METASYS(8) NUT Manual METASYS(8)NAMEmetasys - Driver for Meta System UPS equipment
NOTE
This man page only documents the hardware-specific features of the
metasys driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
The metasys driver was written with the "Meta System UPS Protocol
Rev.1.12" kindly supplied from Meta System.
The driver should support all the common features of the ups models:
· HF Line (/2) 1-8 boards
· HF Millennium (810, 820)
· HF TOP Line (910, 920, 930, 940, 950, 970, 980)
· ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)
· ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)
· ally HF (800, 1000, 1250, 1600, 2000, 2500)
· Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
CABLING
The needed cable is a standard pin-to-pin serial cable with at least
pins 2, 3, and 5 (on DB9 connector) connected.
EXTRA ARGUMENTS
This driver supports no extra arguments from ups.conf(5).
BUGS
This driver has been tested on Meta System HF Millennium 820 and ally
HF 1000 only.
Any information about the use of the driver with the other listed UPS
are really welcome.
AUTHOR
Fabio Di Niro <blaxwan@users.sourceforge.net>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 08/07/2012 METASYS(8)