OSPF_MONITOR(8) Cornell GatedDaemon Project OSPF_MONITOR(8)NAMEospf_monitor - monitor OSPF gateways
SYNOPSISospf_monitor mon_db_file
DESCRIPTION
Use the ospf_monitor command to query OSPF routers. The
ospf_monitor command operates in interactive mode. It
allows the user to query the various OSPF routers to pro-
vide detailed information on IO statistics, error logs,
link-state data bases, AS external data bases, the OSPF
routing table, configured OSPF interfaces, and OSPF neigh-
bors.
Mon_db_file is the complete pathname of a database com-
posed of records configuring destinations for ospf_monitor
remote commands. Each destination record is a single-line
entry which lists the destination IP address, the destina-
tion hostname, and an OSPF authentication key (if authen-
tication is activated by the destination). Since authen-
tication keys may be present in the destination records,
it is recommended that general access to this database be
restricted.
Refer to RFC-1583 (OSPF Specification, version 2) for
details about OSPF database and packet formats.
COMMANDS
Upon entering interactive mode, ospf_monitor presents the
of ospf_monitor's interactive commands. Interactive com-
mands can be interrupted at any time via a keyboard inter-
rupt. Note that the command line length must be less than
200 characters.
Local Commands
? Display all local commands and their functions.
?R Display all remote commands and their functions.
d Display all configured destinations. This com-
mand displays dest_index , the IP address, and
the hostname of all potential ospf_monitor com-
mand destinations configured in mon_db_file.
h Display the command history buffer showing the
last 30 interactive commands.
Release 3.5 1994/09/15 21:37:27 1
OSPF_MONITOR(8) Cornell GatedDaemon Project OSPF_MONITOR(8)
x Exit the ospf_monitor program.
@ remote_command
Send remote_command to the same (previous) des-
tination.
@dest_index remote_command
Send remote_command to configured destination
dest_index.
F filename
Send all ospf_monitor output to filename.
S Send all ospf_monitor output to stdout.
Remote Commands
a area_id type ls_id adv_rtr
Display link state advertisement. Area_id is the
OSPF area for which the query is directed.
adv_rtr is the router-id of the router which
originated this link state advertisement. Type
specifies the type of advertisement to request
and should be specified as follows:
1 Request the router links advertisements.
They describe the collected states of the
router's interfaces. For this type of
request, the ls_id field should be set to
the originating router's Router ID.
2 Request the network links advertisements.
They describe the set of routers attached
to the network. For this type of request,
the ls_id field should be set to the IP
interface address of the network's Desig-
nated Router.
3 Request the summary link advertisements
describing routes to networks. They
describe inter-area routes, and enable
the condensing of routing information at
area borders. For this type of request,
the ls_id field should be set to the
Release 3.5 1994/09/15 21:37:27 2
OSPF_MONITOR(8) Cornell GatedDaemon Project OSPF_MONITOR(8)
destination network's IP address.
4 Request the summary link advertisements
describing routes to AS boundary routers.
They describe inter-area routes, and
enable the condensing of routing informa-
tion at area borders. For this type of
request, the ls_id field should be set to
the Router ID of the described AS bound-
ary router.
5 Request the AS external link advertise-
ments. They describe routes to destina-
tions external to the Autonomous System.
For this type of request, the ls_id field
should be set to the destination net-
work's IP address.
c Display cumulative log. This log includes
input/output statistics for monitor request, hello,
data base description, link-state request, link-
state update, and link-state ack packets. Area
statistics are provided which describe the total
number of routing neighbors and number of active
OSPF interfaces. Routing table statistics are sum-
marized and reported as the number of intra-area
routes, inter-area routes, and AS external data
base entries.
e Display cumulative errors. This log reports the
various error conditions which can occur between
OSPF routing neighbors and shows the number of
occurrences for each.
h Displays the next hop list. This is a list of valid
next hops mostly derived from the SPF calculation.
l [ retrans ]
Display the link-state database (except for ASE's).
This table describes the routers and networks mak-
ing up the AS. If retrans is non-zero, the retrans-
mit list of neighbors held by this lsdb structure
will be printed.
Release 3.5 1994/09/15 21:37:27 3
OSPF_MONITOR(8) Cornell GatedDaemon Project OSPF_MONITOR(8)
A [ retrans ]
Display the AS external data base entries. This
table reports the advertising router, forwarding
address, age, length, sequence number, type, and
metric for each AS external route. If retrans is
non-zero, the retransmit list of neighbors held by
this lsdb structure will be printed.
o [ which ]
Display the OSPF routing table. This table reports
the AS border routes, area border routes, summary
AS border routes, networks, summary networks and AS
external networks currently managed via OSPF. If
which is omitted, all of the above will be listed.
If specified, the value of which (between 1 and 63)
specifies that only certain tables should be dis-
played. The appropriate value is determined by
adding up the values for the desired tables from
the following list:
1 Routes to AS border routers in this area.
2 Routes to area border routers for this area.
4 Summary routes to AS border routers in other
areas.
8 Routes to networks in this area.
16 Summary routes to networks in other areas.
32 AS routes to non-OSPF networks.
I Display all interfaces. This report shows all
interfaces configured for OSPF. Information
reported includes the area, interface IP address,
interface type, interface state, cost, priority,
and the IP address of the DR and BDR for the net-
work.
N Display all OSPF routing neighbors. Information
Release 3.5 1994/09/15 21:37:27 4
OSPF_MONITOR(8) Cornell GatedDaemon Project OSPF_MONITOR(8)
reported includes the area, local interface
address, router ID, neighbor IP address, state, and
mode.
V Display Gated version information.
AUTHORS
Rob Coltun <rcoltun@ni.umd.edu>
Jeffrey C Honig <jch@gated.cornell.edu>
SEE ALSO
gated (8), gdc (8), ripquery (8), routed (8),
GateD Documentation (file:///var/www/docs/gated/main.html)
GateD Configuration Guide
(file:///var/www/docs/gated/config_guide/config.html)
COPYRIGHT INFORMATION
This package and associated documentation is Copyright (c)
1990,1991,1992,1993,1994,1995 Cornell University., all
rights reserved. This software contains code that is
Copyright (c) 1988 Regents of the University of Califor-
nia., all rights reserved.;
This package contains code that is Copyright (c) 1989,
1990, 1991 The University of Maryland, College Park, Mary-
land., all rights reserved.
Release 3.5 1994/09/15 21:37:27 5