I2CDETECT(8)I2CDETECT(8)NAMEi2cdetect - detect I2C chips
SYNOPSISi2cdetect [-y] [-a] [-q|-r] i2cbus [first last]
i2cdetect-F i2cbus
i2cdetect-V
i2cdetect-l
DESCRIPTIONi2cdetect is a userspace program to scan an I2C bus for devices. It
outputs a table with the list of detected devices on the specified bus.
i2cbus indicates the number of the I2C bus to be scanned, and should
correspond to one of the busses listed by i2cdetect-l. The optional
parameters first and last restrict the scanning range (default: from
0x03 to 0x77).
i2cdetect can also be used to query the functionalities of an I2C bus
(see option -F.)
WARNING
This program can confuse your I2C bus, cause data loss and worse!
INTERPRETING THE OUTPUT
Each cell in the output table will contain one of the following sym‐
bols:
· "--". The address was probed but no chip answered.
· "UU". Probing was skipped, because this address is currently in use
by a driver. This strongly suggests that there is a chip at this
address.
· An address number in hexadecimal, e.g. "2d" or "4e". A chip was found
at this address.
OPTIONS-y Disable interactive mode. By default, i2cdetect will wait for a
confirmation from the user before messing with the I2C bus. When
this flag is used, it will perform the operation directly. This
is mainly meant to be used in scripts.
-a Force scanning of non-regular addresses. Not recommended.
-q Use SMBus "quick write" commands for probing (by default, the
command used is the one believed to be the safest for each
address). Not recommended. This is known to corrupt the Atmel
AT24RF08 EEPROM found on many IBM Thinkpad laptops.
-r Use SMBus "read byte" commands for probing (by default, the com‐
mand used is the one believed to be the safest for each
address). Not recommended. This is known to lock SMBus on vari‐
ous write-only chips (most notably clock chips at address 0x69).
-F Display the list of functionalities implemented by the adapter
and exit.
-V Display the version and exit.
-l Output a list of installed busses.
SEE ALSOi2cdump(8), sensors-detect(8)AUTHOR
Frodo Looijaard, Mark D. Studebaker, and the lm_sensors group
http://www.lm-sensors.org/ This manual page was written by Aurelien
Jarno <aurel32@debian.org>, for the Debian GNU/Linux system. It was
then reviewed by the lm_sensors team and is now part of the lm_sensors
source distribution.
October 2006 I2CDETECT(8)