RDBGSRV(8)RDBGSRV(8)NAMErdbgsrv - remote debug server
SYNOPSIS
bind -b '#t' /dev
auxi/rdbgsrv [ -dn ] [ -sbaud ] [ -fdev ] mountpoint
DESCRIPTION
Rdbgsrv interposes itself between dev (default: /dev/eia0) and mount‐
point to convey 9P messages via the serial port to and from a 9P server
program running on a board running native Inferno. The -f option spec‐
ifies the serial device; the default is /dev/eia0. The -s option sets
the line speed; the default is 38400 baud. The -d option selects
debugging options by a bit mask: 1, print trace of 9P message types; 2,
print actual 9P message contents.
The monitor program on the board must be started first. Rdbgsrv writes
the two byte message go, and keeps reading the device until it sees the
reply ok. It then attempts to mount the exported name space, and
copies 9P messages to and from the device.
Once rdbgsrv is running, any device files provided by the program will
be visible at mountpoint.
SOURCE
/appl/auxi/rdbgsrv.b
SEE ALSOstyxchat(8)BUGS
No error recovery is applied, let alone error correction.
RDBGSRV(8)