wm(n) Tk (4.3) wm(n)
_________________________________________________________________
NAME
wm - Communicate with window manager
SYNOPSIS
wm option window ?args?
_________________________________________________________________
DESCRIPTION
The wm command is used to interact with window managers in
order to control such things as the title for a window, its
geometry, or the increments in terms of which it may be
resized. The wm command can take any of a number of
different forms, depending on the option argument. All of
the forms expect at least one additional argument, window,
which must be the path name of a top-level window.
The legal forms for the wm command are:
wm aspect window ?minNumer minDenom maxNumer maxDenom?
If minNumer, minDenom, maxNumer, and maxDenom are all
specified, then they will be passed to the window
manager and the window manager should use them to
enforce a range of acceptable aspect ratios for window.
The aspect ratio of window (width/length) will be
constrained to lie between minNumer/minDenom and
maxNumer/maxDenom. If minNumer etc. are all specified
as empty strings, then any existing aspect ratio
restrictions are removed. If minNumer etc. are
specified, then the command returns an empty string.
Otherwise, it returns a Tcl list containing four
elements, which are the current values of minNumer,
minDenom, maxNumer, and maxDenom (if no aspect
restrictions are in effect, then an empty string is
returned).
wm client window ?name?
If name is specified, this command stores name (which
should be the name of the host on which the application
is executing) in window's WM_CLIENT_MACHINE property
for use by the window manager or session manager. The
command returns an empty string in this case. If name
isn't specified, the command returns the last name set
in a wm client command for window. If name is
specified as an empty string, the command deletes the
WM_CLIENT_MACHINE property from window.
wm colormapwindows window ?windowList?
This command is used to manipulate the
WM_COLORMAP_WINDOWS property, which provides
Page 1 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
information to the window managers about windows that
have private colormaps. If windowList isn't specified,
the command returns a list whose elements are the names
of the windows in the WM_COLORMAP_WINDOWS property. If
windowList is specified, it consists of a list of
window path names; the command overwrites the
WM_COLORMAP_WINDOWS property with the given windows and
returns an empty string. The WM_COLORMAP_WINDOWS
property should normally contain a list of the internal
windows within window whose colormaps differ from their
parents. The order of the windows in the property
indicates a priority order: the window manager will
attempt to install as many colormaps as possible from
the head of this list when window gets the colormap
focus. If window is not included among the windows in
windowList, Tk implicitly adds it at the end of the
WM_COLORMAP_WINDOWS property, so that its colormap is
lowest in priority. If wm colormapwindows is not
invoked, Tk will automatically set the property for
each top-level window to all the internal windows whose
colormaps differ from their parents, followed by the
top-level itself; the order of the internal windows is
undefined. See the ICCCM documentation for more
information on the WM_COLORMAP_WINDOWS property.
wm command window ?value?
If value is specified, this command stores value in
window's WM_COMMAND property for use by the window
manager or session manager and returns an empty string.
Value must have proper list structure; the elements
should contain the words of the command used to invoke
the application. If value isn't specified then the
command returns the last value set in a wm command
command for window. If value is specified as an empty
string, the command deletes the WM_COMMAND property
from window.
wm deiconify window
Arrange for window to be displayed in normal (non-
iconified) form. This is done by mapping the window.
If the window has never been mapped then this command
will not map the window, but it will ensure that when
the window is first mapped it will be displayed in de-
iconified form. Returns an empty string.
wm focusmodel window ?active|passive?
If active or passive is supplied as an optional
argument to the command, then it specifies the focus
model for window. In this case the command returns an
empty string. If no additional argument is supplied,
then the command returns the current focus model for
window. An active focus model means that window will
Page 2 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
claim the input focus for itself or its descendants,
even at times when the focus is currently in some other
application. Passive means that window will never
claim the focus for itself: the window manager should
give the focus to window at appropriate times.
However, once the focus has been given to window or one
of its descendants, the application may re-assign the
focus among window's descendants. The focus model
defaults to passive, and Tk's focus command assumes a
passive model of focusing.
wm frame window
If window has been reparented by the window manager |
into a decorative frame, the command returns the |
platform specific window identifier for the outermost |
frame that contains window (the window whose parent is |
the root or virtual root). If window hasn't been |
reparented by the window manager then the command |
returns the platform specific window identifier for |
window.
wm geometry window ?newGeometry?
If newGeometry is specified, then the geometry of
window is changed and an empty string is returned.
Otherwise the current geometry for window is returned
(this is the most recent geometry specified either by
manual resizing or in a wm geometry command).
NewGeometry has the form =widthxheight_x_y, where any
of =, widthxheight, or _x_y may be omitted. Width and
height are positive integers specifying the desired
dimensions of window. If window is gridded (see
GRIDDED GEOMETRY MANAGEMENT below) then the dimensions
are specified in grid units; otherwise they are
specified in pixel units. X and y specify the desired
location of window on the screen, in pixels. If x is
preceded by +, it specifies the number of pixels
between the left edge of the screen and the left edge
of window's border; if preceded by - then x specifies
the number of pixels between the right edge of the
screen and the right edge of window's border. If y is
preceded by + then it specifies the number of pixels
between the top of the screen and the top of window's
border; if y is preceded by - then it specifies the
number of pixels between the bottom of window's border
and the bottom of the screen. If newGeometry is
specified as an empty string then any existing user-
specified geometry for window is cancelled, and the
window will revert to the size requested internally by
its widgets.
wm grid window ?baseWidth baseHeight widthInc heightInc?
This command indicates that window is to be managed as
Page 3 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
a gridded window. It also specifies the relationship
between grid units and pixel units. BaseWidth and
baseHeight specify the number of grid units
corresponding to the pixel dimensions requested
internally by window using Tk_GeometryRequest.
WidthInc and heightInc specify the number of pixels in
each horizontal and vertical grid unit. These four
values determine a range of acceptable sizes for
window, corresponding to grid-based widths and heights
that are non-negative integers. Tk will pass this
information to the window manager; during manual
resizing, the window manager will restrict the window's
size to one of these acceptable sizes. Furthermore,
during manual resizing the window manager will display
the window's current size in terms of grid units rather
than pixels. If baseWidth etc. are all specified as
empty strings, then window will no longer be managed as
a gridded window. If baseWidth etc. are specified then
the return value is an empty string. Otherwise the
return value is a Tcl list containing four elements
corresponding to the current baseWidth, baseHeight,
widthInc, and heightInc; if window is not currently
gridded, then an empty string is returned. Note: this
command should not be needed very often, since the
Tk_SetGrid library procedure and the setGrid option
provide easier access to the same functionality.
wm group window ?pathName?
If pathName is specified, it gives the path name for
the leader of a group of related windows. The window
manager may use this information, for example, to unmap
all of the windows in a group when the group's leader
is iconified. PathName may be specified as an empty
string to remove window from any group association. If
pathName is specified then the command returns an empty
string; otherwise it returns the path name of window's
current group leader, or an empty string if window
isn't part of any group.
wm iconbitmap window ?bitmap?
If bitmap is specified, then it names a bitmap in the
standard forms accepted by Tk (see the Tk_GetBitmap
manual entry for details). This bitmap is passed to
the window manager to be displayed in window's icon,
and the command returns an empty string. If an empty
string is specified for bitmap, then any current icon
bitmap is cancelled for window. If bitmap is specified
then the command returns an empty string. Otherwise it
returns the name of the current icon bitmap associated
with window, or an empty string if window has no icon
bitmap.
Page 4 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)wm iconify window
Arrange for window to be iconified. It window hasn't
yet been mapped for the first time, this command will
arrange for it to appear in the iconified state when it
is eventually mapped.
wm iconmask window ?bitmap?
If bitmap is specified, then it names a bitmap in the
standard forms accepted by Tk (see the Tk_GetBitmap
manual entry for details). This bitmap is passed to
the window manager to be used as a mask in conjunction
with the iconbitmap option: where the mask has zeroes
no icon will be displayed; where it has ones, the bits
from the icon bitmap will be displayed. If an empty
string is specified for bitmap then any current icon
mask is cancelled for window (this is equivalent to
specifying a bitmap of all ones). If bitmap is
specified then the command returns an empty string.
Otherwise it returns the name of the current icon mask
associated with window, or an empty string if no mask
is in effect.
wm iconname window ?newName?
If newName is specified, then it is passed to the
window manager; the window manager should display
newName inside the icon associated with window. In
this case an empty string is returned as result. If
newName isn't specified then the command returns the
current icon name for window, or an empty string if no
icon name has been specified (in this case the window
manager will normally display the window's title, as
specified with the wm title command).
wm iconposition window ?x y?
If x and y are specified, they are passed to the window
manager as a hint about where to position the icon for
window. In this case an empty string is returned. If
x and y are specified as empty strings then any
existing icon position hint is cancelled. If neither x
nor y is specified, then the command returns a Tcl list
containing two values, which are the current icon
position hints (if no hints are in effect then an empty
string is returned).
wm iconwindow window ?pathName?
If pathName is specified, it is the path name for a
window to use as icon for window: when window is
iconified then pathName will be mapped to serve as
icon, and when window is de-iconified then pathName
will be unmapped again. If pathName is specified as an
empty string then any existing icon window association
for window will be cancelled. If the pathName argument
Page 5 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
is specified then an empty string is returned.
Otherwise the command returns the path name of the
current icon window for window, or an empty string if
there is no icon window currently specified for window.
Button press events are disabled for window as long as
it is an icon window; this is needed in order to allow
window managers to ``own'' those events. Note: not all
window managers support the notion of an icon window.
wm maxsize window ?width height?
If width and height are specified, they give the
maximum permissible dimensions for window. For gridded
windows the dimensions are specified in grid units;
otherwise they are specified in pixel units. The
window manager will restrict the window's dimensions to
be less than or equal to width and height. If width
and height are specified, then the command returns an
empty string. Otherwise it returns a Tcl list with two
elements, which are the maximum width and height
currently in effect. The maximum size defaults to the
size of the screen. If resizing has been disabled with
the wm resizable command, then this command has no
effect. See the sections on geometry management below
for more information.
wm minsize window ?width height?
If width and height are specified, they give the
minimum permissible dimensions for window. For gridded
windows the dimensions are specified in grid units;
otherwise they are specified in pixel units. The
window manager will restrict the window's dimensions to
be greater than or equal to width and height. If width
and height are specified, then the command returns an
empty string. Otherwise it returns a Tcl list with two
elements, which are the minimum width and height
currently in effect. The minimum size defaults to one
pixel in each dimension. If resizing has been disabled
with the wm resizable command, then this command has no
effect. See the sections on geometry management below
for more information.
wm overrideredirect window ?boolean?
If boolean is specified, it must have a proper boolean
form and the override-redirect flag for window is set
to that value. If boolean is not specified then 1 or 0
is returned to indicate whether or not the override-
redirect flag is currently set for window. Setting the
override-redirect flag for a window causes it to be
ignored by the window manager; among other things,
this means that the window will not be reparented from
the root window into a decorative frame and the user
will not be able to manipulate the window using the
Page 6 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
normal window manager mechanisms.
wm positionfrom window ?who?
If who is specified, it must be either program or user,
or an abbreviation of one of these two. It indicates
whether window's current position was requested by the
program or by the user. Many window managers ignore
program-requested initial positions and ask the user to
manually position the window; if user is specified
then the window manager should position the window at
the given place without asking the user for assistance.
If who is specified as an empty string, then the
current position source is cancelled. If who is
specified, then the command returns an empty string.
Otherwise it returns user or window to indicate the
source of the window's current position, or an empty
string if no source has been specified yet. Most
window managers interpret ``no source'' as equivalent
to program. Tk will automatically set the position
source to user when a wm geometry command is invoked,
unless the source has been set explicitly to program.
wm protocol window ?name? ?command?
This command is used to manage window manager protocols
such as WM_DELETE_WINDOW. Name is the name of an atom
corresponding to a window manager protocol, such as
WM_DELETE_WINDOW or WM_SAVE_YOURSELF or WM_TAKE_FOCUS.
If both name and command are specified, then command is
associated with the protocol specified by name. Name
will be added to window's WM_PROTOCOLS property to tell
the window manager that the application has a protocol
handler for name, and command will be invoked in the
future whenever the window manager sends a message to
the client for that protocol. In this case the command
returns an empty string. If name is specified but
command isn't, then the current command for name is
returned, or an empty string if there is no handler
defined for name. If command is specified as an empty
string then the current handler for name is deleted and
it is removed from the WM_PROTOCOLS property on window;
an empty string is returned. Lastly, if neither name
nor command is specified, the command returns a list of
all the protocols for which handlers are currently
defined for window.
Tk always defines a protocol handler for
WM_DELETE_WINDOW, even if you haven't asked for one
with wm protocol. If a WM_DELETE_WINDOW message
arrives when you haven't defined a handler, then Tk
handles the message by destroying the window for which
it was received.
Page 7 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)wm resizable window ?width height?
This command controls whether or not the user may
interactively resize a top-level window. If width and
height are specified, they are boolean values that
determine whether the width and height of window may be
modified by the user. In this case the command returns
an empty string. If width and height are omitted then
the command returns a list with two 0/1 elements that
indicate whether the width and height of window are
currently resizable. By default, windows are resizable
in both dimensions. If resizing is disabled, then the
window's size will be the size from the most recent
interactive resize or wm geometry command. If there
has been no such operation then the window's natural
size will be used.
wm sizefrom window ?who?
If who is specified, it must be either program or user,
or an abbreviation of one of these two. It indicates
whether window's current size was requested by the
program or by the user. Some window managers ignore
program-requested sizes and ask the user to manually
size the window; if user is specified then the window
manager should give the window its specified size
without asking the user for assistance. If who is
specified as an empty string, then the current size
source is cancelled. If who is specified, then the
command returns an empty string. Otherwise it returns
user or window to indicate the source of the window's
current size, or an empty string if no source has been
specified yet. Most window managers interpret ``no
source'' as equivalent to program.
wm state window
Returns the current state of window: either normal,
iconic, withdrawn, or icon. The difference between
iconic and icon is that iconic refers to a window that
has been iconified (e.g., with the wm iconify command)
while icon refers to a window whose only purpose is to
serve as the icon for some other window (via the wm
iconwindow command).
wm title window ?string?
If string is specified, then it will be passed to the
window manager for use as the title for window (the
window manager should display this string in window's
title bar). In this case the command returns an empty
string. If string isn't specified then the command
returns the current title for the window. The title
for a window defaults to its name.
wm transient window ?master?
Page 8 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
If master is specified, then the window manager is
informed that window is a transient window (e.g. pull-
down menu) working on behalf of master (where master is
the path name for a top-level window). Some window
managers will use this information to manage window
specially. If master is specified as an empty string
then window is marked as not being a transient window
any more. If master is specified, then the command
returns an empty string. Otherwise the command returns
the path name of window's current master, or an empty
string if window isn't currently a transient window.
wm withdraw window
Arranges for window to be withdrawn from the screen.
This causes the window to be unmapped and forgotten
about by the window manager. If the window has never
been mapped, then this command causes the window to be
mapped in the withdrawn state. Not all window managers
appear to know how to handle windows that are mapped in
the withdrawn state. Note: it sometimes seems to be
necessary to withdraw a window and then re-map it (e.g.
with wm deiconify) to get some window managers to pay
attention to changes in window attributes such as
group.
GEOMETRY MANAGEMENT
By default a top-level window appears on the screen in its
natural size, which is the one determined internally by its
widgets and geometry managers. If the natural size of a
top-level window changes, then the window's size changes to
match. A top-level window can be given a size other than
its natural size in two ways. First, the user can resize
the window manually using the facilities of the window
manager, such as resize handles. Second, the application
can request a particular size for a top-level window using
the wm geometry command. These two cases are handled
identically by Tk; in either case, the requested size
overrides the natural size. You can return the window to
its natural by invoking wm geometry with an empty geometry
string.
Normally a top-level window can have any size from one pixel
in each dimension up to the size of its screen. However,
you can use the wm minsize and wm maxsize commands to limit
the range of allowable sizes. The range set by wm minsize
and wm maxsize applies to all forms of resizing, including
the window's natural size as well as manual resizes and the
wm geometry command. You can also use the command wm
resizable to completely disable interactive resizing in one
or both dimensions.
Page 9 (printed 2/26/99)
wm(n) Tk (4.3) wm(n)
GRIDDED GEOMETRY MANAGEMENT
Gridded geometry management occurs when one of the widgets
of an application supports a range of useful sizes. This
occurs, for example, in a text editor where the scrollbars,
menus, and other adornments are fixed in size but the edit
widget can support any number of lines of text or characters
per line. In this case, it is usually desirable to let the
user specify the number of lines or characters-per-line,
either with the wm geometry command or by interactively
resizing the window. In the case of text, and in other
interesting cases also, only discrete sizes of the window
make sense, such as integral numbers of lines and
characters-per-line; arbitrary pixel sizes are not useful.
Gridded geometry management provides support for this kind
of application. Tk (and the window manager) assume that
there is a grid of some sort within the application and that
the application should be resized in terms of grid units
rather than pixels. Gridded geometry management is
typically invoked by turning on the setGrid option for a
widget; it can also be invoked with the wm grid command or
by calling Tk_SetGrid. In each of these approaches the
particular widget (or sometimes code in the application as a
whole) specifies the relationship between integral grid
sizes for the window and pixel sizes. To return to non-
gridded geometry management, invoke wm grid with empty
argument strings.
When gridded geometry management is enabled then all the
dimensions specified in wm minsize, wm maxsize, and wm
geometry commands are treated as grid units rather than
pixel units. Interactive resizing is also carried out in
even numbers of grid units rather than pixels.
BUGS
Most existing window managers appear to have bugs that
affect the operation of the wm command. For example, some
changes won't take effect if the window is already active:
the window will have to be withdrawn and de-iconified in
order to make the change happen.
KEYWORDS
aspect ratio, deiconify, focus model, geometry, grid, group,
icon, iconify, increments, position, size, title, top-level
window, units, window manager
Page 10 (printed 2/26/99)