RLATORLE(1) 1 (May 30, 1990) RLATORLE(1)
NAME
rlatorle - convert a Wavefront "rla" or "rlb" image file
into an RLE image file.
SYNOPSIS
rlatorle [ -b ] [ -h ] [ -v ] [ -m ] [ -o outfile ] [
infile.rla ]
DESCRIPTION
This program converts Wavefront image files (rla or rlb
formats) into Utah RLE(5) image files. Wavefront image
files store RGB data as well as a matte channel. They also
define a "bounding box" containing non-background pixels
which is in many cases smaller than the total image area.
Only this non-background area is run length encoded. When
converting to an RLE file, the matte channel is stored as an
alpha channel and the "bounding box" dimensions are ignored.
It is for this reason that in general the RLE version of the
file will be larger than its Wavefront counterpart.
The RLE file will contain a "true color" image (24 bits).
These RLE files may then be viewed using any RLE image
viewer. When they are displayed on an 8 bit display, the
image will be dithered. In order to produce a better
looking image (on 8 bit displays), it is recommended that
the image be quantizing (to 8 bit mapped color) prior to its
display. This may be done by piping the output of this
program into the Utah mcut(1) or rlequant(1) utilities. An
example of this is shown later.
OPTIONS
-b This option will cause rlatorle to convert from a
Wavefront "rlb" image rather than use the default "rla"
conversion.
-v This option will cause rlatorle to operate in verbose
mode. The header information is written to "stderr".
-h This option allows the header of the wavefront image to
be dumped to "stderr" without converting the file. It
is equivalent to using the -v option except that no
file conversion takes place.
-m This option will cause rlatorle to ignore the RGB data
and use the matte channel information to produce a
monochrome image. The resulting RLE image file will
contain only one color channel instead of the usual
four (RGB + alpha).
-o outfile
If specified, the output will be written to this file.
If outfile is "-", or if it is not specified, the
Page 1 (printed 12/1/98)
RLATORLE(1) 1 (May 30, 1990) RLATORLE(1)
output will be written to the standard output stream.
infile.rla
The name of the Wavefront image data file to be
converted. It is not necessary to supply the ".rla" or
".rlb" extension as it will be added to the supplied
name if not already there.
EXAMPLES
rlatorle-v test.0001.rla -o test.rle
While running in verbose mode, convert test.0001.rla to
RLE format and store resulting data in test.rle.
rlatorle test.0001.rla | mcut >test.rle
Convert test.0001.rla to RLE format and convert to 8
bit mapped color before storing data in test.rle
rlatorle-h test.0001.rla
Dump the header information of the Wavefront file
called test.0001.rla.
rlatorle-b test.0001 | get4d
Convert test.0001.rlb to RLE format and display the
resulting image.
SEE ALSO
mcut(1), rlequant(1), rletorla(1), urt(1), RLE(5).
AUTHOR
Wesley C. Barris
Army High Performance Computing Research Center (AHPCRC)
Minnesota Supercomputer Center, Inc.
Page 2 (printed 12/1/98)