ECC(4) BSD Kernel Interfaces Manual ECC(4)NAMEecc — ECC memory controller support
SYNOPSIS
To load this driver as a module at boot time, place the following line in
loader.conf(5):
ecc_load="YES"
DESCRIPTION
The ecc device attaches to an ECC memory controller. If ECC support is
enabled in the BIOS, the device will poll the controller once a second
and report any corrections or uncorrectable errors.
HARDWARE
Currently, only the AMD64's memory controller is supported.
HISTORY
The ecc device driver first appeared in DragonFly 1.7.
AUTHORS
The ecc driver was written by Matthew Dillon.
BSD October 10, 2006 BSD