XSDCXX(1)XSDCXX(1)NAMExsdcxx - W3C XML Schema to C++ Compiler
SYNOPSISxsdcxx command [ options ] file [ file ...]
xsdcxx help [ command ]
xsdcxx version
DESCRIPTIONxsdcxx generates vocabulary-specific, statically-typed C++ mapping from
W3C XML Schema definitions. Particular mapping to produce is selected
by a command. Each mapping has a number of mapping-specific options
that should appear, if any, after the command. Input files should be
W3C XML Schema definitions. The exact set of the generated files
depends on the selected mapping and options.
COMMANDS
cxx-tree
Generate the C++/Tree mapping. For each input file in the form
name.xsd the following C++ files are generated: name.hxx (header
file), name.ixx (inline file, generated only if the --generate-
inline option is specified), name.cxx (source file), and name-
fwd.hxx (forward declaration file, generated only if the --gen‐
erate-forward option is specified).
cxx-parser
Generate the C++/Parser mapping. For each input file in the form
name.xsd the following C++ files are generated: name-pskel.hxx
(parser skeleton header file), name-pskel.ixx (parser skeleton
inline file, generated only if the --generate-inline option is
specified), and name-pskel.cxx (parser skeleton source file). If
the --generate-noop-impl or --generate-print-impl option is
specified, the following additional sample implementation files
are generated: name-pimpl.hxx (parser implementation header
file) and name-pimpl.cxx (parser implementation source file). If
the --generate-test-driver option is specified, the additional
name-driver.cxx test driver file is generated.
help Print usage information and exit. Use
xsdcxx help command
for command-specific help.
version
Print version and exit.
OPTIONS
Command-specific options, if any, should appear after the corresponding
command.
common options
--std version
Specify the C++ standard that the generated code should conform
to. Valid values are c++98 (default) and c++11.
The C++ standard affects various aspects of the generated code
that are discussed in more detail in various mapping-specific
documentation. Overall, when C++11 is selected, the generated
code relies on the move semantics and uses std::unique_ptr
instead of deprecated std::auto_ptr.
When the C++11 mode is selected, you normally don't need to per‐
form any extra steps other than enable C++11 in your C++ com‐
piler, if required. The XSDCXX compiler will automatically add
the necessary macro defines to the generated header files that
will switch the header-only XSDCXX runtime library (libxsd) to
the C++11 mode. However, if you include any of the XSDCXX run‐
time headers directly in your application (normally you just
include the generated headers), then you will need to define the
XSD_CXX11 macro for your entire project.
--char-type type
Generate code using the provided character type instead of the
default char. Valid values are char and wchar_t.
--char-encoding enc
Specify the character encoding that should be used in the gener‐
ated code. Valid values for the char character type are utf8
(default), iso8859-1, lcp (Xerces-C++ local code page), and cus‐
tom. If you pass custom as the value then you will need to
include the transcoder implementation header for your encoding
at the beginning of the generated header files (see the --hxx-
prologue option).
For the wchar_t character type the only valid value is auto and
the encoding is automatically selected between UTF-16 and
UTF-32/UCS-4, depending on the wchar_t type size.
--output-dir dir
Write generated files to dir instead of the current directory.
--generate-inline
Generate simple functions inline. This option triggers creation
of the inline file.
--generate-xml-schema
Generate a C++ header file as if the schema being compiled
defines the XML Schema namespace. For the C++/Tree mapping, the
resulting file will contain definitions for all XML Schema
built-in types. For the C++/Parser mapping, the resulting file
will contain definitions for all the parser skeletons and imple‐
mentations corresponding to the XML Schema built-in types.
The schema file provided to the compiler need not exist and is
only used to derive the name of the resulting header file. Use
the --extern-xml-schema option to include this file in the gen‐
erated files for other schemas.
--extern-xml-schema file
Include a header file derived from file instead of generating
the XML Schema namespace mapping inline. The provided file need
not exist and is only used to derive the name of the included
header file. Use the --generate-xml-schema option to generate
this header file.
--namespace-map xns=cns
Map XML Schema namespace xns to C++ namespace cns. Repeat this
option to specify mapping for more than one XML Schema names‐
pace. For example, the following option:
--namespace-map http://example.com/foo/bar=foo::bar
Will map the http://example.com/foo/bar XML Schema namespace to
the foo::bar C++ namespace.
--namespace-regex regex
Add regex to the list of regular expressions used to translate
XML Schema namespace names to C++ namespace names. regex is a
Perl-like regular expression in the form /pattern/replacement/.
Any character can be used as a delimiter instead of /. Escaping
of the delimiter character in pattern or replacement is not sup‐
ported.
All the regular expressions are pushed into a stack with the
last specified expression considered first. The first match that
succeeds is used. Regular expressions are applied to a string
in the form
filename namespace
For example, if you have file hello.xsd with namespace
http://example.com/hello and you run xsd on this file, then the
string in question will be:
hello.xsd. http://example.com/hello
For the built-in XML Schema namespace the string is:
XMLSchema.xsd http://www.w3.org/2001/XMLSchema
The following three steps are performed for each regular expres‐
sion until the match is found:
1. The expression is applied and if the result is empty the next
expression is considered.
2. All / are replaced with ::.
3. The result is verified to be a valid C++ scope name (e.g.,
foo::bar). If this test succeeds, the result is used as a C++
namespace name.
As an example, the following expression maps XML Schema names‐
paces in the form http://example.com/foo/bar to C++ namespaces
in the form foo::bar:
%.* http://example.com/(.+)%$1%
See also the REGEX AND SHELL QUOTING section below.
--namespace-regex-trace
Trace the process of applying regular expressions specified with
the --namespace-regex option. Use this option to find out why
your regular expressions don't do what you expected them to do.
--reserved-name n[=r]
Add name n to the list of names that should not be used as iden‐
tifiers. The name can optionally be followed by = and the
replacement name r that should be used instead. All the C++ key‐
words are already in this list.
--include-with-brackets
Use angle brackets (<>) instead of quotes ("") in generated
#include directives.
--include-prefix prefix
Add prefix to generated #include directive paths.
For example, if you had the following import element in your
schema
<import namespace="..." schemaLocation="base.xsd"/>
and compiled this fragment with --include-prefix schemas/, then
the include directive in the generated code would be:
#include "schemas/base.hxx"
--include-regex regex
Add regex to the list of regular expressions used to transform
#include directive paths. regex is a Perl-like regular expres‐
sion in the form /pattern/replacement/. Any character can be
used as a delimiter instead of /. Escaping of the delimiter
character in pattern or replacement is not supported.
All the regular expressions are pushed into a stack with the
last specified expression considered first. The first match that
succeeds is used.
As an example, the following expression transforms paths in the
form schemas/foo/bar to paths in the form generated/foo/bar:
%schemas/(.+)%generated/$1%
See also the REGEX AND SHELL QUOTING section below.
--include-regex-trace
Trace the process of applying regular expressions specified with
the --include-regex option. Use this option to find out why your
regular expressions don't do what you expected them to do.
--guard-prefix prefix
Add prefix to generated header inclusion guards. The prefix is
transformed to upper case and characters that are illegal in a
preprocessor macro name are replaced with underscores. If this
option is not specified then the directory part of the input
schema file is used as a prefix.
--hxx-suffix suffix
Use the provided suffix instead of the default .hxx to construct
the name of the header file. Note that this suffix is also used
to construct names of header files corresponding to
included/imported schemas.
--ixx-suffix suffix
Use the provided suffix instead of the default .ixx to construct
the name of the inline file.
--cxx-suffix suffix
Use the provided suffix instead of the default .cxx to construct
the name of the source file.
--fwd-suffix suffix
Use the provided suffix instead of the default -fwd.hxx to con‐
struct the name of the forward declaration file.
--hxx-regex regex
Use the provided expression to construct the name of the header
file. regex is a Perl-like regular expression in the form /pat‐
tern/replacement/. Note that this expression is also used to
construct names of header files corresponding to
included/imported schemas. See also the REGEX AND SHELL QUOTING
section below.
--ixx-regex regex
Use the provided expression to construct the name of the inline
file. regex is a Perl-like regular expression in the form /pat‐
tern/replacement/. See also the REGEX AND SHELL QUOTING section
below.
--cxx-regex regex
Use the provided expression to construct the name of the source
file. regex is a Perl-like regular expression in the form /pat‐
tern/replacement/. See also the REGEX AND SHELL QUOTING section
below.
--fwd-regex regex
Use the provided expression to construct the name of the forward
declaration file. regex is a Perl-like regular expression in the
form /pattern/replacement/. See also the REGEX AND SHELL QUOTING
section below.
--hxx-prologue text
Insert text at the beginning of the header file.
--ixx-prologue text
Insert text at the beginning of the inline file.
--cxx-prologue text
Insert text at the beginning of the source file.
--fwd-prologue text
Insert text at the beginning of the forward declaration file.
--prologue text
Insert text at the beginning of each generated file for which
there is no file-specific prologue.
--hxx-epilogue text
Insert text at the end of the header file.
--ixx-epilogue text
Insert text at the end of the inline file.
--cxx-epilogue text
Insert text at the end of the source file.
--fwd-epilogue text
Insert text at the end of the forward declaration file.
--epilogue text
Insert text at the end of each generated file for which there is
no file-specific epilogue.
--hxx-prologue-file file
Insert the content of the file at the beginning of the header
file.
--ixx-prologue-file file
Insert the content of the file at the beginning of the inline
file.
--cxx-prologue-file file
Insert the content of the file at the beginning of the source
file.
--fwd-prologue-file file
Insert the content of the file at the beginning of the forward
declaration file.
--prologue-file file
Insert the content of the file at the beginning of each gener‐
ated file for which there is no file-specific prologue file.
--hxx-epilogue-file file
Insert the content of the file at the end of the header file.
--ixx-epilogue-file file
Insert the content of the file at the end of the inline file.
--cxx-epilogue-file file
Insert the content of the file at the end of the source file.
--fwd-epilogue-file file
Insert the content of the file at the end of the forward decla‐
ration file.
--epilogue-file file
Insert the content of the file at the end of each generated file
for which there is no file-specific epilogue file.
--export-symbol symbol
Insert symbol in places where DLL export/import control state‐
ments (__declspec(dllexport/dllimport)) are necessary.
--export-xml-schema
Export/import types in the XML Schema namespace using the export
symbol provided with the --export-symbol option. The
XSD_NO_EXPORT macro can be used to omit this code during C++
compilation, which may be useful if you would like to use the
same generated code across multiple platforms.
--export-maps
Export polymorphism support maps from a Win32 DLL into which
this generated code is placed. This is necessary when your type
hierarchy is split across several DLLs since otherwise each DLL
will have its own set of maps. In this situation the generated
code for the DLL which contains base types and/or substitution
group heads should be compiled with this option and the gener‐
ated code for all other DLLs should be compiled with --import-
maps. This option is only valid together with --generate-poly‐
morphic. The XSD_NO_EXPORT macro can be used to omit this code
during C++ compilation, which may be useful if you would like to
use the same generated code across multiple platforms.
--import-maps
Import polymorphism support maps to a Win32 DLL or executable
into which this generated code is linked. See the --export-maps
option documentation for details. This options is only valid
together with --generate-polymorphic. The XSD_NO_EXPORT macro
can be used to omit this code during C++ compilation, which may
be useful if you would like to use the same generated code
across multiple platforms.
--generate-dep
Generate make dependency information. This option triggers the
creation of the .d file containing the dependencies of the gen‐
erated files on the main schema file as well as all the schema
files that it includes/imports, transitively. This dependency
file is then normally included into the main makefile to imple‐
ment automatic dependency tracking.
Note also that automatic dependency generation is not supported
in the file-per-type mode (--file-per-type). In this case, all
the generated files are produced with a single compiler invoca‐
tion and depend on all the schemas. As a result, it is easier to
establish such a dependency manually, perhaps with the help of
the --file-list* options.
--generate-dep-only
Generate make dependency information only.
--dep-phony
Generate phony targets for included/imported schema files, caus‐
ing each to depend on nothing. Such dummy rules work around make
errors caused by the removal of schema files without also updat‐
ing the dependency file to match.
--dep-target target
Change the target of the dependency rule. By default it contains
all the generated C++ files as well as the dependency file
itself, without any directory prefixes. If you require multiple
targets, then you can specify them as a single, space-separated
argument or you can repeat this option multiple times.
--dep-suffix suffix
Use the provided suffix instead of the default .d to construct
the name of the dependency file.
--dep-regex regex
Use the provided expression to construct the name of the depen‐
dency file. regex is a Perl-like regular expression in the form
/pattern/replacement/. See also the REGEX AND SHELL QUOTING sec‐
tion below.
--disable-warning warn
Disable printing warning with id warn. If all is specified for
the warning id then all warnings are disabled.
--options-file file
Read additional options from file. Each option should appearing
on a separate line optionally followed by space and an option
value. Empty lines and lines starting with # are ignored. Option
values can be enclosed in double (") or single (') quotes to
preserve leading and trailing whitespaces as well as to specify
empty values. If the value itself contains trailing or leading
quotes, enclose it with an extra pair of quotes, for example
'"x"'. Non-leading and non-trailing quotes are interpreted as
being part of the option value.
The semantics of providing options in a file is equivalent to
providing the same set of options in the same order on the com‐
mand line at the point where the --options-file option is speci‐
fied except that the shell escaping and quoting is not required.
You can repeat this option to specify more than one options
file.
--show-sloc
Show the number of generated physical source lines of code
(SLOC).
--sloc-limit num
Check that the number of generated physical source lines of code
(SLOC) does not exceed num.
--proprietary-license
Indicate that the generated code is licensed under a proprietary
license instead of the GPL.
--custom-literals file
Load custom XML string to C++ literal mappings from file. This
mechanism can be useful if you are using a custom character
encoding and some of the strings in your schemas, for example
element/attribute names or enumeration values, contain non-ASCII
characters. In this case you will need to provide a custom map‐
ping to C++ literals for such strings. The format of this file
is specified in the custom-literals.xsd XML Schema file that can
be found in the documentation directory.
--preserve-anonymous
Preserve anonymous types. By default anonymous types are auto‐
matically named with names derived from the enclosing ele‐
ments/attributes. Because mappings implemented by this compiler
require all types to be named, this option is only useful if you
want to make sure your schemas don't have anonymous types.
--show-anonymous
Show elements and attributes that are of anonymous types. This
option only makes sense together with the --preserve-anonymous
option.
--anonymous-regex regex
Add regex to the list of regular expressions used to derive
names for anonymous types from the enclosing attributes/ele‐
ments. regex is a Perl-like regular expression in the form /pat‐
tern/replacement/. Any character can be used as a delimiter
instead of /. Escaping of the delimiter character in pattern or
replacement is not supported.
All the regular expressions are pushed into a stack with the
last specified expression considered first. The first match that
succeeds is used. Regular expressions are applied to a string
in the form
filename namespace xpath
For instance:
hello.xsd http://example.com/hello element
hello.xsd http://example.com/hello type/element
As an example, the following expression makes all the derived
names start with capital letters. This could be useful when your
naming convention requires type names to start with capital let‐
ters:
%.* .* (.+/)*(.+)%\u$2%
See also the REGEX AND SHELL QUOTING section below.
--anonymous-regex-trace
Trace the process of applying regular expressions specified with
the --anonymous-regex option. Use this option to find out why
your regular expressions don't do what you expected them to do.
--location-map ol=nl
Map the original schema location ol that is specified in the XML
Schema include or import elements to new schema location nl.
Repeat this option to map more than one schema location. For
example, the following option maps the http://exam‐
ple.com/foo.xsd URL to the foo.xsd local file.
--location-map http://example.com/foo.xsd=foo.xsd
--location-regex regex
Add regex to the list of regular expressions used to map schema
locations that are specified in the XML Schema include or import
elements. regex is a Perl-like regular expression in the form
/pattern/replacement/. Any character can be used as a delimiter
instead of /. Escaping of the delimiter character in pattern or
replacement is not supported. All the regular expressions are
pushed into a stack with the last specified expression consid‐
ered first. The first match that succeeds is used.
For example, the following expression maps URL locations in the
form http://example.com/foo/bar.xsd to local files in the form
bar.xsd:
%http://.+/(.+)%$1%
See also the REGEX AND SHELL QUOTING section below.
--location-regex-trace
Trace the process of applying regular expressions specified with
the --location-regex option. Use this option to find out why
your regular expressions don't do what you expected them to do.
--file-per-type
Generate a separate set of C++ files for each type defined in
XML Schema. Note that in this mode you only need to compile the
root schema(s) and the code will be generated for all included
and imported schemas. This compilation mode is primarily useful
when some of your schemas cannot be compiled separately or have
cyclic dependencies which involve type inheritance. Other
options related to this mode are: --type-file-regex, --schema-
file-regex, --fat-type-file, and --file-list.
--type-file-regex regex
Add regex to the list of regular expressions used to translate
type names to file names when the --file-per-type option is
specified. regex is a Perl-like regular expression in the form
/pattern/replacement/. Any character can be used as a delimiter
instead of /. Escaping of the delimiter character in pattern or
replacement is not supported. All the regular expressions are
pushed into a stack with the last specified expression consid‐
ered first. The first match that succeeds is used. Regular
expressions are applied to a string in the form
namespace type-name
For example, the following expression maps type foo that is
defined in the http://example.com/bar namespace to file name
bar-foo:
%http://example.com/(.+) (.+)%$1-$2%
See also the REGEX AND SHELL QUOTING section below.
--type-file-regex-trace
Trace the process of applying regular expressions specified with
the --type-file-regex option. Use this option to find out why
your regular expressions don't do what you expected them to do.
--schema-file-regex regex
Add regex to the list of regular expressions used to translate
schema file names when the --file-per-type option is specified.
regex is a Perl-like regular expression in the form /pat‐
tern/replacement/. Any character can be used as a delimiter
instead of /. Escaping of the delimiter character in pattern or
replacement is not supported. All the regular expressions are
pushed into a stack with the last specified expression consid‐
ered first. The first match that succeeds is used. Regular
Expressions are applied to the absolute filesystem path of a
schema file and the result, including the directory part, if
any, is used to derive the #include directive paths as well as
the generated C++ file paths. This option, along with --type-
file-regex are primarily useful to place the generated files
into subdirectories or to resolve file name conflicts.
For example, the following expression maps schema files in the
foo/1.0.0/ subdirectory to the files in the foo/ subdirectory.
As a result, the #include directive paths for such schemas will
be in the foo/schema.hxx form and the generated C++ files will
be placed into the foo/ subdirectory:
%.*/foo/1.0.0/(.+)%foo/$1%
See also the REGEX AND SHELL QUOTING section below.
--schema-file-regex-trace
Trace the process of applying regular expressions specified with
the --schema-file-regex option. Use this option to find out why
your regular expressions don't do what you expected them to do.
--fat-type-file
Generate code corresponding to global elements into type files
instead of schema files when the --type-file-regex option is
specified. This option is primarily useful when trying to mini‐
mize the amount of object code that is linked to an executable
by packaging compiled generated code into a static (archive)
library.
--file-list file
Write a list of generated C++ files to file. This option is pri‐
marily useful in the file-per-type compilation mode (--file-per-
type) to create a list of generated C++ files, for example, as a
makefile fragment.
--file-list-prologue text
Insert text at the beginning of the file list. As a convenience,
all occurrences of the \n character sequence in text are
replaced with new lines. This option can, for example, be used
to assign the generated file list to a makefile variable.
--file-list-epilogue text
Insert text at the end of the file list. As a convenience, all
occurrences of the \n character sequence in text are replaced
with new lines.
--file-list-delim text
Delimit file names written to the file list with text instead of
new lines. As a convenience, all occurrences of the \n character
sequence in text are replaced with new lines.
cxx-tree command options
--generate-polymorphic
Generate polymorphism-aware code. Specify this option if you use
substitution groups or xsi:type. Use the --polymorphic-type or
--polymorphic-type-all option to specify which type hierarchies
are polymorphic.
--polymorphic-type type
Indicate that type is a root of a polymorphic type hierarchy.
The compiler can often automatically determine which types are
polymorphic based on the substitution group declarations. How‐
ever, you may need to use this option if you are not using sub‐
stitution groups or if substitution groups are defined in
another schema. You need to specify this option when compiling
every schema file that references type. The type argument is an
XML Schema type name that can be optionally qualified with a
namespace in the namespace#name form.
--polymorphic-type-all
Indicate that all types should be treated as polymorphic.
--polymorphic-plate num
Specify the polymorphic map plate the generated code should reg‐
ister on. This functionality is primarily useful to segregate
multiple schemas that define the same polymorphic types.
--ordered-type type
Indicate that element order in type is significant. An example
would be a complex type with unbounded choice as a content model
where the element order in XML has application-specific seman‐
tics. For ordered types the compiler generates a special con‐
tainer data member and a corresponding set of accessors and mod‐
ifiers that are used to capture the order of elements and, for
mixed content, of text.
The type argument is an XML Schema type name that can be option‐
ally qualified with a namespace in the namespace#name form.
Note also that you will need to specify this option when compil‐
ing every schema file that has other ordered types derived from
this type.
--ordered-type-derived
Automatically treat types derived from ordered bases as also
ordered. This is primarily useful if you would like to be able
to iterate over the complete content using the content order
container.
--ordered-type-mixed
Automatically treat complex types with mixed content as ordered.
--ordered-type-all
Indicate that element order in all types is significant.
--order-container type
Specify a custom class template that should be used as a con‐
tainer for the content order in ordered types instead of the
default std::vector. See --ordered-type for more information on
ordered type. This option is primarily useful if you need to
perform more complex lookups in the content order container, for
example by element id. In this case, a container like Boost
multi-index may be more convenient. Note that if using a custom
container, you will also most likely need to include the rele‐
vant headers using the --hxx-prologue* options.
--generate-serialization
Generate serialization functions. Serialization functions con‐
vert the object model back to XML.
--generate-ostream
Generate ostream insertion operators (operator<<) for generated
types. This allows one to easily print a fragment or the whole
object model for debugging or logging.
--generate-doxygen
Generate documentation comments suitable for extraction by the
Doxygen documentation system. Documentation from annotations is
added to the comments if present in the schema.
--generate-comparison
Generate comparison operators (operator== and operator!=) for
complex types. Comparison is performed member-wise.
--generate-default-ctor
Generate default constructors even for types that have required
members. Required members of an instance constructed using such
a constructor are not initialized and accessing them results in
undefined behavior.
--generate-from-base-ctor
Generate constructors that expect an instance of a base type
followed by all required members.
--suppress-assignment
Suppress the generation of copy assignment operators for complex
types. If this option is specified, the copy assignment opera‐
tors for such types are declared private and left unimplemented.
--generate-detach
Generate detach functions for required elements and attributes.
Detach functions for optional and sequence cardinalities are
provided by the respective containers. These functions, for
example, allow you to move sub-trees in the object model either
within the same tree or between different trees.
--generate-wildcard
Generate accessors and modifiers as well as parsing and serial‐
ization code for XML Schema wildcards (any and anyAttribute).
XML content matched by wildcards is presented as DOM fragments.
Note that you need to initialize the Xerces-C++ runtime if you
are using this option.
--generate-any-type
Extract and store content of the XML Schema anyType type as a
DOM fragment. Note that you need to initialize the Xerces-C++
runtime if you are using this option.
--generate-insertion os
Generate data representation stream insertion operators for the
os output stream type. Repeat this option to specify more than
one stream type. The ACE CDR stream (ACE_OutputCDR) and RPC XDR
are recognized by the compiler and the necessary #include direc‐
tives are automatically generated. For custom stream types use
the --hxx-prologue* options to provide the necessary declara‐
tions.
--generate-extraction is
Generate data representation stream extraction constructors for
the is input stream type. Repeat this option to specify more
than one stream type. The ACE CDR stream (ACE_InputCDR) and RPC
XDR are recognized by the compiler and the necessary #include
directives are automatically generated. For custom stream types
use the --hxx-prologue* options to provide the necessary decla‐
rations.
--generate-forward
Generate a separate header file with forward declarations for
the types being generated.
--suppress-parsing
Suppress the generation of the parsing functions and construc‐
tors. Use this option to reduce the generated code size when
parsing from XML is not needed.
--generate-element-type
Generate types instead of parsing and serialization functions
for root elements. This is primarily useful to distinguish
object models with the same root type but with different root
elements.
--generate-element-map
Generate a root element map that allows uniform parsing and
serialization of multiple root elements. This option is only
valid together with --generate-element-type.
--generate-intellisense
Generate workarounds for IntelliSense bugs in Visual Studio 2005
(8.0). When this option is used, the resulting code is slightly
more verbose. IntelliSense in Visual Studio 2008 (9.0) and
later does not require these workarounds. Support for Intel‐
liSense in Visual Studio 2003 (7.1) is improved with this option
but is still incomplete.
--omit-default-attributes
Omit attributes with default and fixed values from serialized
XML documents.
--type-naming style
Specify the type naming convention that should be used in the
generated code. Valid styles are knr (default), ucc, and java.
See the NAMING CONVENTION section below for more information.
--function-naming style
Specify the function naming convention that should be used in
the generated code. Valid styles are knr (default), lcc, and
java. See the NAMING CONVENTION section below for more informa‐
tion.
--type-regex regex
Add regex to the list of regular expressions used to translate
XML Schema type names to C++ type names. See the NAMING CONVEN‐
TION section below for more information.
--accessor-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes to C++ accessor function
names. See the NAMING CONVENTION section below for more informa‐
tion.
--one-accessor-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes with cardinality one to
C++ accessor function names. See the NAMING CONVENTION section
below for more information.
--opt-accessor-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes with cardinality
optional to C++ accessor function names. See the NAMING CONVEN‐
TION section below for more information.
--seq-accessor-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes with cardinality
sequence to C++ accessor function names. See the NAMING CONVEN‐
TION section below for more information.
--modifier-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes to C++ modifier function
names. See the NAMING CONVENTION section below for more informa‐
tion.
--one-modifier-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes with cardinality one to
C++ modifier function names. See the NAMING CONVENTION section
below for more information.
--opt-modifier-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes with cardinality
optional to C++ modifier function names. See the NAMING CONVEN‐
TION section below for more information.
--seq-modifier-regex regex
Add regex to the list of regular expressions used to translate
XML Schema names of elements/attributes with cardinality
sequence to C++ modifier function names. See the NAMING CONVEN‐
TION section below for more information.
--parser-regex regex
Add regex to the list of regular expressions used to translate
XML Schema element names to C++ parsing function names. See the
NAMING CONVENTION section below for more information.
--serializer-regex regex
Add regex to the list of regular expressions used to translate
XML Schema element names to C++ serialization function names.
See the NAMING CONVENTION section below for more information.
--const-regex regex
Add regex to the list of regular expressions used to translate
XML Schema-derived names to C++ constant names. See the NAMING
CONVENTION section below for more information.
--enumerator-regex regex
Add regex to the list of regular expressions used to translate
XML Schema enumeration values to C++ enumerator names. See the
NAMING CONVENTION section below for more information.
--element-type-regex regex
Add regex to the list of regular expressions used to translate
XML Schema element names to C++ element type names. See the NAM‐
ING CONVENTION section below for more information.
--name-regex-trace
Trace the process of applying regular expressions specified with
the name transformation options. Use this option to find out why
your regular expressions don't do what you expected them to do.
--root-element-first
Treat only the first global element as a document root. By
default all global elements are considered document roots.
--root-element-last
Treat only the last global element as a document root. By
default all global elements are considered document roots.
--root-element-all
Treat all global elements as document roots. This is the default
behavior. By explicitly specifying this option you can suppress
the warning that is issued if more than one global element is
defined.
--root-element-none
Do not treat any global elements as document roots. By default
all global elements are considered document roots.
--root-element element
Treat only element as a document root. Repeat this option to
specify more than one root element.
--custom-type map
Use a custom C++ type instead of the generated class. The map
argument is in the form name[=type[/base]], where name is a type
name as defined in XML Schema and type is a C++ type name that
should be used instead. If type is not present or empty then the
custom type is assumed to have the same name and be defined in
the same namespace as the generated class would have. If base is
specified then the generated class is still generated but with
that name.
--custom-type-regex regex
Use custom C++ types instead of the generated classes. The regex
argument is in the form /name-pat/[type-sub/[base-sub/]], where
name-pat is a regex pattern that will be matched against type
names as defined in XML Schema and type-sub is a C++ type name
substitution that should be used instead. If type-sub is not
present or its substitution results in an empty string then the
custom type is assumed to have the same name and be defined in
the same namespace as the generated class would have. If base-
sub is present and its substitution results in a non-empty
string then the generated class is still generated but with the
result of this substitution as its name. The pattern and substi‐
tutions are in the Perl regular expression format. See also the
REGEX AND SHELL QUOTING section below.
--parts num
Split generated source code into num parts. This is useful when
translating large, monolithic schemas and a C++ compiler is not
able to compile the resulting source code at once (usually due
to insufficient memory).
--parts-suffix suffix
Use suffix instead of the default '-' to separate the file name
from the part number.
cxx-parser command options
--type-map mapfile
Read XML Schema to C++ type mapping information from mapfile.
Repeat this option to specify several type maps. Type maps are
considered in order of appearance and the first match is used.
By default all user-defined types are mapped to void. See the
TYPE MAP section below for more information.
--xml-parser parser
Use parser as the underlying XML parser. Valid values are xerces
for Xerces-C++ (default) and expat for Expat.
--generate-validation
Generate validation code. The validation code ("perfect parser")
ensures that instance documents conform to the schema. Valida‐
tion code is generated by default when the selected underlying
XML parser is non-validating (expat).
--suppress-validation
Suppress the generation of validation code. Validation is sup‐
pressed by default when the selected underlying XML parser is
validating (xerces).
--generate-polymorphic
Generate polymorphism-aware code. Specify this option if you use
substitution groups or xsi:type.
--generate-noop-impl
Generate a sample parser implementation that does nothing (no
operation). The sample implementation can then be filled with
the application-specific code. For an input file in the form
name.xsd this option triggers the generation of two additional
C++ files in the form: name-pimpl.hxx (parser implementation
header file) and name-pimpl.cxx (parser implementation source
file).
--generate-print-impl
Generate a sample parser implementation that prints the XML data
to STDOUT. For an input file in the form name.xsd this option
triggers the generation of two additional C++ files in the form:
name-pimpl.hxx (parser implementation header file) and name-
pimpl.cxx (parser implementation source file).
--generate-test-driver
Generate a test driver for the sample parser implementation. For
an input file in the form name.xsd this option triggers the gen‐
eration of an additional C++ file in the form name-driver.cxx.
--force-overwrite
Force overwriting of the existing implementation and test driver
files. Use this option only if you do not mind loosing the
changes you have made in the sample implementation or test
driver files.
--root-element-first
Indicate that the first global element is the document root.
This information is used to generate the test driver for the
sample implementation.
--root-element-last
Indicate that the last global element is the document root. This
information is used to generate the test driver for the sample
implementation.
--root-element element
Indicate that element is the document root. This information is
used to generate the test driver for the sample implementation.
--skel-type-suffix suffix
Use the provided suffix instead of the default _pskel to con‐
struct the names of the generated parser skeletons.
--skel-file-suffix suffix
Use the provided suffix instead of the default -pskel to con‐
struct the names of the generated parser skeleton files.
--impl-type-suffix suffix
Use the provided suffix instead of the default _pimpl to con‐
struct the names of the parser implementations for the built-in
XML Schema types as well as sample parser implementations.
--impl-file-suffix suffix
Use the provided suffix instead of the default -pimpl to con‐
struct the names of the generated sample parser implementation
files.
NAMING CONVENTION
The compiler can be instructed to use a particular naming convention in
the generated code. A number of widely-used conventions can be selected
using the --type-naming and --function-naming options. A custom naming
convention can be achieved using the --type-regex, --accessor-regex,
--one-accessor-regex, --opt-accessor-regex, --seq-accessor-regex,
--modifier-regex, --one-modifier-regex, --opt-modifier-regex, --seq-
modifier-regex, --parser-regex, --serializer-regex, --const-regex,
--enumerator-regex, and --element-type-regex options.
The --type-naming option specifies the convention that should be used
for naming C++ types. Possible values for this option are knr
(default), ucc, and java. The knr value (stands for K&R) signifies the
standard, lower-case naming convention with the underscore used as a
word delimiter, for example: foo, foo_bar. The ucc (stands for upper-
camel-case) and java values a synonyms for the same naming convention
where the first letter of each word in the name is capitalized, for
example: Foo, FooBar.
Similarly, the --function-naming option specifies the convention that
should be used for naming C++ functions. Possible values for this
option are knr (default), lcc, and java. The knr value (stands for
K&R) signifies the standard, lower-case naming convention with the
underscore used as a word delimiter, for example: foo(), foo_bar().
The lcc value (stands for lower-camel-case) signifies a naming conven‐
tion where the first letter of each word except the first is capital‐
ized, for example: foo(), fooBar(). The java naming convention is simi‐
lar to the lower-camel-case one except that accessor functions are pre‐
fixed with get, modifier functions are prefixed with set, parsing func‐
tions are prefixed with parse, and serialization functions are prefixed
with serialize, for example: getFoo(), setFooBar(), parseRoot(), seri‐
alizeRoot().
Note that the naming conventions specified with the --type-naming and
--function-naming options perform only limited transformations on the
names that come from the schema in the form of type, attribute, and
element names. In other words, to get consistent results, your schemas
should follow a similar naming convention as the one you would like to
have in the generated code. Alternatively, you can use the --*-regex
options (discussed below) to perform further transformations on the
names that come from the schema.
The --type-regex, --accessor-regex, --one-accessor-regex, --opt-acces‐
sor-regex, --seq-accessor-regex, --modifier-regex, --one-modifier-
regex, --opt-modifier-regex, --seq-modifier-regex, --parser-regex,
--serializer-regex, --const-regex, --enumerator-regex, and --element-
type-regex options allow you to specify extra regular expressions for
each name category in addition to the predefined set that is added
depending on the --type-naming and --function-naming options. Expres‐
sions that are provided with the --*-regex options are evaluated prior
to any predefined expressions. This allows you to selectively override
some or all of the predefined transformations. When debugging your own
expressions, it is often useful to see which expressions match which
names. The --name-regex-trace option allows you to trace the process of
applying regular expressions to names.
The value for the --*-regex options should be a perl-like regular
expression in the form /pattern/replacement/. Any character can be
used as a delimiter instead of /. Escaping of the delimiter character
in pattern or replacement is not supported. All the regular expressions
for each category are pushed into a category-specific stack with the
last specified expression considered first. The first match that suc‐
ceeds is used. For the --one-accessor-regex (accessors with cardinality
one), --opt-accessor-regex (accessors with cardinality optional), and
--seq-accessor-regex (accessors with cardinality sequence) categories
the --accessor-regex expressions are used as a fallback. For the --one-
modifier-regex, --opt-modifier-regex, and --seq-modifier-regex cate‐
gories the --modifier-regex expressions are used as a fallback. For the
--element-type-regex category the --type-regex expressions are used as
a fallback.
The type name expressions (--type-regex) are evaluated on the name
string that has the following format:
[namespace ]name[,name][,name][,name]
The element type name expressions (--element-type-regex), effective
only when the --generate-element-type option is specified, are evalu‐
ated on the name string that has the following format:
namespace name
In the type name format the namespace part followed by a space is only
present for global type names. For global types and elements defined in
schemas without a target namespace, the namespace part is empty but the
space is still present. In the type name format after the initial name
component, up to three additional name components can be present, sepa‐
rated by commas. For example:
http://example.com/hello type
foo
foo,iterator
foo,const,iterator
The following set of predefined regular expressions is used to trans‐
form type names when the upper-camel-case naming convention is
selected:
/(?:[^ ]* )?([^,]+)/\u$1/
/(?:[^ ]* )?([^,]+),([^,]+)/\u$1\u$2/
/(?:[^ ]* )?([^,]+),([^,]+),([^,]+)/\u$1\u$2\u$3/
/(?:[^ ]* )?([^,]+),([^,]+),([^,]+),([^,]+)/\u$1\u$2\u$3\u$4/
The accessor and modifier expressions (--*accessor-regex and --*modi‐
fier-regex) are evaluated on the name string that has the following
format:
name[,name][,name]
After the initial name component, up to two additional name components
can be present, separated by commas. For example:
foo
dom,document
foo,default,value
The following set of predefined regular expressions is used to trans‐
form accessor names when the java naming convention is selected:
/([^,]+)/get\u$1/
/([^,]+),([^,]+)/get\u$1\u$2/
/([^,]+),([^,]+),([^,]+)/get\u$1\u$2\u$3/
For the parser, serializer, and enumerator categories, the correspond‐
ing regular expressions are evaluated on local names of elements and on
enumeration values, respectively. For example, the following predefined
regular expression is used to transform parsing function names when the
java naming convention is selected:
/(.+)/parse\u$1/
The const category is used to create C++ constant names for the ele‐
ment/wildcard/text content ids in ordered types.
See also the REGEX AND SHELL QUOTING section below.
TYPE MAP
Type map files are used in C++/Parser to define a mapping between XML
Schema and C++ types. The compiler uses this information to determine
the return types of post_* functions in parser skeletons corresponding
to XML Schema types as well as argument types for callbacks correspond‐
ing to elements and attributes of these types.
The compiler has a set of predefined mapping rules that map built-in
XML Schema types to suitable C++ types (discussed below) and all other
types to void. By providing your own type maps you can override these
predefined rules. The format of the type map file is presented below:
namespace schema-namespace [ cxx-namespace ]
{
( include file-name; )*
([ type ] schema-type cxx-ret-type [ cxx-arg-type ]; )*
}
Both schema-namespace and schema-type are regex patterns while cxx-
namespace, cxx-ret-type, and cxx-arg-type are regex pattern substitu‐
tions. All names can be optionally enclosed in " ", for example, to
include white-spaces.
schema-namespace determines XML Schema namespace. Optional cxx-names‐
pace is prefixed to every C++ type name in this namespace declaration.
cxx-ret-type is a C++ type name that is used as a return type for the
post_* functions. Optional cxx-arg-type is an argument type for call‐
back functions corresponding to elements and attributes of this type.
If cxx-arg-type is not specified, it defaults to cxx-ret-type if cxx-
ret-type ends with * or & (that is, it is a pointer or a reference) and
const cxx-ret-type& otherwise. file-name is a file name either in the
" " or < > format and is added with the #include directive to the gen‐
erated code.
The # character starts a comment that ends with a new line or end of
file. To specify a name that contains # enclose it in " ". For example:
namespace http://www.example.com/xmlns/my my
{
include "my.hxx";
# Pass apples by value.
#
apple apple;
# Pass oranges as pointers.
#
orange orange_t*;
}
In the example above, for the http://www.example.com/xmlns/my#orange
XML Schema type, the my::orange_t* C++ type will be used as both return
and argument types.
Several namespace declarations can be specified in a single file. The
namespace declaration can also be completely omitted to map types in a
schema without a namespace. For instance:
include "my.hxx";
apple apple;
namespace http://www.example.com/xmlns/my
{
orange "const orange_t*";
}
The compiler has a number of predefined mapping rules that can be pre‐
sented as the following map files. The string-based XML Schema built-in
types are mapped to either std::string or std::wstring depending on the
character type selected with the --char-type option (char by default).
namespace http://www.w3.org/2001/XMLSchema
{
boolean bool bool;
byte "signed char" "signed char";
unsignedByte "unsigned char" "unsigned char";
short short short;
unsignedShort "unsigned short" "unsigned short";
int int int;
unsignedInt "unsigned int" "unsigned int";
long "long long" "long long";
unsignedLong "unsigned long long" "unsigned long long";
integer "long long" "long long";
negativeInteger "long long" "long long";
nonPositiveInteger "long long" "long long";
positiveInteger "unsigned long long" "unsigned long long";
nonNegativeInteger "unsigned long long" "unsigned long long";
float float float;
double double double;
decimal double double;
string std::string;
normalizedString std::string;
token std::string;
Name std::string;
NMTOKEN std::string;
NCName std::string;
ID std::string;
IDREF std::string;
language std::string;
anyURI std::string;
NMTOKENS xml_schema::string_sequence;
IDREFS xml_schema::string_sequence;
QName xml_schema::qname;
base64Binary std::auto_ptr<xml_schema::buffer>
std::auto_ptr<xml_schema::buffer>;
hexBinary std::auto_ptr<xml_schema::buffer>
std::auto_ptr<xml_schema::buffer>;
date xml_schema::date;
dateTime xml_schema::date_time;
duration xml_schema::duration;
gDay xml_schema::gday;
gMonth xml_schema::gmonth;
gMonthDay xml_schema::gmonth_day;
gYear xml_schema::gyear;
gYearMonth xml_schema::gyear_month;
time xml_schema::time;
}
The last predefined rule maps anything that wasn't mapped by previous
rules to void:
namespace .*
{
.* void void;
}
When you provide your own type maps with the --type-map option, they
are evaluated first. This allows you to selectively override predefined
rules.
REGEX AND SHELL QUOTING
When entering a regular expression argument in the shell command line
it is often necessary to use quoting (enclosing the argument in " " or
' ') in order to prevent the shell from interpreting certain charac‐
ters, for example, spaces as argument separators and $ as variable
expansions.
Unfortunately it is hard to achieve this in a manner that is portable
across POSIX shells, such as those found on GNU/Linux and UNIX, and
Windows shell. For example, if you use " " for quoting you will get a
wrong result with POSIX shells if your expression contains $. The stan‐
dard way of dealing with this on POSIX systems is to use ' ' instead.
Unfortunately, Windows shell does not remove ' ' from arguments when
they are passed to applications. As a result you may have to use ' '
for POSIX and " " for Windows ($ is not treated as a special character
on Windows).
Alternatively, you can save regular expression options into a file, one
option per line, and use this file with the --options-file option. With
this approach you don't need to worry about shell quoting.
DIAGNOSTICS
If the input file is not a valid W3C XML Schema definition, xsdcxx will
issue diagnostic messages to STDERR and exit with non-zero exit code.
BUGS
Send bug reports to the xsd-users@codesynthesis.com mailing list.
COPYRIGHT
Copyright (c) 2005-2014 Code Synthesis Tools CC.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, version 1.2;
with no Invariant Sections, no Front-Cover Texts and no Back-Cover
Texts. Copy of the license can be obtained from http://codesynthe‐
sis.com/licenses/fdl-1.2.txt
XSDCXX 4.0.0 July 2014 XSDCXX(1)