PADLOAD(1) BSD General Commands Manual PADLOAD(1)NAMEpadload — download tool for CrossPad
SYNOPSISpadload [-duvD] [-b baudrate] [-o filename] port
DESCRIPTIONpadload is an downloading tool for CrossPad portable digitizing notepad.
To use this program perform the following steps:
1. Connect your CrossPad to some of the serial port of your UNIX box.
Here we assume the port to be /dev/tty00.
2. Tap “menu” key on the CrossPad, and put “Upload ink” on LCD screen.
DO NOT tap “yes” yet.
3. Invoke padload with proper option.
4. Tap “yes” key on the CrossPad. Note that you must tap “yes” key
before padload timeouts (roughly 5 seconds).
5. Output should be generated into the specified file.
6. Follow the instruction on the LCD screen of CrossPad. It will ask
you if you would like to erase the ink data (vector data of the pen
trace) on the CrossPad, or you wish to keep the ink data.
The following options are available.
-d Enable data dump mode (basically for debugging). The data trans‐
mitted between the program and the camera will be shown. Trans‐
actions longer than 30 bytes will be truncated to fit the dump
list into 80 columns.
-i Do not overwrite existing files.
-u Do not perform uucp(1) locking. Only gulus are allowed to use
this option.
-v Be verbose.
-D Enable debugging mode.
-b baudrate
Specify baudrate to use. Default baudrate is 115200bps.
-o filename
Generate output to filename. If this option is not specified,
genearte output to /tmp/xxxxxxxx.cpd, where xxxxxxxx is deter‐
mined by the current time.
port The serial port to be used.
REFERENCEScrosspad2ps(1), uucp(1)BUGS-d option and -D option may break timing constraint of the protocol, as
CPU time will be chewed by tty output.
AUTHOR CONTACT
Jun-ichiro Itoh <itojun@itojun.org>
BSD May 13, 2024 BSD