MRTG-MYSQL-LOAD(1)mrtg-mysql-loadMRTG-MYSQL-LOAD(1)NAMEmrtg-mysql-load - a MySQL load analysis fetcher for MRTG
SYNOPSIS
mrtg-mysq-load [ -h hostname ] [ -P port ] [ -u username ] [ -p pass‐
word ] [ -c /path/to/config/file ] [ -o ] [ -d ] [ -v ] [ -l
/path/to/log/file ]
DESCRIPTIONmrtg-mysql-load runs mysqladmin (which is assumed to be available on
the host), passing the -h, -P, -u and -p options as they are given. On
normal exit, mrtg-mysql-load writes each of the values of questions,
slow queries, uptime and version to stdout, one line per value.
It is meant to be called by the Multi Router Traffic Grapher (MRTG).
INSTALLING
Please see the file INSTALLING for examples.
OPTIONS-h the hostname to query (as -h for mysqladmin).
-P The port on which to talk with the MySQL server (as -P for
mysqladmin).
-u The MySQL username to use
-p The password to use when calling mysqladmin. Note that mrtg-
mysql-load, unlike mysqladmin, doesn't care whether you put
whitespace between the -p and the password or not.
-c Read the values for host, port, username and password from a
configuration file. The configuration file consists of lines of
the form var=value, where var is one of 'host', 'port', 'user‐
name' or 'password' and value is the (unquoted) corresponding
value. Blank lines may be added to the configuration file for
readability, and comments may be entered on separate lines
starting with '#'.
If the same value is defined in the configuration file and on
the command line, the value on the command line takes precence.
-o Print the command that would have been used to call mysqladmin
using the given options and configuration file, then exit.
-d Will print a lot of very ugly debugging info to stderr. Mostly
good for demonstrating the programmer's lack of trust in his
Perl skills.
-v Print version information to stdout, then exit.
-l The name of an optional log file. This file will log all output
(including error messages) generated by the program to that
file.
RETURN VALUE
The program exits with an exit value 0, if it believes it was success‐
ful.
USING CONFIGURATION FILES
When using mrtg-mysql-load with mrtg, there are several places that may
define the parameters used for connection. As noted above, mrtg-mysql-
load is a wrapper around the mysqladmin program. mysqladmin will first
search for its parameters from the files /etc/my.cnf and ~/my.cnf, hav‐
ing options in the latter overriding those of the first.
mrtg-mysql-load uses the command line of mysqladmin to specify the
parameters, and these will override any options set by mysqladmin's
configuration files. Thus, parameters set in mrtg-mysql-load's configu‐
ration file will override any options set in /etc/my.cnf and/or
~/my.cnf.
Any options set on the command line of mrtg-mysql-load will override
any other options set by one of the previous methods. The command line
switches are most frequently used directly in the mrtg config file,
when specifying the Target option:
`Target[trgt.MySQL]: `/path/to/mrtg-mysql-load -opt1 val1 -opt2 val2
... `'
To sum up, the parameters used when specifying the parameters for mak‐
ing a connection to the MySQL server may be specified in no less than 4
places, which are, in increasing order of precedence,
· /etc/my.cnf
· ~/my.cnf
· a configuration file for mrtg-mysql-load specified by the -c param‐
eter
· switches set on the command line (or, more frequently, in the mrtg
config file).
EXAMPLESmrtg-mysql-load
This is the most basic way to call mrtg-mysql-load. It will work,
too, if run on the same host as mysqld and mysqld is configured to
let local users connect. (By default, it does, though I believe
this is a really stupid decision on the part of the developers. You
really should set permissions in MySQL to disallow this.
mrtg-mysql-load-h <mysql.host.name> -u <username> -p <password>
The format you would most likely use for calling mrtg-mysql-load.
· An example mrtg configuration file, mrtg-cfg.example, is provided
in the document directory of the distribution.
· An example mrtg-mysql-load configuration file, mysql-load-cfg.exam‐
ple, is provided in the document directory of the distribution.
FILESmrtg-mysql-load uses mysqladmin, which is assumed to be available in
the path of the user running the program.
SEE ALSOmrtg(1), mrtg-cfg.example, mysql-load-cfg.example
http://www.mrtg.org/
http://www.bitbybit.dk/mysqlfaq/mrtg-mysql-load/
DIAGNOSTICS
ERROR: ignoring superfluous arguments
mrtg-mysql-load doesn't take any command-line arguments. If you get
this message, you most likely forgot to specify a switch name.
ERROR: Can't open mysqladmin ...
mysqladmin could not be run. Check that mysqladmin is available and
that the user running mrtg-mysql-load has the proper permissions.
ERROR: mysqladmin returned an error message: ...
mysqladmin did run, but hit a snag, probably when connecting to the
server. Check the displayed error message, and/or check whether you
have specified the correct host, username and password.
ERROR: Unable to read config file ...
mrtg-mysql-load could not open the config file specified by the -c
switch. Make sure the file exists and that the user running mrtg-
mysql-load has the permissions to read it.
Error: I don't understand line xx of <configfile>
There was an error on line xx of the configuration file. Each line
must either be blank, start with a '#' to mark it as a comment, or
have the form var=value, where var is one of 'host', 'port', 'user‐
name' or 'password' and value is the (unquoted) corresponding
value.
ERROR: could not find match for 'xxx' in mysqladmin output ...
mysqladmin returned some output, but it was not formatted as
expected. Your particular version of mysqladmin may not match the
author's. The current version of mrtg-mysql-load was written for
mysql v. 3.23.35; Please contact the author with more information,
and he'll try to make it match your particular version.
RESTRICTIONSmrtg-mysql-load is a Perl script. It has been created with and tested
on Perl v. 5.6.0-i386-linux. Minimum requirement is Perl 5.003.
mrtg-mysql-load relies on access to mysqladmin. If mysqladmin is not
installed on the machine, or the user running mrtg-mysql-load does not
have the proper permissions to run mysqladmin, the program will fail.
The <MySQL> server must be configured with a user capable of connecting
to the server and retrieve the information.
BUGS
The -t option which was available in previous versions, has now been
removed. It seems to have been removed from recent versions of mysqlad‐
min, and it caused a lot of trouble anyway -- at least according to
users on the MySQL mailing list.
Most error messages are written to stdout as well as stderr. This may
cause some confusion, if the program is run from the console.
COPYRIGHT
Copyright (c) 2001 Carsten H. Pedersen <carsten.pedersen@bitbybit.dk>.
All Rights Reserved.
See the file COPYRIGHT in the distribution for the exact terms.
AUTHOR
Written by Carsten H. Pedersen <carsten.pedersen@bitbybit.dk>.
3rd Berkeley Distribution perl v5.6.0 MRTG-MYSQL-LOAD(1)