CPM(1)CPM(1)NAMEcpm - read and write CP/M® floppy disks
SYNOPSIScpm [ options ] [ filename ]
DESCRIPTION
Cpm reads and writes files with an internal structure like a CP/M file
system. By default cpm assumes that the specified file has the parame‐
ters of a standard IBM format single sided single density 8" CP/M
floppy disk, i.e., 2002 records containing 128 bytes each, of which 52
are reserved for system use and 16 (2 blocks) are used by the directory
(maximum 64 directory entries). These parameters may be changed by
specifying the appropriate flags (see below). Thus, various double den‐
sity formats may also be read and written, provided that the hardware
can handle the actual format.
The specified file may be a floppy disk drive (e.g., /dev/floppy on an
11/780 or /dev/rrx?b if rx02 drives are available on your system), or a
standard UNIX™ file with the appropriate structure. Since it may be
inconvenient (and slow) to access the device directly, in particular
the console floppy on an 11/780, it is always a good idea to copy the
contents of the diskette into a standard file using dd(1), e.g.,
dd if=/dev/floppy of=yourfile bs=128 count=2002
On most systems you have to be superuser to access the console floppy
and to be able to write to rx02's.
Flags:
-d display directory on standard output
-B the files specified with the c or C flag contain
binary code rather than plain text (default)
-c name1 name2 copy the CP/M file name1 to the UNIX file name2
-C name1 name2 copy the UNIX file name1 to the CP/M file name2
-p name copy the specified CP/M file to standard output
-i enter interactive mode (all the above flags are
turned off)
-I force initializtion of the specified CP/M file
(e.g., delete all files)
-sn skew factor (sector interleaving); default is 6
-bn block size (in bytes); default is 1K bytes
-mn max number of directory entries; default is 64
-ln sector size (in bytes); default is 128
-rn number of sectors per track; default is 26
-tn number of tracks; default is 77
-Rn number of reserved tracks (i. e., for the bootstrap
system); default is 2
If the -i flag is specified, the filename argument must always be
present. If the specified file does not exist, a new file will be ini‐
tialized. The -C, -c and -p flags are mutually exclusive.
The following commands are available in interactive mode:
ccopyin unixfile cpmfile
copy UNIX binary file to CP/M
ccopyout cpmfile unixfile
copy CP/M binary file to UNIX
copyin unixfile cpmfile copy UNIX text file to CP/M
copyout cpmfile unixfile
copy CP/M text file to UNIX
del[ete] filename a synonym for erase
dir[ectory] or ls display directory
era[se] filename delete the given file
hel[p] print a short description of each command
log[out] or exi[t] terminate, return to the shell
ren[ame] file1 file2 rename file1 to file2
typ[e] filename print CP/M file to console; if the environment
variable PAGER exists, it is interpreted as a
command to pipe the output through
The commands may be abbreviated as indicated by brackets. CP/M file
names are automatically converted to upper case. The copy commands
refuse to overwrite any existing files.
If the CP/M floppy file becomes full during a file transfer from UNIX,
the file is closed and the command terminated. The data already writ‐
ten to the CP/M file will be saved.
The copyout command assumes that CP/M text files have cr+lf as line
terminators and removes carriage returns. Copyin adds a carriage
return in front of each line-feed, and adds a ^Z to the end of the
file. The binary copy commands provide for ``raw'' file copying, thus
making it possible to copy code files to and from diskettes.
Interrupts are recognized in interactive mode, and will return you to
the command level.
FILES
/dev/floppy
/dev/rrx?b
/usr/new/lib/cpm.hlp
SEE ALSOdd(1), rx(4v)BUGS
CP/M user numbers are ignored, files written to the CP/M floppy file
will always have user number 0.
CP/M filename extensions containing more than 3 characters will quietly
be truncated.
Wildcards are not supported.
Binary input/output is always handled in multiples of the physical sec‐
tor size; CP/M handles it in multiples of 128 byte records.
TRADEMARKS
CP/M is a registered trademark of Digital Research, Inc.
UNIX is a trademark of AT&T Bell Labs.
HISTORY
The original program has been written in 1982 and 1983 by Helge
Skrivervik at the University of California, Berkeley. It has been
adapted by Joerg Wunsch (joerg_wunsch@uriah.sax.de), to make it work
with double density disks, especially with those having block numbers >
255. After getting written permission by Helge Skrivervik to redis‐
tribute the program under a Berkeley-style Copyright, it has been made
available with the FreeBSD distribution in 1994.
AUTHOR
Helge Skrivervik (now [1994] helge@mellvik.no)
4th Berkeley Distribution 3 May 1983 CPM(1)