Burp(8)Burp(8)NAME
Burp - BackUp and Restore Program
SYNOPSISburp [OPTIONS]
DESCRIPTION
BackUp and Restore Program.
SERVER OPTIONS-c [path]
Short for 'config file'. The argument is a path to the config
file. The default is /etc/burp/burp.conf.
-n No forking mode. The program will accept a single query, deal
with it, and then exit. This is useful for debugging. Implies
'-F'.
-F Foreground mode. The server will fork into the background and
run as a daemon if you do not give this option.
-g Generate initial CA keys and certificates, and then exit.
-t Dry-run mode to test config file syntax.
-i Print an index table of symbols that humans may see burp pro‐
duce, and exit.
-a s Run this to connect to a running server to get a live monitor of
the status of all your backup clients. If your server config
file is not in the default location, you will also need to spec‐
ify the path with the '-c' option. The live monitor requires
ncurses support at compile time.
-a S Similar to '-a s', but it prints the main status monitor summary
screen to stdout. The intention is that a script can run this
and email an administrator the output on a cron job. This
doesn't require ncurses support. There are additional options
that can be given with '-a S', listed below. These enable logs
and contents of backups to be listed whilst logged in on the
server machine.
ADDITIONAL SERVER OPTIONS TO USE WITH '-a S'
-C [client]
Limit the output to a single client.
-b [number]
Show listable files in a particular backup (requires -C).
-z [file]
Dump a particular log file in a backup (requires -C and -b).
-d [path]
Show a particular path in a backup (requires -C and -b).
CLIENT OPTIONS-a [b|t|r|l|L|v|delete|e|T]
Short for 'action'. The arguments mean backup, timed backup,
restore, list, long list, verify, delete, estimate, or timer
check respectively.
-b [number|a]
Short for 'backup number'. The argument is a number, or 'a' to
select all backups.
-c [path]
Short for 'config file'. The argument is a path to the config
file. The default is /etc/burp/burp.conf, or %PROGRAM‐
FILES%\Burp\burp.conf on Windows.
-C [client]
Allows you to specify an alternative client to list or restore
from. Requires that the server configuration of the alternative
client permits your client to do this. See the 'restore_client'
option.
-d [path]
Short for 'directory'. When restoring, the argument is a path to
an alternative directory to restore to. When listing, the argu‐
ment is the directory to list.
-f [path]
Short for 'force overwrite'. Without this option set, a restore
will not overwrite existing files.
-i Print an index table of symbols that humans may see burp pro‐
duce, and exit.
-r [regex]
Short for 'regular expression'. The argument is a regular
expression with which to match backup files. Use it for lists
and restores.
-s [number]
For use with restores - strip a number of leading path compo‐
nents.
-j Format list output as JSON.
-t Dry-run mode to test config file syntax.
-x For Windows clients only - do not use the Windows VSS API on
restore. Give this option when you are restoring a backup that
contains no VSS information.
EXAMPLESburp-a b
Runs a backup.
burp-a l
Lists the available backups and dates.
burp-a l -b 1
Lists all the files in backup number 1.
burp-a l -b a
Lists all the files in all the backups.
burp-a l -b 1 -r myregex
Lists all the files in backup number 1 that match the regular
expression 'myregex'.
burp-a L -b 1 -r myregex
Long lists all the files in backup number 1 that match the regu‐
lar expression 'myregex'. This is like doing an 'ls -l'.
burp-a r -b 1 -r myregex
Restores all the files in backup number 1 that match the regular
expression 'myregex' back to their original location.
burp-a r -b 1 -r myregex -d /tmp/restoredir
Restores all the files in backup number 1 that match the regular
expression 'myregex' into the directory /tmp/restoredir.
burp-a r -b 1 -r myregex -d /tmp/restoredir -s 2
Restores all the files in backup number 1 that match the regular
expression 'myregex' into the directory /tmp/restoredir and
strip 2 leading path components.
burp-a r
Restores all the files in the most recent backup to their origi‐
nal location.
burp-a v
Verifies the most recent backup.
burp-a v -b 1 -r myregex
Verifies everything in backup number 1 that matches the regular
expression 'myregex'.
burp-a delete -b 1
Deletes backup number 1. Note that burp will not delete backup
directories that other backup directories depend upon.
burp-a t
Timed backup. The same as 'burp -a b', except that a script is
run on the server before deciding to go ahead. The intention is
that this command will be run on a repeating cron job with a
short interval, and that the server will decide when it is time
for a new backup.
burp-a T
Check whether it is time to do backup, but don't actually do a
backup. The client will return 0 to mean that it is time, or 3
to mean that it is not time. Any other return code indicates an
error.
burp-a L -b 1 -d ''
Long list the top level directory of backup 1.
burp-a L -b 1 -d '/home/graham'
Long list the /home/graham directory of backup 1. These '-d'
versions of the list function provide the ability to 'browse'
backups.
burp-C altclient -a L
Long list the top level directory of backup 1 on client 'alt‐
client'.
burp-C altclient -a r -b 1 -r myregex -d /tmp/restoredir
Restores all the files in backup number 1 from client 'alt‐
client' that match the regular expression 'myregex' into the
directory /tmp/restoredir.
SERVER CONFIGURATION FILE OPTIONS
. [path]
Read an additional configuration file.
mode=server
Required to run in server mode.
port=[port number]
Defines the main TCP port that the server listens on.
status_port=[port number]
Defines the TCP port that the server listens on for status
requests.
daemon=[0|1]
Whether to daemonise. The default is 1.
fork=[0|1]
Whether to fork children. The default is 1.
directory=[path]
Path to the directory in which to store backups.
directory_tree=[0|1]
When turned on (which is the default) and the client is on ver‐
sion 1.3.6 or greater, the structure of the storage directory
will mimic that of the original filesystem on the client.
timestamp_format=[strftime format]
This allows you to tweak the format of the timestamps of indi‐
vidual backups. See 'man strftime' to see available substitu‐
tions. If this option is unset, burp uses "%Y-%m-%d %H:%M:%S".
password_check=[0|1]
Allows you to turn client password checking on or off. The
default is on. SSL certificates will still be checked if you
turn passwords off. This option can be overridden by the client
configuration files in clientconfdir on the server.
manual_delete=[path]
If a path is given, the server will move directories to be
deleted into the directory specified by the path, but will not
actually delete them. The path must be on the same file system
as the backup storage. The idea is that a busy server may be
configured to run the deletions outside of the backup timebands,
when the server is less busy, via a cron job. The default is
unset, which means that the server will automatically delete the
directories at the end of a backup. This option can be overrid‐
den by the client configuration files in clientconfdir on the
server.
clientconfdir=[path]
Path to the directory that contains client configuration files.
lockfile=[path]
Path to the lockfile that ensures that two server processes can‐
not run simultaneously.
pidfile=[path]
Synonym for lockfile.
syslog=[0|1]
Log to syslog. Defaults to off.
stdout=[0|1]
Log to stdout. Defaults to on.
keep=[number]
Number of backups to keep. This can be overridden by the client
configuration files in clientconfdir on the server. Specify mul‐
tiple 'keep' entries on separate lines in order to keep multiple
periods of backups. For example, assuming that you are doing a
backup a day, keep=7 keep=4 keep=6 (on separate lines) will keep
7 daily backups, 4 weekly backups (7x4=28), and 6 multiples of 4
weeks (7x4x6=168) - roughly 6 monthly backups. Effectively, you
will be guaranteed to be able to restore up to 168 days ago,
with the number of available backups exponentially decreasing as
you go back in time to that point. In this example, every 7th
backup will be hardlinked to allow burp to safely delete inter‐
mediate backups when necessary. You can have as many 'keep'
lines as you like, as long as they don't exceed 52560000 when
multiplied together. That is, a backup every minute for 100
years.
hardlinked_archive=[0|1]
On the server, defines whether to keep hardlinked files in the
backups, or whether to generate reverse deltas and delete the
original files. Can be set to either 0 (off) or 1 (on). Disad‐
vantage: More disk space will be used Advantage: Restores will
be faster, and since no reverse deltas need to be generated, the
time and effort the server needs at the end of a backup is
reduced.
max_hardlinks=[number]
On the server, the number of times that a single file can be
hardlinked. The bedup program also obeys this setting. The
default is 10000.
librsync=[0|1]
When set to 0, delta differencing will not take place. That is,
when a file changes, the server will request the whole new file.
The default is 1. This option can be overridden by the client
configuration files in clientconfdir on the server.
compression=gzip[0-9]
Choose the level of gzip compression for files stored in back‐
ups. Setting 0 or gzip0 turns compression off. The default is
gzip9. This option can be overridden by the client configuration
files in clientconfdir on the server.
hard_quota=[b/Kb/Mb/Gb]
Do not back up the client if the estimated size of all files is
greater than the specified size. Example: 'hard_quota = 100Gb'.
Set to 0 (the default) to have no limit.
soft_quota=[b/Kb/Mb/Gb]
A warning will be issued when the estimated size of all files is
greater than the specified size and smaller than hard_quota.
Example: 'soft_quota = 95Gb'. Set to 0 (the default) to have no
warning.
version_warn=[0|1]
When this is on, which is the default, a warning will be issued
when the client version does not match the server version. This
option can be overridden by the client configuration files in
clientconfdir on the server.
client_lockdir=[path]
Path to the directory in which to keep per-client lock files. By
default, this is set to the path given by the 'directory'
option.
user=[username]
Run as a particular user. This can be overridden by the client
configuration files in clientconfdir on the server.
group=[groupname]
Run as a particular group. This can be overridden by the client
configuration files in clientconfdir on the server.
umask=[umask]
Set the file creation umask. Default is 0022.
ratelimit=[Mb/s]
Set the network send rate limit, in Mb/s. If this option is not
given, burp will send data as fast as it can.
network_timeout=[s]
Set the network timeout in seconds. If no data is sent or
received over a period of this length, burp will give up. The
default is 7200 seconds (2 hours).
working_dir_recovery_method=[resume|use|delete]
This option tells the server what to do when it finds the work‐
ing directory of an interrupted backup (perhaps somebody pulled
the plug on the server, or something). This can be overridden by
the client configurations files in clientconfdir on the server.
Options are...
delete: Just delete the old working directory.
use: Convert the working directory into a complete backup.
resume: Simply continue the previous backup from the point at which it
left off, at file granularity. NOTE: If the client has changed its
include/exclude configuration since the backup was interrupted, the
recovery method will automatically switch to 'use'.
resume_partial=[0|1]
Turn this on to enable 'resume partial' code. Requires 'work‐
ing_dir_recovery_method=resume'. When resuming an interrupted
transfer of a single file, it attempts to use previously trans‐
ferred blocks of that file in order to be more efficient. How‐
ever, situations have been reported where the file on the server
side just gets bigger forever, so this feature now defaults to
being turned off.
client_can_delete=[0|1]
Turn this off to prevent clients from deleting backups with the
'-a D' option. The default is that clients can delete backups.
Restore clients can override this setting.
client_can_force_backup=[0|1]
Turn this off to prevent clients from forcing backups with the
'-a b' option. Timed backups will still work. The default is
that clients can force backups.
client_can_list=[0|1]
Turn this off to prevent clients from listing backups with the
'-a l' option. The default is that clients can list backups.
Restore clients can override this setting.
client_can_restore=[0|1]
Turn this off to prevent clients from initiating restores with
the '-a r' option. The default is that clients can initiate
restores. Restore clients can override this setting.
client_can_verify=[0|1]
Turn this off to prevent clients from initiating a verify job
with the '-a v' option. The default is that clients can initiate
a verify job. Restore clients can override this setting.
restore_client=[client]
A client that is permitted to list, verify, restore and delete
files belonging to any other client. You may specify multiple
restore_clients. If this is too permissive, you may set a
restore_client for individual original clients in the individual
clientconfdir files. Note that restoring a backup from a Windows
computer onto a Linux computer will currently leave the VSS
headers in place at the beginning of each file. This will be
addressed in a future version of burp.
ssl_cert_ca=[path]
The path to the SSL CA certificate. This file will probably be
the same on both the server and the client. The file should con‐
tain just the certificate in PEM format. For more information on
this, and the other ssl_* options, please see docs/burp_ca.txt.
ssl_cert=[path]
The path to the server SSL certificate. It works for me when the
file contains the concatenation of the certificate and private
key in PEM format.
ssl_key=[path]
The path to the server SSL private key in PEM format.
ssl_key_password=[password]
The SSL key password.
ssl_cert_password=[password]
Synonym for ssl_key_password.
ssl_ciphers=[cipher list]
Allowed SSL ciphers. See openssl ciphers for details.
ssl_dhfile=[path]
Path to Diffie-Hellman parameter file. To generate one with
openssl, use a command like this: openssl dhparam -out
dhfile.pem -5 1024
max_children=[number]
Defines the number of child processes to fork (the number of
clients that can simultaneously connect. The default is 5.
max_status_children=[number]
Defines the number of status child processes to fork (the number
of status clients that can simultaneously connect. The default
is 5.
max_storage_subdirs=[number]
Defines the number of subdirectories in the data storage areas.
The maximum number of subdirectories that ext3 allows is 32000.
If you do not set this option, it defaults to 30000.
timer_script=[path]
Path to the script to run when a client connects with the timed
backup option. If the script exits with code 0, a backup will
run. The first two arguments are the client name and the path to
the 'current' storage directory. The next three arguments are
reserved, and user arguments are appended after that. An example
timer script is provided. The timer_script option can be over‐
ridden by the client configuration files in clientconfdir on the
server.
timer_arg=[string]
A user-definable argument to the timer script. You can have many
of these. The timer_arg options can be overridden by the client
configuration files in clientconfdir on the server.
notify_success_script=[path]
Path to the script to run when a backup succeeds. User arguments
are appended after the first five reserved arguments. An example
notify script is provided. The notify_success_script option can
be overriddden by the client configuration files in client‐
confdir on the server.
notify_success_arg=[string]
A user-definable argument to the notify success script. You can
have many of these. The notify_success_arg options can be over‐
riddden by the client configuration files in clientconfdir on
the server.
notify_success_warnings_only=[0|1]
Set to 1 to send success notifications when there were warnings.
If this and notify_success_changes_only are not turned on, suc‐
cess notifications are always sent.
notify_success_changes_only=[0|1]
Set to 1 to send success notifications when there were new or
changed files. If this and notify_success_warnings_only are not
turned on, success notifications are always sent.
notify_failure_script=[path]
The same as notify_success_script, but for backups that failed.
notify_failure_arg=[string]
The same as notify_success_arg, but for backups that failed.
dedup_group=[string]
Enables you to group clients together for file deduplication
purposes. For example, you might want to set 'dedup_group=xp'
for each Windows XP client, and then run the bedup program on a
cron job every other day with the option '-g xp'.
server_script_pre=[path]
Path to a script to run on the server after each successfully
authenticated connection but before any work is carried out. The
arguments to it are 'pre', '(client command)', 'reserved3' to
'reserved5', and then arguments defined by
server_script_pre_arg. If the script returns non-zero, the task
asked for by the client will not be run. This command and
related options can be overriddden by the client configuration
files in clientconfdir on the server.
server_script_pre_arg=[string]
A user-definable argument to the server pre script. You can have
many of these.
server_script_pre_notify=[0|1]
Turn on to send a notification email when the server pre script
returns non-zero. The output of the script will be included in
the email. The default is off. Most people will not want this
turned on because clients usually contact the server at 20
minute intervals and this could cause a lot of emails to be gen‐
erated. Requires the notify_failure options to be set.
server_script_post=[path]
Path to a script to run on the server before the client discon‐
nects. The arguments to it are 'post', '(client command)',
'reserved3' to 'reserved5', and then arguments defined by
server_script_post_arg. This command and related options can be
overriddden by the client configuration files in clientconfdir
on the server.
server_script_post_arg=[string]
A user-definable argument to the server post script. You can
have many of these.
server_script_post_notify=[0|1]
Turn on to send a notification email when the server post script
returns non-zero. The output of the script will be included in
the email. The default is off. Requires the notify_failure
options to be set.
server_script=[path]
You can use this to save space in your config file when you want
to run the same server script twice. It overrides
server_script_pre and server_script_post. This command and
related options can be overriddden by the client configuration
files in clientconfdir on the server.
server_script_arg=[path]
Goes with server_script and overrides server_script_pre_arg and
server_script_post_arg.
server_script_notify=[0|1]
Turn on to send a notification emails when the server pre and
post scripts return non-zero. The output of the script will be
included it the email. The default is off. Requires the
notify_failure options to be set.
server_script_post_run_on_fail=[0|1]
If this is set to 1, server_script_post will always be run. The
default is 0, which means that if the task asked for by the
client fails, server_script_post will not be run.
autoupgrade_dir=[path]
Path to autoupgrade directory from which upgrades are down‐
loaded. The option can be left unset in order not to autoupgrade
clients. Please see docs/autoupgrade.txt in the source package
for more help with this option.
ca_conf=[path]
Path to certificate authority configuration file. The CA config‐
uration file will usually be /etc/burp/CA.cnf. The CA directory
indicated by CA.cnf will usually be /etc/burp/CA. If ca_conf is
set and the CA directory does not exist, the server will create,
populate it, and the paths indicated by ssl_cert_ca, ssl_cert,
ssl_key and ssl_dhfile will be overwritten. For more detailed
information on this and the other ca_* options, please see
docs/burp_ca.txt.
ca_name=[name]
Name of the CA that the server will generate when using the
ca_conf option.
ca_server_name=[name]
The name that the server will put into its own SSL certficates
when using the ca_conf option.
ca_burp_ca=[path]
Path to the burp_ca script when using the ca_conf option.
CLIENT CONFIGURATION FILE OPTIONS
. [path]
Read an additional configuration file.
mode=client
Required to run in client mode.
server=[IP address or hostname]
Defines the server to connect to.
port=[port number]
Defines the TCP port that the server is listening on.
cname=[password]
Defines the client name to identify as to the server.
password=[password]
Defines the password to send to the server.
lockfile=[path]
Path to the lockfile that ensures that two client processes can‐
not run simultaneously (this currently doesn't work on Windows).
pidfile=[path]
Synonym for lockfile.
syslog=[0|1]
Log to syslog. Defaults to off.
stdout=[0|1]
Log to stdout. Defaults to on.
progress_counter=[0|1]
Print progress counters on stdout. Defaults to on.
user=[username]
Run as a particular user (not supported on Windows).
group=[groupname]
Run as a particular group (not supported on Windows).
ratelimit=[Mb/s]
Set the network send rate limit, in Mb/s. If this option is not
given, burp will send data as fast as it can.
network_timeout=[s]
Set the network timeout in seconds. If no data is sent or
received over a period of this length, burp will give up. The
default is 7200 seconds (2 hours).
ca_burp_ca=[path]
Path to the burp_ca script (burp_ca.bat on Windows). For more
information on this, please see docs/burp_ca.txt.
ca_csr_dir=[path]
Directory where certificate signing requests are generated. For
more information on this, please see docs/burp_ca.txt.
ssl_cert_ca=[path]
The path to the SSL CA certificate. This file will probably be
the same on both the server and the client. The file should con‐
tain just the certificate in PEM format. For more information on
this and the other ssl_* options, please see docs/burp_ca.txt.
ssl_cert=[path]
The path to the client SSL certificate. It works for me when the
file contains the concatenation of the certificate and private
key in PEM format.
ssl_key=[path]
The path to the client SSL private key in PEM format.
ssl_key_password=[password]
The SSL key password.
ssl_cert_password=[password]
Synonym for ssl_key_password.
ssl_peer_cn=[string]
Must match the common name in the SSL certificate that the
server gives when it connects. If ssl_peer_cn is not set, the
server name will be used instead.
ssl_ciphers=[cipher list]
Allowed SSL ciphers. See openssl ciphers for details.
server_can_restore=[0|1]
To prevent the server from initiating restores, set this to 0.
The default is 1.
encryption_password=[password]
Set this to enable client side file Blowfish encryption. If you
do not want encryption, leave this field out of your config
file. IMPORTANT: Configuring this renders delta differencing
pointless, since the smallest real change to a file will make
the whole file look different. Therefore, activating this option
turns off delta differencing so that whenever a client file
changes, the whole new file will be uploaded on the next backup.
ALSO IMPORTANT: If you manage to lose your encryption password,
you will not be able to unencrypt your files. You should there‐
fore think about having a copy of the encryption password some‐
where off-box, in case of your client hard disk failing.
FINALLY: If you change your encryption password, you will end up
with a mixture of files on the server with different encryption
and it may become tricky to restore more than one file at a
time. For this reason, if you change your encryption password,
you may want to start a fresh chain of backups (by moving the
original set aside, for example). Burp will cope fine with turn‐
ing the same encryption password on and off between backups, and
will restore a backup of mixed encrypted and unencrypted files
without a problem.
backup_script_pre=[path]
Path to a script to run before a backup. The arguments to it are
'pre', 'reserved2' to 'reserved5', and then arguments defined by
backup_script_pre_arg.
backup_script_pre_arg=[string]
A user-definable argument to the backup pre script. You can have
many of these.
backup_script_post=[path]
Path to a script to run after a backup. The arguments to it are
'post', [0|1] if the backup failed or succeeded, 'reserved3' to
'reserved5', and then arguments defined by
backup_script_post_arg.
backup_script_post_arg=[string]
A user-definable argument to the backup post script. You can
have many of these.
backup_script_post_run_on_fail=[0|1]
If this is set to 1, backup_script_post will be run whether the
backup succeeds or not. The default is 0, which means that
backup_script_post will only be run if the backup succeeds.
restore_script_pre=[path]
Path to a script to run before a restore. The arguments to it
are 'pre', 'reserved2' to 'reserved5', and then arguments
defined by restore_script_pre_arg.
restore_script_pre_arg=[string]
A user-definable argument to the restore pre script. You can
have many of these.
restore_script_post=[path]
Path to a script to run after a restore. The arguments to it are
'post', [0|1] if the restore failed or succeeded, 'reserved3' to
'reserved5', and then arguments defined by
restore_script_post_arg.
restore_script_post_arg=[string]
A user-definable argument to the restore post script. You can
have many of these.
restore_script_post_run_on_fail=[0|1]
If this is set to 1, restore_script_post will be run whether the
restore succeeds or not. The default is 0, which means that
restore_script_post will only be run if the restore succeeds.
backup_script=[path]
You can use this to save space in your config file when you want
to run the same script before and after a backup. It overrides
backup_script_pre and backup_script_post.
backup_script_arg=[path]
Goes with backup_script and overrides backup_script_pre_arg and
backup_script_post_arg.
restore_script=[path]
You can use this to save space in your config file when you want
to run the same script before and after a restore. It overrides
restore_script_pre and restore_script_post.
restore_script_arg=[path]
Goes with restore_script and overrides restore_script_pre_arg
and restore_script_post_arg.
autoupgrade_dir=[path]
Path to autoupgrade directory into which upgrades are down‐
loaded. Please see docs/autoupgrade.txt in the source package
for more help with this option. If you do not want your client
to autoupgrade, do not set this option.
autoupgrade_os=[string]
Name of the client operating system. Should match a directory
name in the server's autoupgrade_dir. If you do not want your
client to autoupgrade, do not set this option.
INCLUDES / EXCLUDES
The following options specify exactly what is backed up. The client can
specify these options, or if you have at least one 'include=' or
'include_glob=' in the client configuration files on the server, the
server will override them all.
include=[path]
Path to include in the backup. You can have multiple include
lines. Use forward slashes '/', not backslashes '\' as path
delimiters.
exclude=[path]
Path to exclude from the backup. You can have multiple exclude
lines. Use forward slashes '/', not backslashes '\' as path
delimiters.
include_regex=[regular expression]
Not implemented.
include_glob=[glob expression]
Include paths that match the glob expression. For example,
'/home/*/Documents' will include '/home/user1/Documents' and
'/home/user2/Documents' if user1 and user2 exist. On Unix sys‐
tems, glob(3) is used. For Windows systems, the functionality is
limited to one '*'.
exclude_regex=[regular expression]
Exclude paths that match the regular expression.
include_ext=[extension]
Extensions to include in the backup. Case insensitive. Nothing
else will be included in the backup. You can have multiple
include extension lines. For example, set 'txt' to include files
that end in '.txt'. You need to specify an 'include' line so
that burp knows where to start looking.
exclude_ext=[extension]
Extensions to exclude from the backup. Case insensitive. You can
have multiple exclude extension lines. For example, set 'vdi' to
exclude VirtualBox disk images.
exclude_comp=[extension]
Extensions to exclude from compression. Case insensitive. You
can have multiple exclude compression lines. For example, set
'gz' to exclude gzipped files from compression.
exclude_fs=[fstype]
File systems to exclude from the backup. Case insensitive. You
can have multiple exclude file system lines. For example, set
'tmpfs' to exclude tmpfs. Burp has an internal mapping of file
system names to file system IDs. If you know the file system ID,
you can use that instead. For example, 'exclude_fs = 0x01021994'
will also exclude tmpfs.
min_file_size=[b/Kb/Mb/Gb]
Do not back up files that are less than the specified size.
Example: 'min_file_size = 10Mb'. Set to 0 (the default) to have
no limit.
max_file_size=[b/Kb/Mb/Gb]
Do not back up files that are greater than the specified size.
Example: 'max_file_size = 10Mb'. Set to 0 (the default) to have
no limit.
cross_filesystem=[path]
Allow backups to cross a particular filesystem mountpoint.
cross_all_filesystems=[0|1]
Allow backups to cross all filesystem mountpoints.
nobackup=[file name]
If this file system entry exists, the directory containing it
will not be backed up.
read_fifo=[path]
Do not back up the given fifo itself, but open it for reading
and back up the contents as if it were a regular file.
read_all_fifos=[0|1]
Open all fifos for reading and back up the contents as if they
were regular files.
read_blockdev=[path]
Do not back up the given block device itself, but open it for
reading and back up the contents as if it were a regular file.
read_all_blockdevs=[0|1]
Open all block devices for reading and back up the contents as
if they were regular files.
split_vss=[0|1]
When backing up Windows computers, this option allows you to
save the VSS header data separate from the file data. The
default is off, which means that the VSS header data is saved
prepended to the file data.
strip_vss=[0|1]
When backing up Windows computers, this option allows you to
prevent the VSS header data being backed up. The default is off.
To restore a backup that has no VSS information on Windows, you
need to give the client the '-x' command line option.
vss_drives=[list of drive letters]
When backing up Windows computers, this option allows you to
specify which drives have VSS snapshots taken of them. If you
omit this option, burp will automatically decide based on the
'include' options. If you want no drives to have snapshots taken
of them, you can specify '0'.
atime=[0|1]
This allows you to control whether the client uses O_NOATIME
when opening files and directories. The default is 0, which
enables O_NOATIME. This means that the client can read files and
directories without updating the access times. However, this is
only possible if you are running as root, or are the owner of
the file or directory. If this is not the case (perhaps you only
have group or world access to the files), you will get errors
until you set atime=1. With atime=1, the access times will be
updated on the files and directories that get backed up. As an
alternative, you may consider setting capability 'CAP_FOWNER' on
the client burp binary - see 'man capabilities'.
SERVER CLIENTCONFDIR FILE
For the server to know about clients that can contact it, you need to
place a file named after the client in clientconfdir. Files beginning
with '.' or ending with '~' are ignored. Directories are also ignored.
The file name must match the name in the 'cname' field on the client.
ssl_peer_cn=[string] must match the common name in the SSL certificate
that the client gives when it connects. If ssl_peer_cn is not set, the
client name will be used instead (the clientconfdir file name).
The file needs to contain a line like password=[password] that matches
the same field on the client, or passwd=[encrypted password] - where
the plain text password on the client will be tested against an
encrypted password of the kind you might find in /etc/passwd.
Additionally, the following options can be overridden here for each
client:
directory directory_tree timestamp_format password_check keep
working_dir_recovery_method resume_partial librsync man‐
ual_delete version_warn syslog client_can_delete
client_can_force_backup client_can_list client_can_restore
client_can_verify restore_client compression hard_quota
soft_quota timer_script timer_arg notify_success_script
notify_success_arg notify_success_warnings_only notify_fail‐
ure_script notify_failure_arg dedup_group server_script_pre
server_script_pre_arg server_script_pre_notify
server_script_post server_script_post_arg
server_script_post_notify server_script server_script_arg
server_script_notify server_script_post_run_on_fail
Additionally, the includes and excludes can be overridden here, as
described in the section above.
As with the other configuration files, extra configuration can be
included with the '. path/to/config/file' syntax.
Some notes on SSL certificates
The burp example configs come with example SSL certificates and keys.
You can use these and burp will work. But if you are worried about net‐
work security, you should generate your own certificates and keys and
point your config files to them. To create the example files, I used a
handy interface to openssl, called 'tinyca' (http://tinyca.sm-
zone.net/). If you are using Debian, you can run 'apt-get install
tinyca' to get it. There is also the option of using burp_ca, which you
can find in the source distribution, courtesy of Patrick Koppen.
Examining backups
As well as using the client list options described above, you can go
directly to the storage directory on the server. The backups for a
client are in the directory named after the client. Inside each backup
directory is a file called manifest.gz.
This contains a list of all the files in the backup, and where they
originally came from on the client.
There is also a 'log.gz' file in the backup directory, which contains
the output generated by the server during the backup.
The 'data' directory contains complete backup files.
The 'deltas.reverse' directory contains reverse deltas that can be
applied to the data from the next backup in the sequence (indicated by
the contents of the 'forward' file).
Anything with a .gz suffix is compressed in gzip format. You can use
standard tools, such as zcat, zless or cp, to view them or copy them
elsewhere. Files from Windows backups will probably contain VSS headers
and/or footers. For help stripping these, see the vss_strip man page.
Server initiated backups
You can queue a backup on the server, to be performed when the client
next makes contact. To do this, you put a file called 'backup' into the
top level of the client storage directory. The contents of the file are
ignored.
Server initiated restores
You can queue a restore on the server, to be performed when the client
next makes contact. To do this, you put a file called 'restore' into
the top level of the client storage directory. The client can deny
server initiated restores by setting "server_can_restore=0" in its
burp.conf. Valid fields to include in the restore file are:
orig_client=[client]
The original client to restore from. Equivalent to '-C' when
initiating a restore from a client. Do not include this line
when restoring to the original client. See also the
'restore_client' server option.
backup=[number|a]
The number of the backup to restore from. Equivalent to '-b'
when initiating a restore from the client.
overwrite=[0|1]
Whether to overwrite existing files. Equivalent to '-f' when
initiating a restore from the client.
strip=[number]
Number of leading path components to strip. Equivalent to '-s'
when initiating a restore from the client.
restoreprefix=[path]
Prefix to the restore path. Equivalent to '-d' when initiating a
restore from the client.
regex=[regular expression]
Only restore files matching the regular expression. Equivalent
to '-r' when initiating a restore from the client.
include=[path]
Restore directories and files that match the path. If it is a
directory, the contents of the directory will be restored. You
can have multiple 'include' lines. There is no equivalent when
initiating a restore from the client.
As a minimum, the 'restore' file needs to contain a 'backup' option.
SIGNALS
Sending signal 1 (HUP) to the main server process will cause it to
reload. For the vast majority of configuration changes, a reload is
unnecessary as the server will pick up changes "on-the-fly". Sending
signal 12 (USR2) to the main server process will cause it to wait until
there are no longer any child processes, and then exit. The intention
is to help with upgrades without interrupting current backups. if you
are running upstart, a new burp server process will start up when the
old one exits.
BUGS
If you find bugs, please report them to the email list. See the website
<http://burp.grke.net/> for details.
AUTHOR
The main author of Burp is Graham Keeling.
COPYRIGHT
See the LICENCE file included with the source distribution.
Burp Burp(8)