RANDOM(3)RANDOM(3)NAME
random, srandom, initstate, setstate - better random number generator;
routines for changing generators
SYNOPSIS
long random()srandom(seed)
int seed;
char *initstate(seed, state, n)
unsigned seed;
char *state;
int n;
char *setstate(state)
char *state;
DESCRIPTION
Random uses a non-linear additive feedback random number generator
employing a default table of size 31 long integers to return successive
pseudo-random numbers in the range from 0 to (2**31)−1. The period of
this random number generator is very large, approximately
16*((2**31)−1).
Random/srandom have (almost) the same calling sequence and
initialization properties as rand/srand. The difference is that
rand(3) produces a much less random sequence — in fact, the low dozen
bits generated by rand go through a cyclic pattern. All the bits
generated by random are usable. For example, ``random()&01'' will
produce a random binary value.
Unlike srand, srandom does not return the old seed; the reason for this
is that the amount of state information used is much more than a single
word. (Two other routines are provided to deal with
restarting/changing random number generators). Like rand(3), however,
random will by default produce a sequence of numbers that can be
duplicated by calling srandom with 1 as the seed.
The initstate routine allows a state array, passed in as an argument,
to be initialized for future use. The size of the state array (in
bytes) is used by initstate to decide how sophisticated a random number
generator it should use -- the more state, the better the random
numbers will be. (Current "optimal" values for the amount of state
information are 8, 32, 64, 128, and 256 bytes; other amounts will be
rounded down to the nearest known amount. Using less than 8 bytes will
cause an error). The seed for the initialization (which specifies a
starting point for the random number sequence, and provides for
restarting at the same point) is also an argument. Initstate returns a
pointer to the previous state information array.
Once a state has been initialized, the setstate routine provides for
rapid switching between states. Setstate returns a pointer to the
previous state array; its argument state array is used for further
random number generation until the next call to initstate or setstate.
Once a state array has been initialized, it may be restarted at a
different point either by calling initstate (with the desired seed, the
state array, and its size) or by calling both setstate (with the state
array) and srandom (with the desired seed). The advantage of calling
both setstate and srandom is that the size of the state array does not
have to be remembered after it is initialized.
With 256 bytes of state information, the period of the random number
generator is greater than 2**69 which should be sufficient for most
purposes.
AUTHOR
Earl T. Cohen
DIAGNOSTICS
If initstate is called with less than 8 bytes of state information, or
if setstate detects that the state information has been garbled, error
messages are printed on the standard error output.
SEE ALSOrand(3)BUGS
About 2/3 the speed of rand(3C).
4.2 Berkeley Distribution September 29, 1985 RANDOM(3)