XGetWindowProperty(3X11) X11R5 XGetWindowProperty(3X11)NAME
XGetWindowProperty, XListProperties, XChangeProperty, XRotateWindow‐
Properties, XDeleteProperty - obtain and change window properties
SYNTAX
int XGetWindowProperty(display, w, property, long_offset, long_length,
delete, req_type,
actual_type_return, actual_format_return,
nitems_return, bytes_after_return,
prop_return)
Display *display;
Window w;
Atom property;
long long_offset, long_length;
Bool delete;
Atom req_type;
Atom *actual_type_return;
int *actual_format_return;
unsigned long *nitems_return;
unsigned long *bytes_after_return;
unsigned char **prop_return;
Atom *XListProperties(display, w, num_prop_return)
Display *display;
Window w;
int *num_prop_return;
XChangeProperty(display, w, property, type, format, mode, data, nele‐
ments)
Display *display;
Window w;
Atom property, type;
int format;
int mode;
unsigned char *data;
int nelements;
XRotateWindowProperties(display, w, properties, num_prop, npositions)
Display *display;
Window w;
Atom properties[];
int num_prop;
int npositions;
XDeleteProperty(display, w, property)
Display *display;
Window w;
Atom property;
ARGUMENTS
actual_format_return
Returns the actual format of the property.
actual_type_return
Returns the atom identifier that defines the actual type of
the property.
bytes_after_return
Returns the number of bytes remaining to be read in the prop‐
erty if a partial read was performed.
data Specifies the property data.
delete Specifies a Boolean value that determines whether the prop‐
erty is deleted.
display Specifies the connection to the X server.
format Specifies whether the data should be viewed as a list of
8-bit, 16-bit, or 32-bit quantities. Possible values are 8,
16, and 32. This information allows the X server to cor‐
rectly perform byte-swap operations as necessary. If the
format is 16-bit or 32-bit, you must explicitly cast your
data pointer to an (unsigned char *) in the call to
long_length
Specifies the length in 32-bit multiples of the data to be
retrieved.
long_offset
Specifies the offset in the specified property (in 32-bit
quantities) where the data is to be retrieved.
mode Specifies the mode of the operation. You can pass or
nelements Specifies the number of elements of the specified data for‐
mat.
nitems_return
Returns the actual number of 8-bit, 16-bit, or 32-bit items
stored in the prop_return data.
num_prop Specifies the length of the properties array.
num_prop_return
Returns the length of the properties array.
npositions
Specifies the rotation amount.
prop_return
Returns the data in the specified format.
property Specifies the property name.
properties
Specifies the array of properties that are to be rotated.
req_type Specifies the atom identifier associated with the property
type or
type Specifies the type of the property. The X server does not
interpret the type but simply passes it back to an applica‐
tion that later calls
w Specifies the window whose property you want to obtain,
change, rotate or delete.
DESCRIPTION
The function returns the actual type of the property; the actual format
of the property; the number of 8-bit, 16-bit, or 32-bit items trans‐
ferred; the number of bytes remaining to be read in the property; and a
pointer to the data actually returned. sets the return arguments as
follows:
· If the specified property does not exist for the specified window,
returns to actual_type_return and the value zero to actual_for‐
mat_return and bytes_after_return. The nitems_return argument is
empty. In this case, the delete argument is ignored.
· If the specified property exists but its type does not match the
specified type, returns the actual property type to
actual_type_return, the actual property format (never zero) to
actual_format_return, and the property length in bytes (even if
the actual_format_return is 16 or 32) to bytes_after_return. It
also ignores the delete argument. The nitems_return argument is
empty.
· If the specified property exists and either you assign to the
req_type argument or the specified type matches the actual prop‐
erty type, returns the actual property type to actual_type_return
and the actual property format (never zero) to actual_for‐
mat_return. It also returns a value to bytes_after_return and
nitems_return, by defining the following values:
N = actual length of the stored property in bytes
(even if the format is 16 or 32)
I = 4 * long_offset
T = N - I
L = MINIMUM(T, 4 * long_length)
A = N - (I + L)
The returned value starts at byte index I in the property (index‐
ing from zero), and its length in bytes is L. If the value for
long_offset causes L to be negative, a error results. The value
of bytes_after_return is A, giving the number of trailing unread
bytes in the stored property.
always allocates one extra byte in prop_return (even if the property is
zero length) and sets it to ASCII null so that simple properties con‐
sisting of characters do not have to be copied into yet another string
before use. If delete is and bytes_after_return is zero, deletes the
property from the window and generates a event on the window.
The function returns if it executes successfully. To free the result‐
ing data, use
can generate and errors.
The function returns a pointer to an array of atom properties that are
defined for the specified window or returns NULL if no properties were
found. To free the memory allocated by this function, use
can generate a error.
The function alters the property for the specified window and causes
the X server to generate a event on that window. performs the follow‐
ing:
· If mode is discards the previous property value and stores the new
data.
· If mode is or inserts the specified data before the beginning of
the existing data or onto the end of the existing data, respec‐
tively. The type and format must match the existing property
value, or a error results. If the property is undefined, it is
treated as defined with the correct type and format with zero-
length data.
The lifetime of a property is not tied to the storing client. Proper‐
ties remain until explicitly deleted, until the window is destroyed, or
until the server resets. For a discussion of what happens when the
connection to the X server is closed, see section 2.6. The maximum
size of a property is server dependent and can vary dynamically depend‐
ing on the amount of memory the server has available. (If there is
insufficient space, a error results.)
can generate and errors.
The function allows you to rotate properties on a window and causes the
X server to generate events. If the property names in the properties
array are viewed as being numbered starting from zero and if there are
num_prop property names in the list, then the value associated with
property name I becomes the value associated with property name (I +
npositions) mod N for all I from zero to N - 1. The effect is to
rotate the states by npositions places around the virtual ring of prop‐
erty names (right for positive npositions, left for negative nposi‐
tions). If npositions mod N is nonzero, the X server generates a event
for each property in the order that they are listed in the array. If
an atom occurs more than once in the list or no property with that name
is defined for the window, a error results. If a or error results, no
properties are changed.
can generate and errors.
The function deletes the specified property only if the property was
defined on the specified window and causes the X server to generate a
event on the window unless the property does not exist.
can generate and errors.
DIAGNOSTICS
The server failed to allocate the requested resource or server memory.
A value for an Atom argument does not name a defined Atom.
Some numeric value falls outside the range of values accepted by the
request.
Unless a specific range is specified for an argument, the
full range defined by the argument's type is accepted. Any
argument defined as a set of alternatives can generate this
error.
A value for a Window argument does not name a defined Window.
SEE ALSOXFree(3X11), XInternAtom(3X11)
Xlib - C Language X Interface
XGetWindowProperty(3X11)