sane-nec(5) SANE Scanner Access Now Easy sane-nec(5)NAMEsane-nec - SANE backend for NEC scanners
DESCRIPTION
The sane-nec library implements a SANE (Scanner Access Now
Easy) backend that provides access to NEC SCSI scanners.
This backend should be considered alpha-quality software!
In the current state it is known to work with PC-IN500/4C
scanners. Another MultiReader scanner series is not sup-
ported. PC-IN 500/4C and MultiReader scanner are only sold
in Japan.(except Multi Reader PetiScan.)
For other scanners, it may or may not work.
The backend has the following known problems:
- ColorLineart mode is not supported.
- device name is fixed to /dev/scanner
At present, the following scanners are known to work with
this backend.
Vendor Product id
------ -----------
NEC PC-IN500/4C
FILES
/usr/freeware/etc/sane.d/nec.conf
The backend configuration file.
/usr/freeware/lib32/sane/libsane-nec.a
The static library implementing this backend.
/usr/freeware/lib32/sane/libsane-nec.so
The shared library implementing this backend (pre-
sent on systems that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_NEC
If the library was compiled with debug support
enabled, this environment variable controls the
debug level for this backend. E.g., a value of 128
requests all debug output to be printed. Smaller
levels reduce verbosity.
SEE ALSOsane(7), sane-scsi(5)AUTHORS
Kazuya Fukuda
sane-backends 1.0.12 17 Feb 2000 sane-nec(5)