Ppmshadow User Manual(0) Ppmshadow User Manual(0)NAMEppmshadow - add simulated shadows to a PPM image
SYNOPSISppmshadow [-b blur_size] [-k] [-t] [-x xoffset] [-y yoffset] [ppmfile]
DESCRIPTION
This program is part of Netpbm(1).
ppmshadow adds a simulated shadow to an image, giving the appearance
that the contents of the image float above the page, casting a diffuse
shadow on the background. Shadows can either be black, as cast by
opaque objects, or translucent, where the shadow takes on the color of
the object which casts it. You can specify the crispness of the shadow
and its displacement from the image with command line options.
ppmshadow sees your image as a foreground on a background. The back‐
ground color is whatever color the top left pixel of your image is.
The background is all the pixels that are that color and the foreground
is everything else. The shadow that ppmshadow generates is a shadow of
the foreground, cast on the background.
The shadow is the same size as the foreground, plus some fringes as
determined by the -b option. It is truncated to fit in your image.
The output image is the same dimensions as the input image.
You can use pamcomp to place a foreground image over a background
before running ppmshadow on it. You can use ppmmake to make the back‐
ground image (just an image of a solid color).
OPTIONS-b blur_size
Sets the distance of the light source from the image. Larger
values move the light source closer, casting a more diffuse
shadow, while smaller settings move the light further away,
yielding a sharper shadow. blur_size is the number of pixels of
fringe there is on the shadow, beyond where the shadow would be
if there were no blurring.
The default is 11 pixels.
Note that this option controls only the fringing effect of mov‐
ing the light source closer to the object. It does not make the
shadow grow or shrink as would happpen in the real world if you
moved a point light source closer to and further from an object.
-k Keep the intermediate temporary image files. When debugging,
these intermediate files provide many clues as to the source of
an error. See below ⟨#files⟩ for a list of the contents of
each file.
-t Consider the non-background material in the image translucent --
it casts shadows of its own color rather than a black shadow,
which is default. This often results in fuzzy, difficult-to-
read images but in some circumstances may look better.
-x xoffset
Specifies the displacement of the light source to the left of
the image. Larger settings of xoffset displace the shadow to
the right, as would be cast by a light further to the left. If
not specified, the horizontal offset is half of blur_size
(above), to the left.
-y yoffset
Specifies the displacement of the light source above the top of
the image. Larger settings displace the shadow downward, corre‐
sponding to moving the light further above the top of the image.
If you don't specify -y, the vertical offset defaults to the
same as the horizontal offset (above), upward.
FILES
Input is a PPM file named by the ppmfile command line argument; if you
don't specify ppmfile, the input is Standard Input.
The output is a PPM file, written to Standard Output.
ppmshadow creates a number of temporary files as it executes. It cre‐
ates a new directory for them, /tmp/ppmshadowpid, where pid is the
process ID of the ppmshadow process. If the TMPDIR environment vari‐
able is set, ppmshadow creates the directory there instead of /tmp.
In normal operation, ppmshadow deletes each temporary file as soon as
it is done with it and leaves no debris around after it completes. To
preserve the intermediate files for debugging, use the -k command line
option.
The temporary files are:
infile.ppm
A copy of the input.
bgmask.ppm
Positive binary mask
convkernel.ppm
Convolution kernel for blurring shadow
blurred.ppm
Blurred, colored shadow image
blurred2.ppm
Blurred shadow image before coloring
shadow.ppm
Clipped shadow image, offset as requested
background.ppm
Blank image with background of source image
shadow.ppm
Offset shadow
fgmask.ppm
Inverse mask file
justfg.ppm
Just the foreground. Rest is black. Original image times
inverse mask.
shadback.ppm
Generated shadow times positive mask
allbutfg.ppm
Everything but the foreground (foreground area is black).
LIMITATIONS
The source image must contain sufficient space on the edges in the
direction in which the shadow is cast to contain the shadow -- if it
doesn't some of the internal steps may fail. You can usually expand
the border of a too-tightly-cropped image with pnmmargin before pro‐
cessing it with ppmshadow.
Black pixels and pixels with the same color as the image background
don't cast a shadow. If this causes unintentional 'holes' in the
shadow, fill the offending areas with a color which differs from black
or the background by RGB values of 1, which will be imperceptible to
the viewer. Since the comparison is exact, the modified areas will now
cast shadows.
The background color of the source image (which is preserved in the
output) is deemed to be the color of the pixel at the top left of the
input image. If that pixel isn't part of the background, simply add a
one-pixel border at the top of the image, generate the shadow image,
then delete the border from it.
If something goes wrong along the way, the error messages from the var‐
ious Netpbm programs ppmshadow calls will, in general, provide little
or no clue as to where ppmshadow went astray. In this case, Specify
the -k option and examine the intermediate results in the temporary
files (which this option causes to be preserved). If you manually run
the commands that ppmshadow runs on these files, you can figure out
where the problem is. In problem cases where you want to manually
tweak the image generation process along the way, you can keep the
intermediate files with the -k option, modify them appropriately with
an image editor, then recombine them with the steps used by the code in
ppmshadow.
See the ppmshadow.doc file in the Netpbm source tree for additional
details and examples of the intermediate files and debugging ppmshadow.
Shadows are by default black, as cast by opaque material in the image
occluding white light. Use the -t option to simulate translucent mate‐
rial, where the shadow takes on the color of the object that casts it.
If the contrast between the image and background is insufficient, the
-t option may yield unattractive results which resemble simple blurring
of the original image.
Because Netpbm used to have a maximum maxval of 255, which meant that
the largest convolution kernel pnmconvol could use was 11 by 11,
ppmshadow includes a horrid, CPU-time-burning kludge which, if a blur
of greater than 11 is requested, performs an initial convolution with
an 11 x 11 kernel, then calls pnmsmooth (which is itself a program that
calls pnmconvol with a 3 x 3 kernel) as many times as the requested
blur exceeds 11. It's ugly, but it gets the job done on those rare
occasions where you need a blur greater than 11.
If you wish to generate an image at high resolution, then scale it to
publication size with pamscale in order to eliminate jagged edges by
resampling, it's best to generate the shadow in the original high reso‐
lution image, prior to scaling it down in size. If you scale first and
then add the shadow, you'll get an unsightly jagged stripe between the
edge of material and its shadow, due to resampled pixels intermediate
between the image and background obscuring the shadow.
EXIT STATUSppmshadow returns status 0 if processing was completed without errors,
and a nonzero Unix error code if an error prevented generation of out‐
put. Some errors may result in the script aborting, usually displaying
error messages from various Netpbm components it uses, without return‐
ing a nonzero error code. When this happens, the output file will be
empty, so be sure to test this if you need to know if the program suc‐
ceeded.
SEE ALSOpnm(1), pnmmargin(1), pnmconvol(1), pamscale(1), pnmsmooth(1), ppm(1)AUTHOR
John Walker http://www.fourmilab.ch ⟨http://www.fourmilab.ch⟩ August
8, 1997
COPYRIGHT
This software is in the public domain. Permission to use, copy, mod‐
ify, and distribute this software and its documentation for any purpose
and without fee is hereby granted, without any conditions or restric‐
tions.
netpbm documentation 17 April 2005 Ppmshadow User Manual(0)