actctrl man page on Mageia
[printable version]
ACTCTRL(8) Linux System Administration ACTCTRL(8)
NAME
actctrl - configure IBM Active 2000 ISDN adaptor
SYNOPSIS
actctrl [-d Driver-Id] action options ...
DESCRIPTION
actctrl is used to setup the IBM Active 2000 ISDN device driver and for
downloading the firmware into the ISDN card.
The use of actctrl makes sense, if you are using an IBM Active 2000
card only.
OPTIONS
-d Driver-Id
selects the S0 interface named by Driver-Id. Driver-Ids are
defined during driver initialisation. See act2000(4) for a
description of the syntax to be used for modularized and mono‐
lithic driver versions. This option must be used to identify
the S0 interface if more than one S0 interface is existent. If a
single IBM Active 2000 is used, it may be omitted. If using
more than one card, support for the other cards is enabled with
the add action of actctrl. Ids may not start with digits or
small x, because these values are misinterpreted as numeric
parameters by insmod. For loading the module, always the newest
modutils package should be used to avoid problems during load.
The following actions may be given to actctrl.
add [bus[ port[ irq[ id]]]]
enables support for an additional card in the driver. bus is is
an integer describing the bus-type of the card. Currently, the
only value which is allowed here is 1 meaning ISA-bus. In the
future, the values 2 (for MCA) and 3 (for PCMCIA) will be avail‐
able. port is either an integer describing the base port, or
the string auto which enables autoprobing. irq is either an
integer describing the IRQ to use, the string auto, which
enables grabbing of the next free IRQ or the string none which
enables polled mode for this card. id is an arbitrary string
for referencing the card at a later time.
dproto protocol [msn0,msn1, ... msn9]
selects the D-channel protocol and defines MSN's if using Euro
protocol. protocol may be either the string 1tr6 or the string
euro. If selecting Euro protocol, a comma-separated list of up
to 10 MSN's may be appended. For defining an empty entry in this
list, use a dash.
load firmware
downloads the firmware into the card and starts operation. Usu‐
ally the images are located in '/usr/share/isdn'. The firmware
is named bip1120.bpl.
dump is available if the program is configured using the --enable-
dump option only. The contents of internal driver variables is
dumped on stdout.
FILES
'/usr/share/isdn'/bip1120.bpl
This is the image of the firmware designed for both the German
1TR6 protocol and Euro ISDN.
BUGS
No bugs so far.
AUTHOR
© 1997 by Fritz Elfert <fritz@isdn4linux.de>
SEE ALSO
isdnctrl(8), act2000(4), isdnctrl(4), ttyI(4).
isdn4k-utils-3.12 1999/09/06 ACTCTRL(8)
[top]
List of man pages available for Mageia
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
Vote for polarhome
|