MODBUS_READ_BITS(3) Libmodbus Manual MODBUS_READ_BITS(3)NAME
modbus_read_bits - read many bits
SYNOPSIS
int modbus_read_bits(modbus_t *ctx, int addr, int nb, uint8_t *dest);
DESCRIPTION
The modbus_read_bits() function shall read the status of the nb bits
(coils) to the address addr of the remote device. The result of reading
is stored in dest array as unsigned bytes (8 bits) set to TRUE or
FALSE.
You must take care to allocate enough memory to store the results in
dest (at least nb * sizeof(uint8_t)).
The function uses the Modbus function code 0x01 (read coil status).
RETURN VALUE
The modbus_read_bits() function shall return the number of read bits if
successful. Otherwise it shall return -1 and set errno.
ERRORS
EMBMDATA
Too many bits requested
SEE ALSOmodbus_write_bit(3)modbus_write_bits(3)AUTHORS
The libmodbus documentation was written by Stéphane Raimbault
<stephane.raimbault@gmail.com[1]>
NOTES
1. stephane.raimbault@gmail.com
mailto:stephane.raimbault@gmail.com
libmodbus 3.1.0 10/06/2013 MODBUS_READ_BITS(3)