MINIUPNPD(8)MINIUPNPD(8)NAMEminiupnpd - UPnP Internet Gateway Device Daemon
SYNOPSISminiupnpd [-f file] [-i interface] [-o address] [-a address] [-p port]
[-d] [-L] [-U] [-u uuid] [-s serial] [-m model_number] [-q queue] [-t
interval] [-P file] [-B down up] [-w url]
DESCRIPTIONminiupnpd act as a UPnP Internet Gateway Device. It is designed to run
on the gateway between the internet and a NAT'ed LAN. It provides an
interface, as defined in the UPnP standard, for enabling clients on the
LAN to ask for port redirections.
OPTIONS-f file
load the config from file. default is /etc/miniupnpd.conf.
-i interface
interface used to connect to the internet.
-o address
address used to connect to the internet. default address of the
interface will be used if not specified.
-a address
address on the LAN. -a option can by used multiple time if LAN
is subdivised in several subnetworks.
-p port
port used for HTTP.
-d debug mode : do not go to background, output messages on console
and do not filter out low priority messages.
-L set packet log in pf on
-q queue
set ALTQ queue in pf. filter rules must be enabled for this
option to have any effect.
-U report system uptime instead of daemon uptime to clients.
-u uuid
set the uuid of the UPnP Internet Gateway Device.
-s serial
serial number for the UPnP Internet Gateway Device.
-m number
model number for the UPnP Internet Gateway Device.
-t interval
SSDP notify interval in seconds : SSDP announce messages will be
broadcasted at this interval.
-P file
pid file. default is /var/run/miniupnpd.pid
-B down up
download and upload bitrates reported to clients.
-w url presentation url. default is first address on LAN, port 80.
SEE ALSOminissdpd(1)miniupnpc(3)BUGSMINIUPNPD(8)