zfftdm(3P) Sun Performance Library zfftdm(3P)NAMEzfftdm - initialize the trigonometric weight and factor tables or com‐
pute the one-dimensional inverse Fast Fourier Transform of a set of
double complex data sequences stored in a two-dimensional array.
SYNOPSIS
SUBROUTINE ZFFTDM(IOPT, N1, N2, SCALE, X, LDX, Y, LDY, TRIGS, IFAC, WORK, LWORK, IERR)
INTEGER IOPT, N1, N2, LDX, LDY, IFAC(*), LWORK, IERR
DOUBLE COMPLEX X(LDX, *)
DOUBLE PRECISION SCALE, Y(LDY, *), TRIGS(*), WORK(*)
SUBROUTINE ZFFTDM_64(IOPT, N1, N2, SCALE, X, LDX, Y, LDY, TRIGS, IFAC, WORK, LWORK, IERR)
INTEGER*8 IOPT, N1, N2, LDX, LDY, IFAC(*), LWORK, IERR
DOUBLE COMPLEX X(LDX, *)
DOUBLE PRECISION SCALE, Y(LDY,*), TRIGS(*), WORK(*)
F95 INTERFACE
SUBROUTINE FFTM(IOPT, N1, [N2], [SCALE], X, [LDX], Y, [LDY], TRIGS,
IFAC, WORK, [LWORK], IERR)
INTEGER, INTENT(IN) :: IOPT, N1
INTEGER, INTENT(IN), OPTIONAL :: N2, LDX, LDY, LWORK
REAL(8), INTENT(IN), OPTIONAL :: SCALE
COMPLEX(8), INTENT(IN), DIMENSION(:,:) :: X
REAL(8), INTENT(OUT), DIMENSION(:,:) :: Y
REAL(8), INTENT(INOUT), DIMENSION(:) :: TRIGS
INTEGER, INTENT(INOUT), DIMENSION(:) :: IFAC
REAL(8), INTENT(OUT), DIMENSION(:) :: WORK
INTEGER, INTENT(OUT) :: IERR
SUBROUTINE FFTM_64(IOPT, N1, [N2], [SCALE], X, [LDX], Y, [LDY], TRIGS, IFAC, WORK, [LWORK], IERR)
INTEGER(8), INTENT(IN) :: IOPT, N1
INTEGER(8), INTENT(IN), OPTIONAL :: N2, LDX, LDY, LWORK
REAL(8), INTENT(IN), OPTIONAL :: SCALE
COMPLEX(8), INTENT(IN), DIMENSION(:,:) :: X
REAL(8), INTENT(OUT), DIMENSION(:,:) :: Y
REAL(8), INTENT(INOUT), DIMENSION(:) :: TRIGS
INTEGER(8), INTENT(INOUT), DIMENSION(:) :: IFAC
REAL(8), INTENT(OUT), DIMENSION(:) :: WORK
INTEGER(8), INTENT(OUT) :: IERR
C INTERFACE
#include <sunperf.h>
void zfftdm_ (int *iopt, int *m, int *n, double *scale, doublecomplex
*x, int *ldx, double *y, int *ldy, double *trigs, int *ifac,
double *work, int *lwork, int *ierr);
void zfftdm_64_ (long *iopt, long *m, long *n, double *scale, double‐
complex *x, long *ldx, double *y, long *ldy, double *trigs,
long *ifac, double *work, long *lwork, long *ierr);
PURPOSEzfftdm initializes the trigonometric weight and factor tables or com‐
putes the one-dimensional inverse Fast Fourier Transform of a set of
double complex data sequences stored in a two-dimensional array:
N1-1
Y(k,l) = scale * SUM W*X(j,l)
j=0
where
k ranges from 0 to N1-1 and l ranges from 0 to N2-1
i = sqrt(-1)
isign = 1 for inverse transform
W = exp(isign*i*j*k*2*pi/N1)
In complex-to-real transform of length N1, the (N1/2+1) complex input
data points stored are the positive-frequency half of the spectrum of
the Discrete Fourier Transform. The other half can be obtained through
complex conjugation and therefore is not stored. Furthermore, due to
symmetries the imaginary of the component of X(0,0:N2-1) and
X(N1/2,0:N2-1) (if N1 is even in the latter) is assumed to be zero and
is not referenced.
ARGUMENTS
IOPT (input)
Integer specifying the operation to be performed:
IOPT = 0 computes the trigonometric weight table and factor
table
IOPT = 1 computes inverse FFT
N1 (input)
Integer specifying length of the input sequences. N1 is most
efficient when it is a product of small primes. N1 >= 0.
Unchanged on exit.
N2 (input)
Integer specifying number of input sequences. N2 >= 0.
Unchanged on exit.
SCALE (input)
Double precision scalar by which transform results are
scaled. Unchanged on exit. SCALE is defaulted to 1.0D0 for
F95 INTERFACE.
X (input) X is a double complex array of dimensions (LDX, N2) that con‐
tains the sequences to be transformed stored in its columns
in X(0:N1/2, 0:N2-1).
LDX (input)
Leading dimension of X. LDX >= (N1/2+1) Unchanged on exit.
Y (output)
Y is a double precision array of dimensions (LDY, N2) that
contains the transform results of the input sequences in
Y(0:N1-1,0:N2-1). X and Y can be the same array starting at
the same memory location, in which case the input sequences
are overwritten by their transform results. Otherwise, it is
assumed that there is no overlap between X and Y in memory.
LDY (input)
Leading dimension of Y. If X and Y are the same array, LDY =
2*LDX Else LDY >= N1 Unchanged on exit.
TRIGS (input/output)
double precision array of length 2*N1 that contains the
trigonometric weights. The weights are computed when the
routine is called with IOPT = 0 and they are used in subse‐
quent calls when IOPT = 1. Unchanged on exit.
IFAC (input/output)
Integer array of dimension at least 128 that contains the
factors of N1. The factors are computed when the routine is
called with IOPT = 0 and they are used in subsequent calls
when IOPT = 1. Unchanged on exit.
WORK (workspace)
double precision array of dimension at least N1. The user
can also choose to have the routine allocate its own
workspace (see LWORK).
LWORK (input)
Integer specifying workspace size. If LWORK = 0, the routine
will allocate its own workspace.
IERR (output)
On exit, integer IERR has one of the following values:
0 = normal return
-1 = IOPT is not 0 or 1
-2 = N1 < 0
-3 = N2 < 0
-4 = (LDX < N1/2+1)
-5 = (LDY < N1) or (LDY not equal 2*LDX when X and Y are same
array)
-6 = (LWORK not equal 0) and (LWORK < N1)
-7 = memory allocation failed
SEE ALSO
fft
6 Mar 2009 zfftdm(3P)