Net::LDAP::Constant(3)User Contributed Perl DocumentatioNet::LDAP::Constant(3)NAMENet::LDAP::Constant - Constants for use with Net::LDAP
SYNOPSIS
use Net::LDAP qw(LDAP_SUCCESS LDAP_PROTOCOL_ERROR);
DESCRIPTIONNet::LDAP::Constant exports constant subroutines for the following LDAP
error codes.
Protocol Constants
LDAP_SUCCESS s0(0)
Operation completed without error
LDAP_OPERATIONS_ERROR s0(1)
Server encountered an internal error
LDAP_PROTOCOL_ERROR s0(2)
Unrecognized version number or incorrect PDU structure
LDAP_TIMELIMIT_EXCEEDED s0(3)
The time limit on a search operation has been exceeded
LDAP_SIZELIMIT_EXCEEDED s0(4)
The maximum number of search results to return has been exceeded.
LDAP_COMPARE_FALSE s0(5)
This code is returned when a compare request completes and the
attribute value given is not in the entry specified
LDAP_COMPARE_TRUE s0(6)
This code is returned when a compare request completes and the
attribute value given is in the entry specified
LDAP_AUTH_METHOD_NOT_SUPPORTED s0(7)
Unrecognized SASL mechanism name
LDAP_STRONG_AUTH_NOT_SUPPORTED s0(7)
Unrecognized SASL mechanism name
LDAP_STRONG_AUTH_REQUIRED s0(8)
The server requires authentication be performed with a SASL
mechanism
LDAP_PARTIAL_RESULTS s0(9)
Returned to version 2 clients when a referral is returned. The
response will contain a list of URL's for other servers.
LDAP_REFERRAL (10)
The server is referring the client to another server. The response
will contain a list of URL's
LDAP_ADMIN_LIMIT_EXCEEDED (11)
The server has exceed the maximum number of entries to search while
gathering a list of search result candidates
LDAP_UNAVAILABLE_CRITICAL_EXT (12)
A control or matching rule specified in the request is not
supported by the server
LDAP_CONFIDENTIALITY_REQUIRED (13)
This result code is returned when confidentiality is required to
perform a given operation
LDAP_SASL_BIND_IN_PROGRESS (14)
The server requires the client to send a new bind request, with the
same SASL mechanism, to continue the authentication process
LDAP_NO_SUCH_ATTRIBUTE (16)
The request referenced an attribute that does not exist
LDAP_UNDEFINED_TYPE (17)
The request contains an undefined attribute type
LDAP_INAPPROPRIATE_MATCHING (18)
An extensible matching rule in the given filter does not apply to
the specified attribute
LDAP_CONSTRAINT_VIOLATION (19)
The request contains a value which does not meet with certain
constraints. This result can be returned as a consequence of
· The request was to add or modify a user password, and the
password fails to meet the criteria the server is configured to
check. This could be that the password is too short, or a
recognizable word (e.g. it matches one of the attributes in the
users entry) or it matches a previous password used by the same
user.
· The request is a bind request to a user account that has been
locked
LDAP_TYPE_OR_VALUE_EXISTS (20)
The request attempted to add an attribute type or value that
already exists
LDAP_INVALID_SYNTAX (21)
Some part of the request contained an invalid syntax. It could be a
search with an invalid filter or a request to modify the schema and
the given schema has a bad syntax.
LDAP_NO_SUCH_OBJECT (32)
The server cannot find an object specified in the request
LDAP_ALIAS_PROBLEM (33)
Server encountered a problem while attempting to dereference an
alias
LDAP_INVALID_DN_SYNTAX (34)
The request contained an invalid DN
LDAP_IS_LEAF (35)
The specified entry is a leaf entry
LDAP_ALIAS_DEREF_PROBLEM (36)
Server encountered a problem while attempting to dereference an
alias
LDAP_INAPPROPRIATE_AUTH (48)
The server requires the client which had attempted to bind
anonymously or without supplying credentials to provide some form
of credentials
LDAP_INVALID_CREDENTIALS (49)
The wrong password was supplied or the SASL credentials could not
be processed
LDAP_INSUFFICIENT_ACCESS (50)
The client does not have sufficient access to perform the requested
operation
LDAP_BUSY (51)
The server is too busy to perform requested operation
LDAP_UNAVAILABLE (52)
The server in unavailable to perform the request, or the server is
shutting down
LDAP_UNWILLING_TO_PERFORM (53)
The server is unwilling to perform the requested operation
LDAP_LOOP_DETECT (54)
The server was unable to perform the request due to an internal
loop detected
LDAP_SORT_CONTROL_MISSING (60)
The search contained a "virtual list view" control, but not a
server-side sorting control, which is required when a "virtual list
view" is given.
LDAP_INDEX_RANGE_ERROR (61)
The search contained a control for a "virtual list view" and the
results exceeded the range specified by the requested offsets.
LDAP_NAMING_VIOLATION (64)
The request violates the structure of the DIT
LDAP_OBJECT_CLASS_VIOLATION (65)
The request specifies a change to an existing entry or the addition
of a new entry that does not comply with the servers schema
LDAP_NOT_ALLOWED_ON_NONLEAF (66)
The requested operation is not allowed on an entry that has child
entries
LDAP_NOT_ALLOWED_ON_RDN (67)
The requested operation ill affect the RDN of the entry
LDAP_ALREADY_EXISTS (68)
The client attempted to add an entry that already exists. This can
occur as a result of
· An add request was submitted with a DN that already exists
· A modify DN requested was submitted, where the requested new DN
already exists
· The request is adding an attribute to the schema and an
attribute with the given OID or name already exists
LDAP_NO_OBJECT_CLASS_MODS (69)
Request attempt to modify the object class of an entry that should
not be modified
LDAP_RESULTS_TOO_LARGE (70)
The results of the request are to large
LDAP_AFFECTS_MULTIPLE_DSAS (71)
The requested operation needs to be performed on multiple servers
where the requested operation is not permitted
LDAP_VLV_ERROR (76)
A VLV error has occurred
LDAP_OTHER (80)
An unknown error has occurred
LDAP_SERVER_DOWN (81)
"Net::LDAP" cannot establish a connection or the connection has
been lost
LDAP_LOCAL_ERROR (82)
An error occurred in "Net::LDAP"
LDAP_ENCODING_ERROR (83)
"Net::LDAP" encountered an error while encoding the request packet
that would have been sent to the server
LDAP_DECODING_ERROR (84)
"Net::LDAP" encountered an error while decoding a response packet
from the server.
LDAP_TIMEOUT (85)
"Net::LDAP" timeout while waiting for a response from the server
LDAP_AUTH_UNKNOWN (86)
The method of authentication requested in a bind request is unknown
to the server
LDAP_FILTER_ERROR (87)
An error occurred while encoding the given search filter.
LDAP_USER_CANCELED (88)
The user canceled the operation
LDAP_PARAM_ERROR (89)
An invalid parameter was specified
LDAP_NO_MEMORY (90)
Out of memory error
LDAP_CONNECT_ERROR (91)
A connection to the server could not be established
LDAP_NOT_SUPPORTED (92)
An attempt has been made to use a feature not supported by
Net::LDAP
LDAP_CONTROL_NOT_FOUND (93)
The controls required to perform the requested operation were not
found.
LDAP_NO_RESULTS_RETURNED (94)
No results were returned from the server.
LDAP_MORE_RESULTS_TO_RETURN (95)
There are more results in the chain of results.
LDAP_CLIENT_LOOP (96)
A loop has been detected. For example when following referals.
LDAP_REFERRAL_LIMIT_EXCEEDED (97)
The referral hop limit has been exceeded.
LDAP_CANCELED (118)
Operation was canceled
LDAP_NO_SUCH_OPERATION (119)
Server has no knowledge of the operation requested for cancellation
LDAP_TOO_LATE (120)
Too late to cancel the outstanding operation
LDAP_CANNOT_CANCEL (121)
The identified operation does not support cancellation or the
cancel operation cannot be performed
LDAP_ASSERTION_FAILED (122)
An assertion control given in the LDAP operation evaluated to false
causing the operation to not be performed.
LDAP_SYNC_REFRESH_REQUIRED (4096)
Refresh Required.
Control OIDs
LDAP_CONTROL_SORTREQUEST (1.2.840.113556.1.4.473)
LDAP_CONTROL_SORTRESULT (1.2.840.113556.1.4.474)
LDAP_CONTROL_VLVREQUEST (2.16.840.1.113730.3.4.9)
LDAP_CONTROL_VLVRESPONSE (2.16.840.1.113730.3.4.10)
LDAP_CONTROL_PROXYAUTHORIZATION (2.16.840.1.113730.3.4.18)
LDAP_CONTROL_PROXYAUTHENTICATION (2.16.840.1.113730.3.4.18)
LDAP_CONTROL_PAGED (1.2.840.113556.1.4.319)
LDAP_CONTROL_TREE_DELETE (1.2.840.113556.1.4.805)
LDAP_CONTROL_MATCHEDVALS (1.2.826.0.1.3344810.2.2)
LDAP_CONTROL_MATCHEDVALUES (1.2.826.0.1.3344810.2.3)
LDAP_CONTROL_MANAGEDSAIT (2.16.840.1.113730.3.4.2)
LDAP_CONTROL_PERSISTENTSEARCH (2.16.840.1.113730.3.4.3)
LDAP_CONTROL_ENTRYCHANGE (2.16.840.1.113730.3.4.7)
LDAP_CONTROL_PWEXPIRED (2.16.840.1.113730.3.4.4)
LDAP_CONTROL_PWEXPIRING (2.16.840.1.113730.3.4.5)
LDAP_CONTROL_REFERRALS (1.2.840.113556.1.4.616)
LDAP_CONTROL_PASSWORDPOLICY (1.3.6.1.4.1.42.2.27.8.5.1)
LDAP_CONTROL_PERMISSIVEMODIFY (1.2.840.113556.1.4.1413)
LDAP_CONTROL_PREREAD (1.3.6.1.1.13.1)
LDAP_CONTROL_POSTREAD (1.3.6.1.1.13.2)
LDAP_CONTROL_ASSERTION (1.3.6.1.1.12)
LDAP_CONTROL_DONTUSECOPY (1.3.6.1.1.22)
LDAP_CONTROL_SYNC (1.3.6.1.4.1.4203.1.9.1.1)
LDAP_CONTROL_SYNC_STATE (1.3.6.1.4.1.4203.1.9.1.2)
LDAP_CONTROL_SYNC_DONE (1.3.6.1.4.1.4203.1.9.1.3)
LDAP_SYNC_INFO (1.3.6.1.4.1.4203.1.9.1.4)
Control constants
LDAP_PP_PASSWORD_EXPIRED s0(0) [LDAP_CONTROL_PASSWORDPOLICY]
The account's password has expired.
LDAP_PP_ACCOUNT_LOCKED s0(1) [LDAP_CONTROL_PASSWORDPOLICY]
The account is locked.
LDAP_PP_CHANGE_AFTER_RESET s0(2) [LDAP_CONTROL_PASSWORDPOLICY]
The account's password has been reset and now must be changed.
LDAP_PP_PASSWORD_MOD_NOT_ALLOWED s0(3) [LDAP_CONTROL_PASSWORDPOLICY]
The account's password may not be modified.
LDAP_PP_MUST_SUPPLY_OLD_PASSWORD s0(4) [LDAP_CONTROL_PASSWORDPOLICY]
The old password must also be supplied when setting a new password.
LDAP_PP_INSUFFICIENT_PASSWORD_QUALITY s0(5)
[LDAP_CONTROL_PASSWORDPOLICY]
The new password was not of sufficient quality.
LDAP_PP_PASSWORD_TOO_SHORT s0(6) [LDAP_CONTROL_PASSWORDPOLICY]
The new password was too short.
LDAP_PP_PASSWORD_TOO_YOUNG s0(7) [LDAP_CONTROL_PASSWORDPOLICY]
The previous password was changed too recently.
LDAP_PP_PASSWORD_IN_HISTORY s0(8) [LDAP_CONTROL_PASSWORDPOLICY]
The new password was used too recently.
LDAP_SYNC_NONE s0(0) [LDAP_CONTROL_SYNC]
LDAP_SYNC_REFRESH_ONLY s0(1) [LDAP_CONTROL_SYNC]
LDAP_SYNC_RESERVED s0(2) [LDAP_CONTROL_SYNC]
LDAP_SYNC_REFRESH_AND_PERSIST s0(3) [LDAP_CONTROL_SYNC]
LDAP_SYNC_REFRESH_PRESENTS s0(0) [LDAP_SYNC_INFO]
LDAP_SYNC_REFRESH_DELETES s0(1) [LDAP_SYNC_INFO]
LDAP_TAG_SYNC_NEW_COOKIE (0x80) [LDAP_SYNC_INFO]
LDAP_TAG_SYNC_REFRESH_DELETE (0xa1) [LDAP_SYNC_INFO]
LDAP_TAG_SYNC_REFRESH_PRESENT (0xa2) [LDAP_SYNC_INFO]
LDAP_TAG_SYNC_ID_SET (0xa3) [LDAP_SYNC_INFO]
LDAP_TAG_SYNC_COOKIE (0x04) [LDAP_SYNC_INFO]
LDAP_TAG_REFRESHDELETES (0x01) [LDAP_SYNC_INFO]
LDAP_TAG_REFRESHDONE (0x01) [LDAP_SYNC_INFO]
LDAP_TAG_RELOAD_HINT (0x01) [LDAP_CONTROL_SYNC]
LDAP_SYNC_PRESENT s0(0) [LDAP_CONTROL_SYNC_STATE]
LDAP_SYNC_ADD s0(1) [LDAP_CONTROL_SYNC_STATE]
LDAP_SYNC_MODIFY s0(2) [LDAP_CONTROL_SYNC_STATE]
LDAP_SYNC_DELETE s0(3) [LDAP_CONTROL_SYNC_STATE]
Extension OIDs
Net::LDAP::Constant exports constant subroutines for the following LDAP
extension OIDs.
LDAP_EXTENSION_START_TLS (1.3.6.1.4.1.1466.20037)
Indicates if the server supports the Start TLS extension (RFC 4513)
LDAP_EXTENSION_PASSWORD_MODIFY (1.3.6.1.4.1.4203.1.11.1)
Indicates that the server supports the Password Modify extension
(RFC 3062)
LDAP_EXTENSION_WHO_AM_I (1.3.6.1.4.1.4203.1.11.3)
Indicates that the server supports the "Who am I?" extension (RFC
4532)
LDAP_EXTENSION_REFRESH (1.3.6.1.4.1.1466.101.119.1)
Indicates that the server supports the Refresh extension (RFC 2589)
LDAP_EXTENSION_CANCEL (1.3.6.1.1.8)
Indicates the server supports the Cancel extension (RFC 3909)
Feature OIDs
Net::LDAP::Constant exports constant subroutines for the following LDAP
feature OIDs.
LDAP_FEATURE_ALL_OPATTS (1.3.6.1.4.1.4203.1.5.1)
Indicates if the server allows "+" for returning all operational
attributes (RFC 3673)
LDAP_FEATURE_OBJECTCLASS_ATTRS (1.3.6.1.4.1.4203.1.5.2)
Indicates that the server allows "@objectclass" for returning all
attributes used to represent a particular class of object (RFC
4529)
LDAP_FEATURE_ABSOLUTE_FILTERS (1.3.6.1.4.1.4203.1.5.3)
Indicates that the server supports "(&)" for the absolute True
filter, and "(|)" for the absolute False filter (RFC 4526).
LDAP_FEATURE_LANGUAGE_TAG_OPTIONS (1.3.6.1.4.1.4203.1.5.4)
Indicates the server supports language tag options of the form
"lang-language-tag" with attributes (RFC 3866)
LDAP_FEATURE_LANGUAGE_RANGE_OPTIONS (1.3.6.1.4.1.4203.1.5.5)
Indicates that the server supports language tag range options (RFC
3866)
LDAP_FEATURE_MODIFY_INCREMENT (1.3.6.1.1.14)
Indicates if the server supports the Modify Increment extension
(RFC 4525)
SEE ALSO
Net::LDAP, Net::LDAP::Message
AUTHOR
Graham Barr <gbarr@pobox.com>
Please report any bugs, or post any suggestions, to the perl-ldap
mailing list <perl-ldap@perl.org>
COPYRIGHT
Copyright (c) 1998-2009 Graham Barr. All rights reserved. This program
is free software; you can redistribute it and/or modify it under the
same terms as Perl itself.
perl v5.18.1 2013-10-18 Net::LDAP::Constant(3)
