sys_attrs_vlan(5)sys_attrs_vlan(5)NAMEsys_attrs_vlan - vlan subsystem attributes
DESCRIPTION
This reference page lists and describes attributes for the virtual LAN
(vlan) kernel subsystem.
Refer to the sys_attrs(5) reference page for an introduction to the
topic of kernel subsystem attributes.
A value that enables (1) or disables (0) the logging of VLAN
debugging messages in the /var/adm/syslog/kern.log file.
Do not modify the default setting for this attribute unless
instructed to do so by support personnel or patch kit documenta‐
tion.
Default value: 0 (disabled)
A read-only attribute that is incremented when an IEEE 802.1q
frame (tagged frame) whose CFI bit is set is received on a VLAN-
enabled interface; the packet is dropped. The initial value is
0.
A read-only attribute that is incremented when an IEEE 802.1q
frame that contains an invalid VLAN ID is received on a VLAN-
enabled interface; the packet is dropped. The initial value is
0.
A read-only attribute that is incremented when a frame is
received on a VLAN-enabled interface for a VLAN that is not con‐
figured; the packet is dropped. For example, if an untagged
frame is received on an interface that is configured into at
least one VLAN, but is not configured to accept untagged frames,
the counter is incremented. The initial value is 0.
SEE ALSOsys_attrs(5)vlanconfig(8)vlan(7)
Network Administration: Connections
sys_attrs_vlan(5)