smp_rep_phy_sata man page on Pidora
[printable version]
SMP_REP_PHY_SATA(8) SMP_UTILS SMP_REP_PHY_SATA(8)
NAME
smp_rep_phy_sata - invoke REPORT PHY SATA SMP function
SYNOPSIS
smp_rep_phy_sata [--affiliation=AC] [--help] [--hex] [--inter‐
face=PARAMS] [--phy=ID] [--raw] [--sa=SAS_ADDR] [--verbose] [--version]
[--zero] SMP_DEVICE[,N]
DESCRIPTION
Sends a SAS Management Protocol (SMP) REPORT PHY SATA request function
to a SMP target. The SMP target is identified by the SMP_DEVICE and the
SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from
the SMP_DEVICE. The mpt interface uses SMP_DEVICE to identify a HBA (an
SMP initiator) and needs the additional ,N to differentiate between
HBAs if there are multiple present.
-a, --affiliation=AC
where AC is the affiliation context relative identifier that is
placed in request (new in sas2r08). Defaults to 0.
-h, --help
output the usage message then exit.
-H, --hex
output the response (less the CRC field) in hexadecimal.
-I, --interface=PARAMS
interface specific parameters. In this case "interface" refers
to the path through the operating system to the SMP initiator.
See the smp_utils man page for more information.
-p, --phy=ID
phy identifier. ID is a value between 0 and 254. Default is 0.
-r, --raw
send the response (less the CRC field) to stdout in binary. All
error messages are sent to stderr.
-s, --sa=SAS_ADDR
specifies the SAS address of the SMP target device. Typically
this is an expander. This option may not be needed if the
SMP_DEVICE has the target's SAS address within it. The SAS_ADDR
is in decimal but most SAS addresses are shown in hexadecimal.
To give a number in hexadecimal either prefix it with '0x' or
put a trailing 'h' on it.
-v, --verbose
increase the verbosity of the output. Can be used multiple times
-V, --version
print the version string and then exit.
-z, --zero
zero the Allocated Response Length field in the request. This
option also zeros the Request Length field in the request. This
is required for strict SAS-1.1 compliance. However this option
should not be given in SAS-2 and later; if it is given an
abridged response may result.
EXAMPLES
See "Examples" section in http://sg.danny.cz/sg/smp_utils.html
CONFORMING TO
The SMP REPORT PHY SATA function was introduced in SAS-1 . The
"Expander change count", "STP I_T nexus loss occurred" and several
other fields were added in SAS-2 .
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright © 2006-2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO war‐
ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR‐
POSE.
SEE ALSO
smp_utils, smp_phy_control(smp_utils)
smp_utils-0.96 May 2011 SMP_REP_PHY_SATA(8)
[top]
List of man pages available for Pidora
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
Vote for polarhome
|