l1cmd(1M)l1cmd(1M)Namel1cmd - Send a command to the SGI L1 System Controller
SYNOPSIS
/usr/sbin/l1cmd [--scdev device_name] command
DESCRIPTION
The l1cmd utility allows an L1 System Controller command to be executed
directly from the host OS command line. command is sent to the L1 System
Controller, and the text result of the command is displayed.
Valid command line options are:
--scdev device_name
Specifies the device that should be used to communicate with the L1
System Controller. Valid devices are /hw/module/*c*/L1/controller
(IRIX) or /dev/snsc/*c* (Linux). When this option is not specified,
l1cmd selects the L1 System Controller of the brick with the lowest
numbered rack and slot in the system.
command
This is the command to the send to the L1 System Controller. After
all of the command line options to l1cmd are processed, the
remainder of the line is used as the command to issue to the L1
System Controller.
EXAMPLES
$ /usr/sbin/l1cmd serial all
Report the System Serial number and board serial numbers stored in the L1
System Controller (of the lowest numbered rack/slot in the system).
$ /usr/sbin/l1cmd log
Dump the message log in the L1 System Controller (of the lowest numbered
rack/slot in the system).
$ /usr/sbin/l1cmd --scdev /hw/module/002c13/L1/controller log
Page 1
l1cmd(1M)l1cmd(1M)
Dump the message log in the L1 System Controller of the C-brick at rack
2, slot 13.
SEE ALSOl2cmd(1).
Page 2