cupsd_selinux(8) SELinux Policy cupsd cupsd_selinux(8)NAMEcupsd_selinux - Security Enhanced Linux Policy for the cupsd processes
DESCRIPTION
Security-Enhanced Linux secures the cupsd processes via flexible manda‐
tory access control.
The cupsd processes execute with the cupsd_t SELinux type. You can
check if you have these processes running by executing the ps command
with the -Z qualifier.
For example:
ps -eZ | grep cupsd_t
ENTRYPOINTS
The cupsd_t SELinux type can be entered via the cupsd_exec_t file type.
The default entrypoint paths for the cupsd_t domain are the following:
/usr/sbin/hp-[^/]+, /usr/share/hplip/.*.py, /usr/lib/cups/backend/hp.*,
/usr/bin/hpijs, /usr/sbin/cupsd, /usr/sbin/hpiod, /usr/sbin/cups-
browsed
PROCESS TYPES
SELinux defines process types (domains) for each process running on the
system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux
cupsd policy is very flexible allowing users to setup their cupsd pro‐
cesses in as secure a method as possible.
The following process types are defined for cupsd:
cupsd_t, cupsd_config_t, cupsd_lpd_t, cups_pdf_t
Note: semanage permissive -a cupsd_t can be used to make the process
type cupsd_t permissive. SELinux does not deny access to permissive
process types, but the AVC (SELinux denials) messages are still gener‐
ated.
BOOLEANS
SELinux policy is customizable based on least access required. cupsd
policy is extremely flexible and has several booleans that allow you to
manipulate the policy and run cupsd with the tightest access possible.
If you want to allow users to resolve user passwd entries directly from
ldap rather then using a sssd server, you must turn on the authlo‐
gin_nsswitch_use_ldap boolean. Disabled by default.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow all daemons to write corefiles to /, you must turn
on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the
daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on
the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals,
you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other
processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors,
you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you
must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn
on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn
on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to allow confined applications to run with kerberos, you
must turn on the kerberos_enabled boolean. Enabled by default.
setsebool -P kerberos_enabled 1
If you want to allow system to run with NIS, you must turn on the
nis_enabled boolean. Disabled by default.
setsebool -P nis_enabled 1
If you want to allow confined applications to use nscd shared memory,
you must turn on the nscd_use_shm boolean. Disabled by default.
setsebool -P nscd_use_shm 1
NSSWITCH DOMAIN
If you want to allow users to resolve user passwd entries directly from
ldap rather then using a sssd server for the cups_pdf_t, cupsd_con‐
fig_t, cupsd_lpd_t, cupsd_t, you must turn on the authlogin_nss‐
witch_use_ldap boolean.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow confined applications to run with kerberos for the
cups_pdf_t, cupsd_config_t, cupsd_lpd_t, cupsd_t, you must turn on the
kerberos_enabled boolean.
setsebool -P kerberos_enabled 1
MANAGED FILES
The SELinux process type cupsd_t can manage files labeled with the fol‐
lowing file types. The paths listed are the default paths for these
file types. Note the processes UID still need to have DAC permissions.
anon_inodefs_t
cluster_conf_t
/etc/cluster(/.*)?
cluster_var_lib_t
/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t
/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/cpglockd.pid
/var/run/corosync.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
cupsd_interface_t
/etc/cups/interfaces(/.*)?
cupsd_lock_t
cupsd_log_t
/var/log/hp(/.*)?
/var/log/cups(/.*)?
/usr/Brother/fax/.*.log.*
/var/log/turboprint.*
cupsd_rw_etc_t
/etc/printcap.*
/etc/cups/ppd(/.*)?
/usr/Brother/(.*/)?inf(/.*)?
/usr/Printer/(.*/)?inf(/.*)?
/usr/lib/bjlib(/.*)?
/var/lib/iscan(/.*)?
/var/cache/cups(/.*)?
/etc/cups/certs/.*
/etc/opt/Brother/(.*/)?inf(/.*)?
/etc/cups/lpoptions.*
/var/cache/foomatic(/.*)?
/etc/cups/cupsd.conf.*
/var/lib/cups/certs/.*
/opt/gutenprint/ppds(/.*)?
/opt/brother/Printers(.*/)?inf(/.*)?
/etc/cups/classes.conf.*
/etc/cups/printers.conf.*
/etc/cups/subscriptions.*
/etc/opt/brother/Printers/(.*/)?inf(/.*)?
/usr/local/linuxprinter/ppd(/.*)?
/var/cache/alchemist/printconf.*
/etc/alchemist/namespace/printconf(/.*)?
/etc/cups/certs
/etc/cups/ppds.dat
/var/lib/cups/certs
/usr/share/foomatic/db/oldprinterids
cupsd_tmp_t
cupsd_var_lib_t
/var/lib/hp(/.*)?
cupsd_var_run_t
/var/ccpd(/.*)?
/var/ekpd(/.*)?
/var/run/hp.*.pid
/var/run/hp.*.port
/var/run/cups(/.*)?
/var/run/hplip(/.*)
/var/turboprint(/.*)?
faillog_t
/var/log/btmp.*
/var/log/faillog.*
/var/log/tallylog.*
/var/run/faillock(/.*)?
krb5_host_rcache_t
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0
print_spool_t
/var/spool/lpd(/.*)?
/var/spool/cups(/.*)?
/var/spool/cups-pdf(/.*)?
root_t
/
/initrd
samba_var_t
/var/nmbd(/.*)?
/var/lib/samba(/.*)?
/var/cache/samba(/.*)?
/var/spool/samba(/.*)?
security_t
/selinux
usbfs_t
FILE CONTEXTS
SELinux requires files to have an extended attribute to define the file
type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files.
SELinux cupsd policy is very flexible allowing users to setup their
cupsd processes in as secure a method as possible.
STANDARD FILE CONTEXT
SELinux defines the file context types for the cupsd, if you wanted to
store files with these types in a diffent paths, you need to execute
the semanage command to sepecify alternate labeling and then use
restorecon to put the labels on disk.
semanage fcontext -a -t cupsd_config_exec_t '/srv/cupsd/content(/.*)?'
restorecon -R -v /srv/mycupsd_content
Note: SELinux often uses regular expressions to specify labels that
match multiple files.
The following file types are defined for cupsd:
cupsd_config_exec_t
- Set files with the cupsd_config_exec_t type, if you want to transi‐
tion an executable to the cupsd_config_t domain.
Paths:
/usr/sbin/hal_lpadmin, /usr/libexec/hal_lpadmin, /usr/bin/cups-
config-daemon, /usr/sbin/printconf-backend, /usr/lib/udev/udev-
configure-printer, /usr/libexec/cups-pk-helper-mechanism
cupsd_config_var_run_t
- Set files with the cupsd_config_var_run_t type, if you want to store
the cupsd config files under the /run or /var/run directory.
cupsd_etc_t
- Set files with the cupsd_etc_t type, if you want to store cupsd files
in the /etc directories.
Paths:
/etc/hp(/.*)?, /etc/cups(/.*)?, /usr/share/cups(/.*)?
cupsd_exec_t
- Set files with the cupsd_exec_t type, if you want to transition an
executable to the cupsd_t domain.
Paths:
/usr/sbin/hp-[^/]+, /usr/share/hplip/.*.py, /usr/lib/cups/back‐
end/hp.*, /usr/bin/hpijs, /usr/sbin/cupsd, /usr/sbin/hpiod,
/usr/sbin/cups-browsed
cupsd_initrc_exec_t
- Set files with the cupsd_initrc_exec_t type, if you want to transi‐
tion an executable to the cupsd_initrc_t domain.
cupsd_interface_t
- Set files with the cupsd_interface_t type, if you want to treat the
files as cupsd interface data.
cupsd_lock_t
- Set files with the cupsd_lock_t type, if you want to treat the files
as cupsd lock data, stored under the /var/lock directory
cupsd_log_t
- Set files with the cupsd_log_t type, if you want to treat the data as
cupsd log data, usually stored under the /var/log directory.
Paths:
/var/log/hp(/.*)?, /var/log/cups(/.*)?, /usr/Brother/fax/.*.log.*,
/var/log/turboprint.*
cupsd_lpd_exec_t
- Set files with the cupsd_lpd_exec_t type, if you want to transition
an executable to the cupsd_lpd_t domain.
cupsd_lpd_tmp_t
- Set files with the cupsd_lpd_tmp_t type, if you want to store cupsd
lpd temporary files in the /tmp directories.
cupsd_lpd_var_run_t
- Set files with the cupsd_lpd_var_run_t type, if you want to store the
cupsd lpd files under the /run or /var/run directory.
cupsd_rw_etc_t
- Set files with the cupsd_rw_etc_t type, if you want to store cupsd rw
files in the /etc directories.
Paths:
/etc/printcap.*, /etc/cups/ppd(/.*)?,
/usr/Brother/(.*/)?inf(/.*)?, /usr/Printer/(.*/)?inf(/.*)?,
/usr/lib/bjlib(/.*)?, /var/lib/iscan(/.*)?, /var/cache/cups(/.*)?,
/etc/cups/certs/.*, /etc/opt/Brother/(.*/)?inf(/.*)?,
/etc/cups/lpoptions.*, /var/cache/foomatic(/.*)?,
/etc/cups/cupsd.conf.*, /var/lib/cups/certs/.*, /opt/guten‐
print/ppds(/.*)?, /opt/brother/Printers(.*/)?inf(/.*)?,
/etc/cups/classes.conf.*, /etc/cups/printers.conf.*,
/etc/cups/subscriptions.*, /etc/opt/brother/Print‐
ers/(.*/)?inf(/.*)?, /usr/local/linuxprinter/ppd(/.*)?,
/var/cache/alchemist/printconf.*, /etc/alchemist/namespace/print‐
conf(/.*)?, /etc/cups/certs, /etc/cups/ppds.dat,
/var/lib/cups/certs, /usr/share/foomatic/db/oldprinterids
cupsd_tmp_t
- Set files with the cupsd_tmp_t type, if you want to store cupsd tem‐
porary files in the /tmp directories.
cupsd_unit_file_t
- Set files with the cupsd_unit_file_t type, if you want to treat the
files as cupsd unit content.
cupsd_var_lib_t
- Set files with the cupsd_var_lib_t type, if you want to store the
cupsd files under the /var/lib directory.
cupsd_var_run_t
- Set files with the cupsd_var_run_t type, if you want to store the
cupsd files under the /run or /var/run directory.
Paths:
/var/ccpd(/.*)?, /var/ekpd(/.*)?, /var/run/hp.*.pid,
/var/run/hp.*.port, /var/run/cups(/.*)?, /var/run/hplip(/.*),
/var/turboprint(/.*)?
Note: File context can be temporarily modified with the chcon command.
If you want to permanently change the file context you need to use the
semanage fcontext command. This will modify the SELinux labeling data‐
base. You will need to use restorecon to apply the labels.
COMMANDS
semanage fcontext can also be used to manipulate default file context
mappings.
semanage permissive can also be used to manipulate whether or not a
process type is permissive.
semanage module can also be used to enable/disable/install/remove pol‐
icy modules.
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol‐
icy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSOselinux(8), cupsd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8)
, setsebool(8), cups_pdf_selinux(8), cupsd_config_selinux(8),
cupsd_lpd_selinux(8)cupsd 13-11-20 cupsd_selinux(8)