NUT-RECORDER(8) NUT Manual NUT-RECORDER(8) NAME nut-recorder - utility to record device status and values changes SYNOPSIS nut-recorder device-name [output-file] [interval] DESCRIPTION nut-recorder is an utility to record device running sequence (Ie power failures or any other change) through a NUT data server, and dump it in a .seq format. The .seq file can then be used by the dummy-ups(8) driver to replay the sequence. OPTIONS device-name Record the changes of that device. The format for this option is devname[@hostname[:port]]. The default hostname is "localhost". output-file Optional. Data will be saved to this file. The default is dummy-device.seq. interval Optional. The status of the device will be checked every interval. The default is 5 seconds. EXAMPLES To record data from ups1@host1 every 10 seconds: $ nut-recorder ups1@host1' ups1-output.seq 10 . . . battery.charge: 100.0 battery.voltage: 13.9 battery.voltage.nominal: 13.6 ups.status: OL . . . battery.charge: 90.0 ups.status: OB . . . You can then define a dummy device in ups.conf(5): [ups-test] driver = dummy-ups port = ups1-output.seq AUTHOR Arnaud Quette SEE ALSO dummy-ups(8) INTERNET RESOURCES The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 08/07/2012 NUT-RECORDER(8)[top]
Vote for polarhome |