
make clean # delete local temp files (Makefile gets renamed)
make realclean # delete derived files (including ./blib)
make ci # check in all the files in the MANIFEST file
make dist # see below the Distribution Support section
make test
MakeMaker checks for the existence of a file named test.pl
in the current directory and if it exists it adds commands
to the test target of the generated Makefile that will
execute the script with the proper set of perl "-I"
options.
MakeMaker also checks for any files matching
glob("t/*.t"). It will add commands to the test target of
the generated Makefile that execute all matching files via
the the Test::Harness manpage module with the "-I"
switches set correctly.
make testdb
A useful variation of the above is the target "testdb". It
runs the test under the Perl debugger (see the perldebug
manpage). If the file test.pl exists in the current direc
tory, it is used for the test.
If you want to debug some other testfile, set "TEST_FILE"
variable thusly:
make testdb TEST_FILE=t/mytest.t
By default the debugger is called using "-d" option to
perl. If you want to specify some other option, set
"TESTDB_SW" variable:
make testdb TESTDB_SW=-Dx
make install
make alone puts all relevant files into directories that
are named by the macros INST_LIB, INST_ARCHLIB,
INST_SCRIPT, INST_HTMLLIBDIR, INST_HTMLSCRIPTDIR,
INST_MAN1DIR, and INST_MAN3DIR. All these default to
something below ./blib if you are not building below the
perl source directory. If you are building below the perl
source, INST_LIB and INST_ARCHLIB default to ../../lib,
and INST_SCRIPT is not defined.
The install target of the generated Makefile copies the
files found below each of the INST_* directories to their
INSTALL* counterparts. Which counterparts are chosen
depends on the setting of INSTALLDIRS according to the
following table:
INSTALLDIRS set to
perl site
INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH
INST_LIB INSTALLPRIVLIB INSTALLSITELIB
INST_HTMLLIBDIR INSTALLHTMLPRIVLIBDIR INSTALLHTMLSITELIBDIR
INST_HTMLSCRIPTDIR INSTALLHTMLSCRIPTDIR
INST_BIN INSTALLBIN
INST_SCRIPT INSTALLSCRIPT
INST_MAN1DIR INSTALLMAN1DIR
INST_MAN3DIR INSTALLMAN3DIR
The INSTALL... macros in turn default to their %Config
($Config{installprivlib}, $Config{installarchlib}, etc.)
counterparts.
You can check the values of these variables on your system
with
perl '-V:install.*'
And to check the sequence in which the library directories
are searched by perl, run
perl -le 'print join $/, @INC'
PREFIX and LIB attribute
PREFIX and LIB can be used to set several INSTALL*
attributes in one go. The quickest way to install a module
in a non-standard place might be
perl Makefile.PL LIB=~/lib
This will install the module's architecture-independent
files into ~/lib, the architecture-dependent files into
~/lib/$archname.
Another way to specify many INSTALL directories with a
single parameter is PREFIX.
perl Makefile.PL PREFIX=~
This will replace the string specified by "$Config{pre
fix}" in all "$Config{install*}" values.
Note, that in both cases the tilde expansion is done by
MakeMaker, not by perl by default, nor by make.
Conflicts between parameters LIB, PREFIX and the various
INSTALL* arguments are resolved so that:
setting LIB overrides any setting of INSTALLPRIVLIB,
INSTALLARCHLIB, INSTALLSITELIB, INSTALLSITEARCH (and
they are not affected by PREFIX);
without LIB, setting PREFIX replaces the initial
"$Config{prefix}" part of those INSTALL* arguments,
even if the latter are explicitly set (but are set to
still start with "$Config{prefix}").
If the user has superuser privileges, and is not working
on AFS or relatives, then the defaults for INSTALLPRIVLIB,
INSTALLARCHLIB, INSTALLSCRIPT, etc. will be appropriate,
and this incantation will be the best:
perl Makefile.PL; make; make test
make install
make install per default writes some documentation of what
has been done into the file "$(INSTALLARCHLIB)/perllo
cal.pod". This feature can be bypassed by calling make
pure_install.
AFS users
will have to specify the installation directories as these
most probably have changed since perl itself has been
installed. They will have to do this by calling
perl Makefile.PL INSTALLSITELIB=/afs/here/today \
INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages
make
Be careful to repeat this procedure every time you recom
pile an extension, unless you are sure the AFS installa
tion directories are still valid.
Static Linking of a new Perl Binary
An extension that is built with the above steps is ready
to use on systems supporting dynamic loading. On systems
that do not support dynamic loading, any newly created
extension has to be linked together with the available
resources. MakeMaker supports the linking process by cre
ating appropriate targets in the Makefile whenever an
extension is built. You can invoke the corresponding sec
tion of the makefile with
make perl
That produces a new perl binary in the current directory
with all extensions linked in that can be found in
INST_ARCHLIB , SITELIBEXP, and PERL_ARCHLIB. To do that,
MakeMaker writes a new Makefile, on UNIX, this is called
Makefile.aperl (may be system dependent). If you want to
force the creation of a new perl, it is recommended, that
you delete this Makefile.aperl, so the directories are
searched-through for linkable libraries again.
The binary can be installed into the directory where perl
normally resides on your machine with
make inst_perl
To produce a perl binary with a different name than
"perl", either say
perl Makefile.PL MAP_TARGET=myperl
make myperl
make inst_perl
or say
perl Makefile.PL
make myperl MAP_TARGET=myperl
make inst_perl MAP_TARGET=myperl
In any case you will be prompted with the correct invoca
tion of the "inst_perl" target that installs the new
binary into INSTALLBIN.
make inst_perl per default writes some documentation of
what has been done into the file "$(INSTALLARCHLIB)/perl
local.pod". This can be bypassed by calling make
pure_inst_perl.
Warning: the inst_perl: target will most probably over
write your existing perl binary. Use with care!
Sometimes you might want to build a statically linked perl
although your system supports dynamic loading. In this
case you may explicitly set the linktype with the invoca
tion of the Makefile.PL or make:
perl Makefile.PL LINKTYPE=static # recommended
or
make LINKTYPE=static # works on most systems
Determination of Perl Library and Installation Locations
MakeMaker needs to know, or to guess, where certain things
are located. Especially INST_LIB and INST_ARCHLIB (where
to put the files during the make(1) run), PERL_LIB and
PERL_ARCHLIB (where to read existing modules from), and
PERL_INC (header files and "libperl*.*").
Extensions may be built either using the contents of the
perl source directory tree or from the installed perl
library. The recommended way is to build extensions after
you have run 'make install' on perl itself. You can do
that in any directory on your hard disk that is not below
the perl source tree. The support for extensions below the
ext directory of the perl distribution is only good for
the standard extensions that come with perl.
If an extension is being built below the "ext/" directory
of the perl source then MakeMaker will set PERL_SRC auto
matically (e.g., "../.."). If PERL_SRC is defined and the
extension is recognized as a standard extension, then
other variables default to the following:
PERL_INC = PERL_SRC
PERL_LIB = PERL_SRC/lib
PERL_ARCHLIB = PERL_SRC/lib
INST_LIB = PERL_LIB
INST_ARCHLIB = PERL_ARCHLIB
If an extension is being built away from the perl source
then MakeMaker will leave PERL_SRC undefined and default
to using the installed copy of the perl library. The other
variables default to the following:
PERL_INC = $archlibexp/CORE
PERL_LIB = $privlibexp
PERL_ARCHLIB = $archlibexp
INST_LIB = ./blib/lib
INST_ARCHLIB = ./blib/arch
If perl has not yet been installed then PERL_SRC can be
defined on the command line as shown in the previous sec
tion.
Which architecture dependent directory?
If you don't want to keep the defaults for the INSTALL*
macros, MakeMaker helps you to minimize the typing needed:
the usual relationship between INSTALLPRIVLIB and INSTAL
LARCHLIB is determined by Configure at perl compilation
time. MakeMaker supports the user who sets INSTALLPRIVLIB.
If INSTALLPRIVLIB is set, but INSTALLARCHLIB not, then
MakeMaker defaults the latter to be the same subdirectory
of INSTALLPRIVLIB as Configure decided for the counter
parts in %Config , otherwise it defaults to INSTALL
PRIVLIB. The same relationship holds for INSTALLSITELIB
and INSTALLSITEARCH.
MakeMaker gives you much more freedom than needed to con
figure internal variables and get different results. It is
worth to mention, that make(1) also lets you configure
most of the variables that are used in the Makefile. But
in the majority of situations this will not be necessary,
and should only be done if the author of a package recom
mends it (or you know what you're doing).
Using Attributes and Parameters
The following attributes can be specified as arguments to
WriteMakefile() or as NAME=VALUE pairs on the command
line:
ABSTRACT
One line description of the module. Will be included in
PPD file.
ABSTRACT_FROM
Name of the file that contains the package description.
MakeMaker looks for a line in the POD matching /^($pack
age\s-\s)(.*)/. This is typically the first line in the
"=head1 NAME" section. $2 becomes the abstract.
AUTHOR
String containing name (and email address) of package
author(s). Is used in PPD (Perl Package Description)
files for PPM (Perl Package Manager).
BINARY_LOCATION
Used when creating PPD files for binary packages. It
can be set to a full or relative path or URL to the
binary archive for a particular architecture. For exam
ple:
perl Makefile.PL BINARY_LOCATION=x86/Agent.tar.gz
builds a PPD package that references a binary of the
"Agent" package, located in the "x86" directory relative
to the PPD itself.
C Ref to array of *.c file names. Initialised from a
directory scan and the values portion of the XS
attribute hash. This is not currently used by MakeMaker
but may be handy in Makefile.PLs.
CAPI
[This attribute is obsolete in Perl 5.6. PERL_OBJECT
builds are C-compatible by default.]
Switch to force usage of the Perl C API even when
compiling for PERL_OBJECT.
Note that this attribute is passed through to any recur
sive build, but if and only if the submodule's Make
file.PL itself makes no mention of the 'CAPI' attribute.
CCFLAGS
String that will be included in the compiler call com
mand line between the arguments INC and OPTIMIZE.
CONFIG
Arrayref. E.g. [qw(archname manext)] defines ARCHNAME &
MANEXT from config.sh. MakeMaker will add to CONFIG the
following values anyway: ar cc cccdlflags ccdlflags
dlext dlsrc ld lddlflags ldflags libc lib_ext obj_ext
ranlib sitelibexp sitearchexp so
CONFIGURE
CODE reference. The subroutine should return a hash ref
erence. The hash may contain further attributes, e.g.
{LIBS => ...}, that have to be determined by some evalu
ation method.
DEFINE
Something like ""-DHAVE_UNISTD_H""
DIR
Ref to array of subdirectories containing Makefile.PLs
e.g. [ 'sdbm' ] in ext/SDBM_File
DISTNAME
Your name for distributing the package (by tar file).
This defaults to NAME above.
DL_FUNCS
Hashref of symbol names for routines to be made avail
able as universal symbols. Each key/value pair consists
of the package name and an array of routine names in
that package. Used only under AIX, OS/2, VMS and Win32
at present. The routine names supplied will be expanded
in the same way as XSUB names are expanded by the XS()
macro. Defaults to
{"$(NAME)" => ["boot_$(NAME)" ] }
e.g.
{"RPC" => [qw( boot_rpcb rpcb_gettime getnetconfigent )],
"NetconfigPtr" => [ 'DESTROY'] }
Please see the the ExtUtils::Mksymlists manpage documen
tation for more information about the DL_FUNCS, DL_VARS
and FUNCLIST attributes.
DL_VARS
Array of symbol names for variables to be made available
as universal symbols. Used only under AIX, OS/2, VMS
and Win32 at present. Defaults to []. (e.g. [
qw(Foo_version Foo_numstreams Foo_tree ) ])
EXCLUDE_EXT
Array of extension names to exclude when doing a static
build. This is ignored if INCLUDE_EXT is present. Con
sult INCLUDE_EXT for more details. (e.g. [ qw( Socket
POSIX ) ] )
This attribute may be most useful when specified as a
string on the command line: perl Makefile.PL
EXCLUDE_EXT='Socket Safe'
EXE_FILES
Ref to array of executable files. The files will be
copied to the INST_SCRIPT directory. Make realclean will
delete them from there again.
FIRST_MAKEFILE
The name of the Makefile to be produced. Defaults to the
contents of MAKEFILE, but can be overridden. This is
used for the second Makefile that will be produced for
the MAP_TARGET.
FULLPERL
Perl binary able to run this extension.
FUNCLIST
This provides an alternate means to specify function
names to be exported from the extension. Its value is a
reference to an array of function names to be exported
by the extension. These names are passed through unal
tered to the linker options file.
H Ref to array of *.h file names. Similar to C.
HTMLLIBPODS
Hashref of .pm and .pod files. MakeMaker will default
this to all
.pod and any .pm files that include POD directives.
The files listed here will be converted to HTML format
and installed as was requested at Configure time.
HTMLSCRIPTPODS
Hashref of pod-containing files. MakeMaker will default
this to all EXE_FILES files that include POD directives.
The files listed here will be converted to HTML format
and installed as was requested at Configure time.
IMPORTS
This attribute is used to specify names to be imported
into the extension. It is only used on OS/2 and Win32.
INC
Include file dirs eg: ""-I/usr/5include -I/path/to/inc""
INCLUDE_EXT
Array of extension names to be included when doing a
static build. MakeMaker will normally build with all of
the installed extensions when doing a static build, and
that is usually the desired behavior. If INCLUDE_EXT is
present then MakeMaker will build only with those exten
sions which are explicitly mentioned. (e.g. [ qw(
Socket POSIX ) ])
It is not necessary to mention DynaLoader or the current
extension when filling in INCLUDE_EXT. If the
INCLUDE_EXT is mentioned but is empty then only
DynaLoader and the current extension will be included in
the build.
This attribute may be most useful when specified as a
string on the command line: perl Makefile.PL
INCLUDE_EXT='POSIX Socket Devel::Peek'
INSTALLARCHLIB
Used by 'make install', which copies files from
INST_ARCHLIB to this directory if INSTALLDIRS is set to
perl.
INSTALLBIN
Directory to install binary files (e.g. tkperl) into.
INSTALLDIRS
Determines which of the two sets of installation direc
tories to choose: installprivlib and installarchlib ver
sus installsitelib and installsitearch. The first pair
is chosen with INSTALLDIRS=perl, the second with
INSTALLDIRS=site. Default is site.
INSTALLHTMLPRIVLIBDIR
This directory gets the HTML pages at 'make install'
time. Defaults to $Config{installhtmlprivlibdir}.
INSTALLHTMLSCRIPTDIR
This directory gets the HTML pages at 'make install'
time. Defaults to $Config{installhtmlscriptdir}.
INSTALLHTMLSITELIBDIR
This directory gets the HTML pages at 'make install'
time. Defaults to $Config{installhtmlsitelibdir}.
INSTALLMAN1DIR
This directory gets the man pages at 'make install'
time. Defaults to $Config{installman1dir}.
INSTALLMAN3DIR
This directory gets the man pages at 'make install'
time. Defaults to $Config{installman3dir}.
INSTALLPRIVLIB
Used by 'make install', which copies files from INST_LIB
to this directory if INSTALLDIRS is set to perl.
INSTALLSCRIPT
Used by 'make install' which copies files from
INST_SCRIPT to this directory.
INSTALLSITEARCH
Used by 'make install', which copies files from
INST_ARCHLIB to this directory if INSTALLDIRS is set to
site (default).
INSTALLSITELIB
Used by 'make install', which copies files from INST_LIB
to this directory if INSTALLDIRS is set to site
(default).
INST_ARCHLIB
Same as INST_LIB for architecture dependent files.
INST_BIN
Directory to put real binary files during 'make'. These
will be copied to INSTALLBIN during 'make install'
INST_EXE
Old name for INST_SCRIPT. Deprecated. Please use
INST_SCRIPT if you need to use it.
INST_HTMLLIBDIR
Directory to hold the man pages in HTML format at 'make'
time
INST_HTMLSCRIPTDIR
Directory to hold the man pages in HTML format at 'make'
time
INST_LIB
Directory where we put library files of this extension
while building it.
INST_MAN1DIR
Directory to hold the man pages at 'make' time
INST_MAN3DIR
Directory to hold the man pages at 'make' time
INST_SCRIPT
Directory, where executable files should be installed
during 'make'. Defaults to "./blib/script", just to have
a dummy location during testing. make install will copy
the files in INST_SCRIPT to INSTALLSCRIPT.
LDFROM
defaults to "$(OBJECT)" and is used in the ld command to
specify what files to link/load from (also see
dynamic_lib below for how to specify ld flags)
LIB
LIB should only be set at "perl Makefile.PL" time but is
allowed as a MakeMaker argument. It has the effect of
setting both INSTALLPRIVLIB and INSTALLSITELIB to that
value regardless any explicit setting of those arguments
(or of PREFIX). INSTALLARCHLIB and INSTALLSITEARCH are
set to the corresponding architecture subdirectory.
LIBPERL_A
The filename of the perllibrary that will be used
together with this extension. Defaults to libperl.a.
LIBS
An anonymous array of alternative library specifications
to be searched for (in order) until at least one library
is found. E.g.
'LIBS' => ["-lgdbm", "-ldbm -lfoo", "-L/path -ldbm.nfs"]
Mind, that any element of the array contains a complete
set of arguments for the ld command. So do not specify
'LIBS' => ["-ltcl", "-ltk", "-lX11"]
See ODBM_File/Makefile.PL for an example, where an array
is needed. If you specify a scalar as in
'LIBS' => "-ltcl -ltk -lX11"
MakeMaker will turn it into an array with one element.
LINKTYPE
'static' or 'dynamic' (default unless usedl=undef in
config.sh). Should only be used to force static linking
(also see linkext below).
MAKEAPERL
Boolean which tells MakeMaker, that it should include
the rules to make a perl. This is handled automatically
as a switch by MakeMaker. The user normally does not
need it.
MAKEFILE
The name of the Makefile to be produced.
MAN1PODS
Hashref of pod-containing files. MakeMaker will default
this to all EXE_FILES files that include POD directives.
The files listed here will be converted to man pages and
installed as was requested at Configure time.
MAN3PODS
Hashref of .pm and .pod files. MakeMaker will default
this to all
.pod and any .pm files that include POD directives. The
files listed here will be converted to man pages and
installed as was requested at Configure time.
MAP_TARGET
If it is intended, that a new perl binary be produced,
this variable may hold a name for that binary. Defaults
to perl
MYEXTLIB
If the extension links to a library that it builds set
this to the name of the library (see SDBM_File)
NAME
Perl module name for this extension (DBD::Oracle). This
will default to the directory name but should be explic
itly defined in the Makefile.PL.
NEEDS_LINKING
MakeMaker will figure out if an extension contains link
able code anywhere down the directory tree, and will set
this variable accordingly, but you can speed it up a
very little bit if you define this boolean variable
yourself.
NOECHO
Defaults to "@". By setting it to an empty string you
can generate a Makefile that echos all commands. Mainly
used in debugging MakeMaker itself.
NORECURS
Boolean. Attribute to inhibit descending into subdirec
tories.
NO_VC
In general, any generated Makefile checks for the cur
rent version of MakeMaker and the version the Makefile
was built under. If NO_VC is set, the version check is
neglected. Do not write this into your Makefile.PL, use
it interactively instead.
OBJECT
List of object files, defaults to '$(BASE
EXT)$(OBJ_EXT)', but can be a long string containing all
object files, e.g. "tkpBind.o tkpButton.o tkpCanvas.o"
(Where BASEEXT is the last component of NAME, and
OBJ_EXT is $Config{obj_ext}.)
OPTIMIZE
Defaults to "-O". Set it to "-g" to turn debugging on.
The flag is passed to subdirectory makes.
PERL
Perl binary for tasks that can be done by miniperl
PERLMAINCC
The call to the program that is able to compile perl
main.c. Defaults to $(CC).
PERL_ARCHLIB
Same as below, but for architecture dependent files.
PERL_LIB
Directory containing the Perl library to use.
PERL_MALLOC_OK
defaults to 0. Should be set to TRUE if the extension
can work with the memory allocation routines substituted
by the Perl malloc() subsystem. This should be applica
ble to most extensions with exceptions of those
with bugs in memory allocations which are caught by
Perl's malloc();
which interact with the memory allocator in other
ways than via malloc(), realloc(), free(), calloc(),
sbrk() and brk();
which rely on special alignment which is not pro
vided by Perl's malloc().
NOTE. Negligence to set this flag in any one of loaded
extension nullifies many advantages of Perl's malloc(),
such as better usage of system resources, error detec
tion, memory usage reporting, catchable failure of mem
ory allocations, etc.
PERL_SRC
Directory containing the Perl source code (use of this
should be avoided, it may be undefined)
PERM_RW
Desired permission for read/writable files. Defaults to
"644". See also the perm_rw entry in the MM_Unix man
page.
PERM_RWX
Desired permission for executable files. Defaults to
"755". See also the perm_rwx entry in the MM_Unix man
page.
PL_FILES
Ref to hash of files to be processed as perl programs.
MakeMaker will default to any found *.PL file (except
Makefile.PL) being keys and the basename of the file
being the value. E.g.
{'foobar.PL' => 'foobar'}
The *.PL files are expected to produce output to the
target files themselves. If multiple files can be gener
ated from the same *.PL file then the value in the hash
can be a reference to an array of target file names.
E.g.
{'foobar.PL' => ['foobar1','foobar2']}
PM
Hashref of .pm files and *.pl files to be installed.
e.g.
{'name_of_file.pm' => '$(INST_LIBDIR)/install_as.pm'}
By default this will include *.pm and *.pl and the files
found in the PMLIBDIRS directories. Defining PM in the
Makefile.PL will override PMLIBDIRS.
PMLIBDIRS
Ref to array of subdirectories containing library files.
Defaults to [ 'lib', $(BASEEXT) ]. The directories will
be scanned and any files they contain will be installed
in the corresponding location in the library. A lib_
scan() method can be used to alter the behaviour.
Defining PM in the Makefile.PL will override PMLIBDIRS.
(Where BASEEXT is the last component of NAME.)
PM_FILTER
A filter program, in the traditional Unix sense (input
from stdin, output to stdout) that is passed on each .pm
file during the build (in the pm_to_blib() phase). It
is empty by default, meaning no filtering is done.
Great care is necessary when defining the command if
quoting needs to be done. For instance, you would need
to say:
{'PM_FILTER' => 'grep -v \\"^\\#\\"'}
to remove all the leading coments on the fly during the
build. The extra \\ are necessary, unfortunately,
because this variable is interpolated within the context
of a Perl program built on the command line, and double
quotes are what is used with the -e switch to build that
command line. The # is escaped for the Makefile, since
what is going to be generated will then be:
PM_FILTER = grep -v \"^\#\"
Without the \\ before the #, we'd have the start of a
Makefile comment, and the macro would be incorrectly
defined.
POLLUTE
Release 5.005 grandfathered old global symbol names by
providing preprocessor macros for extension source com
patibility. As of release 5.6, these preprocessor defi
nitions are not available by default. The POLLUTE flag
specifies that the old names should still be defined:
perl Makefile.PL POLLUTE=1
Please inform the module author if this is necessary to
successfully install a module under 5.6 or later.
PPM_INSTALL_EXEC
Name of the executable used to run "PPM_INSTALL_SCRIPT"
below. (e.g. perl)
PPM_INSTALL_SCRIPT
Name of the script that gets executed by the Perl Pack
age Manager after the installation of a package.
PREFIX
Can be used to set the three INSTALL* attributes in one
go (except for probably INSTALLMAN1DIR, if it is not
below PREFIX according to %Config). They will have PRE
FIX as a common directory node and will branch from that
node into lib/, lib/ARCHNAME or whatever Configure
decided at the build time of your perl (unless you over
ride one of them, of course).
PREREQ_PM
Hashref: Names of modules that need to be available to
run this extension (e.g. Fcntl for SDBM_File) are the
keys of the hash and the desired version is the value.
If the required version number is 0, we only check if
any version is installed already.
SKIP
Arryref. E.g. [qw(name1 name2)] skip (do not write) sec
tions of the Makefile. Caution! Do not use the SKIP
attribute for the negligible speedup. It may seriously
damage the resulting Makefile. Only use it if you really
need it.
TYPEMAPS
Ref to array of typemap file names. Use this when the
typemaps are in some directory other than the current
directory or when they are not named typemap. The last
typemap in the list takes precedence. A typemap in the
current directory has highest precedence, even if it
isn't listed in TYPEMAPS. The default system typemap
has lowest precedence.
VERSION
Your version number for distributing the package. This
defaults to 0.1.
VERSION_FROM
Instead of specifying the VERSION in the Makefile.PL you
can let MakeMaker parse a file to determine the version
number. The parsing routine requires that the file named
by VERSION_FROM contains one single line to compute the
version number. The first line in the file that contains
the regular expression
/([\$*])(([\w\:\']*)\bVERSION)\b.*\=/
will be evaluated with eval() and the value of the named
variable after the eval() will be assigned to the VER
SION attribute of the MakeMaker object. The following
lines will be parsed o.k.:
$VERSION = '1.00';
*VERSION = \'1.01';
( $VERSION ) = '$Revision: 1.222 $ ' =~ /\$Revision:\s+([^\s]+)/;
$FOO::VERSION = '1.10';
*FOO::VERSION = \'1.11';
our $VERSION = 1.2.3; # new for perl5.6.0
but these will fail:
my $VERSION = '1.01';
local $VERSION = '1.02';
local $FOO::VERSION = '1.30';
(Putting "my" or "local" on the preceding line will work
o.k.)
The file named in VERSION_FROM is not added as a depen
dency to Makefile. This is not really correct, but it
would be a major pain during development to have to
rewrite the Makefile for any smallish change in that
file. If you want to make sure that the Makefile con
tains the correct VERSION macro after any change of the
file, you would have to do something like
depend => { Makefile => '$(VERSION_FROM)' }
See attribute "depend" below.
XS
Hashref of .xs files. MakeMaker will default this. e.g.
{'name_of_file.xs' => 'name_of_file.c'}
The .c files will automatically be included in the list
of files deleted by a make clean.
XSOPT
String of options to pass to xsubpp. This might include
"-C++" or "-extern". Do not include typemaps here; the
TYPEMAP parameter exists for that purpose.
XSPROTOARG
May be set to an empty string, which is identical to
"-prototypes", or "-noprototypes". See the xsubpp docu
mentation for details. MakeMaker defaults to the empty
string.
XS_VERSION
Your version number for the .xs file of this package.
This defaults to the value of the VERSION attribute.
Additional lowercase attributes
can be used to pass parameters to the methods which imple
ment that part of the Makefile.
clean
{FILES => "*.xyz foo"}
depend
{ANY_TARGET => ANY_DEPENDECY, ...}
(ANY_TARGET must not be given a double-colon rule by
MakeMaker.)
dist
{TARFLAGS => 'cvfF', COMPRESS => 'gzip', SUFFIX => '.gz',
SHAR => 'shar -m', DIST_CP => 'ln', ZIP => '/bin/zip',
ZIPFLAGS => '-rl', DIST_DEFAULT => 'private tardist' }
If you specify COMPRESS, then SUFFIX should also be
altered, as it is needed to tell make the target file of
the compression. Setting DIST_CP to ln can be useful, if
you need to preserve the timestamps on your files.
DIST_CP can take the values 'cp', which copies the file,
'ln', which links the file, and 'best' which copies sym
bolic links and links the rest. Default is 'best'.
dynamic_lib
{ARMAYBE => 'ar', OTHERLDFLAGS => '...', INST_DYNAMIC_DEP => '...'}
linkext
{LINKTYPE => 'static', 'dynamic' or ''}
NB: Extensions that have nothing but *.pm files had to
say
{LINKTYPE => ''}
with Pre-5.0 MakeMakers. Since version 5.00 of MakeMaker
such a line can be deleted safely. MakeMaker recognizes
when there's nothing to be linked.
macro
{ANY_MACRO => ANY_VALUE, ...}
realclean
{FILES => '$(INST_ARCHAUTODIR)/*.xyz'}
test
{TESTS => 't/*.t'}
tool_autosplit
{MAXLEN => 8}
Overriding MakeMaker Methods
If you cannot achieve the desired Makefile behaviour by
specifying attributes you may define private subroutines
in the Makefile.PL. Each subroutines returns the text it
wishes to have written to the Makefile. To override a sec
tion of the Makefile you can either say:
sub MY::c_o { "new literal text" }
or you can edit the default by saying something like:
sub MY::c_o {
package MY; # so that "SUPER" works right
my $inherited = shift->SUPER::c_o(@_);
$inherited =~ s/old text/new text/;
$inherited;
}
If you are running experiments with embedding perl as a
library into other applications, you might find MakeMaker
is not sufficient. You'd better have a look at ExtU
tils::Embed which is a collection of utilities for embed
ding.
If you still need a different solution, try to develop
another subroutine that fits your needs and submit the
diffs to perl5-porters@perl.org or comp.lang.perl.moder_
ated as appropriate.
For a complete description of all MakeMaker methods see
the ExtUtils::MM_Unix manpage.
Here is a simple example of how to add a new target to the
generated Makefile:
sub MY::postamble {
'
$(MYEXTLIB): sdbm/Makefile
cd sdbm && $(MAKE) all
';
}
Hintsfile support
MakeMaker.pm uses the architecture specific information
from Config.pm. In addition it evaluates architecture spe
cific hints files in a "hints/" directory. The hints files
are expected to be named like their counterparts in
"PERL_SRC/hints", but with an ".pl" file name extension
(eg. "next_3_2.pl"). They are simply "eval"ed by MakeMaker
within the WriteMakefile() subroutine, and can be used to
execute commands as well as to include special variables.
The rules which hintsfile is chosen are the same as in
Configure.
The hintsfile is eval()ed immediately after the arguments
given to WriteMakefile are stuffed into a hash reference
$self but before this reference becomes blessed. So if you
want to do the equivalent to override or create an
attribute you would say something like
$self->{LIBS} = ['-ldbm -lucb -lc'];
Distribution Support
For authors of extensions MakeMaker provides several Make
file targets. Most of the support comes from the ExtU
tils::Manifest module, where additional documentation can
be found.
make distcheck
reports which files are below the build directory but
not in the MANIFEST file and vice versa. (See ExtU_
tils::Manifest::fullcheck() for details)
make skipcheck
reports which files are skipped due to the entries in
the "MANIFEST.SKIP" file (See ExtUtils::Mani_
fest::skipcheck() for details)
make distclean
does a realclean first and then the distcheck. Note
that this is not needed to build a new distribution as
long as you are sure that the MANIFEST file is ok.
make manifest
rewrites the MANIFEST file, adding all remaining files
found (See ExtUtils::Manifest::mkmanifest() for
details)
make distdir
Copies all the files that are in the MANIFEST file to
a newly created directory with the name
"$(DISTNAME)-$(VERSION)". If that directory exists, it
will be removed first.
make disttest
Makes a distdir first, and runs a "perl Makefile.PL",
a make, and a make test in that directory.
make tardist
First does a distdir. Then a command $(PREOP) which
defaults to a null command, followed by $(TOUNIX),
which defaults to a null command under UNIX, and will
convert files in distribution directory to UNIX format
otherwise. Next it runs "tar" on that directory into a
tarfile and deletes the directory. Finishes with a
command $(POSTOP) which defaults to a null command.
make dist
Defaults to $(DIST_DEFAULT) which in turn defaults to
tardist.
make uutardist
Runs a tardist first and uuencodes the tarfile.
make shdist
First does a distdir. Then a command $(PREOP) which
defaults to a null command. Next it runs "shar" on
that directory into a sharfile and deletes the inter
mediate directory again. Finishes with a command
$(POSTOP) which defaults to a null command. Note: For
shdist to work properly a "shar" program that can han
dle directories is mandatory.
make zipdist
First does a distdir. Then a command $(PREOP) which
defaults to a null command. Runs "$(ZIP) $(ZIPFLAGS)"
on that directory into a zipfile. Then deletes that
directory. Finishes with a command $(POSTOP) which
defaults to a null command.
make ci
Does a $(CI) and a $(RCS_LABEL) on all files in the
MANIFEST file.
Customization of the dist targets can be done by specify
ing a hash reference to the dist attribute of the
WriteMakefile call. The following parameters are recog
nized:
CI ('ci -u')
COMPRESS ('gzip --best')
POSTOP ('@ :')
PREOP ('@ :')
TO_UNIX (depends on the system)
RCS_LABEL ('rcs -q -Nv$(VERSION_SYM):')
SHAR ('shar')
SUFFIX ('.gz')
TAR ('tar')
TARFLAGS ('cvf')
ZIP ('zip')
ZIPFLAGS ('-r')
An example:
WriteMakefile( 'dist' => { COMPRESS=>"bzip2", SUFFIX=>".bz2" })
Disabling an extension
If some events detected in Makefile.PL imply that there is
no way to create the Module, but this is a normal state of
things, then you can create a Makefile which does nothing,
but succeeds on all the "usual" build targets. To do so,
use
ExtUtils::MakeMaker::WriteEmptyMakefile();
instead of WriteMakefile().
This may be useful if other modules expect this module to
be built OK, as opposed to work OK (say, this system-
dependent module builds in a subdirectory of some other
distribution, or is listed as a dependency in a CPAN::Bun
dle, but the functionality is supported by different means
on the current architecture).
ENVIRONMENT
PERL_MM_OPT
Command line options used by "MakeMaker->new()",
and thus by "WriteMakefile()". The string is
split on whitespace, and the result is processed
before any actual command line arguments are pro
cessed.
SEE ALSO
ExtUtils::MM_Unix, ExtUtils::Manifest, ExtUtils::testlib,
ExtUtils::Install, ExtUtils::Embed
AUTHORS
Andy Dougherty <doughera@lafcol.lafayette.edu>, Andreas
Koenig <A.Koenig@franz.ww.TU-Berlin.DE>, Tim Bunce
<Tim.Bunce@ig.co.uk>. VMS support by Charles Bailey <bai_
ley@newman.upenn.edu>. OS/2 support by Ilya Zakharevich
<ilya@math.ohio-state.edu>. Contact the makemaker mailing
list "mailto:makemaker@franz.ww.tu-berlin.de", if you have
any questions.
2001-03-03 perl v5.6.1 ExtUtils::MakeMaker(3)