virt-ls(1) Virtualization Support virt-ls(1)NAMEvirt-ls - List files in a virtual machine
SYNOPSISvirt-ls [--options] -d domname directory [directory ...]
virt-ls [--options] -a disk.img [-a disk.img ...] directory [directory ...]
Old style:
virt-ls [--options] domname directory
virt-ls [--options] disk.img [disk.img ...] directory
DESCRIPTION
"virt-ls" lists filenames, file sizes, checksums, extended attributes
and more from a virtual machine or disk image.
Multiple directory names can be given, in which case the output from
each is concatenated.
To list directories from a libvirt guest use the -d option to specify
the name of the guest. For a disk image, use the -a option.
"virt-ls" can do many simple file listings. For more complicated cases
you may need to use guestfish(1), or write a program directly to the
guestfs(3) API.
EXAMPLES
Get a list of all files and directories in a virtual machine:
virt-ls-R -d guest /
List all setuid or setgid programs in a Linux virtual machine:
virt-ls-lR -d guest / | grep '^- [42]'
List all public-writable directories in a Linux virtual machine:
virt-ls-lR -d guest / | grep '^d ...7'
List all Unix domain sockets in a Linux virtual machine:
virt-ls-lR -d guest / | grep '^s'
List all regular files with filenames ending in '.png':
virt-ls-lR -d guest / | grep -i '^-.*\.png$'
To display files larger than 10MB in home directories:
virt-ls-lR -d guest /home | awk '$3 > 10*1024*1024'
Find everything modified in the last 7 days:
virt-ls-lR -d guest --time-days / | awk '$6 <= 7'
Find regular files modified in the last 24 hours:
virt-ls-lR -d guest --time-days / | grep '^-' | awk '$6 < 1'
DIFFERENCES IN SNAPSHOTS AND BACKING FILES
Find the differences between files in a guest and an earlier snapshot
of the same guest.
virt-ls-lR -a snapshot.img / --uids --time-t > old
virt-ls-lR -a current.img / --uids --time-t > new
diff -u old new | less
The commands above won't find files where the content has changed but
the metadata (eg. file size and modification date) is the same. To do
that, you need to add the --checksum parameter to both "virt-ls"
commands. --checksum can be quite slow since it has to read and
compute a checksum of every regular file in the virtual machine.
OUTPUT MODES
"virt-ls" has four output modes, controlled by different combinations
of the -l and -R options.
SIMPLE LISTING
A simple listing is like the ordinary ls(1) command:
$ virt-ls-d guest /
bin
boot
[etc.]
LONG LISTING
With the -l (--long) option, the output is like the "ls -l" command
(more specifically, like the "guestfs_ll" function).
$ virt-ls-l -d guest /
total 204
dr-xr-xr-x. 2 root root 4096 2009-08-25 19:06 bin
dr-xr-xr-x. 5 root root 3072 2009-08-25 19:06 boot
[etc.]
Note that while this is useful for displaying a directory, do not try
parsing this output in another program. Use "RECURSIVE LONG LISTING"
instead.
RECURSIVE LISTING
With the -R (--recursive) option, "virt-ls" lists the names of files
and directories recursively:
$ virt-ls-R -d guest /tmp
foo
foo/bar
[etc.]
To generate this output, "virt-ls" runs the "guestfs_find0" function
and converts "\0" characters to "\n".
RECURSIVE LONG LISTING
Using -lR options together changes the output to display directories
recursively, with file stats, and optionally other features such as
checksums and extended attributes.
Most of the interesting features of "virt-ls" are only available when
using -lR mode.
The fields are normally space-separated. Filenames are not quoted, so
you cannot use the output in another program (because filenames can
contain spaces and other unsafe characters). If the guest was
untrusted and someone knew you were using "virt-ls" to analyze the
guest, they could play tricks on you by creating filenames with
embedded newline characters. To safely parse the output in another
program, use the --csv (Comma-Separated Values) option.
Note that this output format is completely unrelated to the "ls -lR"
command.
$ virt-ls-lR -d guest /bin
d 0555 4096 /bin
- 0755 123 /bin/alsaunmute
- 0755 28328 /bin/arch
l 0777 4 /bin/awk -> gawk
- 0755 27216 /bin/basename
- 0755 943360 /bin/bash
[etc.]
These basic fields are always shown:
type
The file type, one of: "-" (regular file), "d" (directory), "c"
(character device), "b" (block device), "p" (named pipe), "l"
(symbolic link), "s" (socket) or "u" (unknown).
permissions
The Unix permissions, displayed as a 4 digit octal number.
size
The size of the file. This is shown in bytes unless -h or
--human-readable option is given, in which case this is shown as a
human-readable number.
path
The full path of the file or directory.
link
For symbolic links only, the link target.
In -lR mode, additional command line options enable the display of more
fields.
With the --uids flag, these additional fields are displayed before the
path:
uid
gid The UID and GID of the owner of the file (displayed numerically).
Note these only make sense in the context of a Unix-like guest.
With the --times flag, these additional fields are displayed:
atime
The time of last access.
mtime
The time of last modification.
ctime
The time of last status change.
The time fields are displayed as string dates and times, unless one of
the --time-t, --time-relative or --time-days flags is given.
With the --extra-stats flag, these additional fields are displayed:
device
The device containing the file (displayed as major:minor). This
may not match devices as known to the guest.
inode
The inode number.
nlink
The number of hard links.
rdev
For block and char special files, the device (displayed as
major:minor).
blocks
The number of 512 byte blocks allocated to the file.
With the --checksum flag, the checksum of the file contents is shown
(only for regular files). Computing file checksums can take a
considerable amount of time.
OPTIONS--help
Display brief help.
-a file
--add file
Add file which should be a disk image from a virtual machine. If
the virtual machine has multiple block devices, you must supply all
of them with separate -a options.
The format of the disk image is auto-detected. To override this
and force a particular format use the --format=.. option.
-a URI
--add URI
Add a remote disk. See "ADDING REMOTE STORAGE" in guestfish(1).
--checksum
--checksum=crc|md5|sha1|sha224|sha256|sha384|sha512
Display checksum over file contents for regular files. With no
argument, this defaults to using md5. Using an argument, you can
select the checksum type to use.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
-c URI
--connect URI
If using libvirt, connect to the given URI. If omitted, then we
connect to the default libvirt hypervisor.
If you specify guest block devices directly (-a), then libvirt is
not used at all.
--csv
Write out the results in CSV format (comma-separated values). This
format can be imported easily into databases and spreadsheets, but
read "NOTE ABOUT CSV FORMAT" below.
-d guest
--domain guest
Add all the disks from the named libvirt guest. Domain UUIDs can
be used instead of names.
--echo-keys
When prompting for keys and passphrases, virt-ls normally turns
echoing off so you cannot see what you are typing. If you are not
worried about Tempest attacks and there is no one else in the room
you can specify this flag to see what you are typing.
--extra-stats
Display extra stats.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
--format=raw|qcow2|..
--format
The default for the -a option is to auto-detect the format of the
disk image. Using this forces the disk format for -a options which
follow on the command line. Using --format with no argument
switches back to auto-detection for subsequent -a options.
For example:
virt-ls --format=raw -a disk.img /dir
forces raw format (no auto-detection) for "disk.img".
virt-ls --format=raw -a disk.img --format -a another.img /dir
forces raw format (no auto-detection) for "disk.img" and reverts to
auto-detection for "another.img".
If you have untrusted raw-format guest disk images, you should use
this option to specify the disk format. This avoids a possible
security problem with malicious guests (CVE-2010-3851).
-h
--human-readable
Display file sizes in human-readable format.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
--keys-from-stdin
Read key or passphrase parameters from stdin. The default is to
try to read passphrases from the user by opening "/dev/tty".
-l
--long
-R
--recursive
Select the mode. With neither of these options, "virt-ls" produces
a simple, flat list of the files in the named directory. See
"SIMPLE LISTING".
"virt-ls -l" produces a "long listing", which shows more detail.
See "LONG LISTING".
"virt-ls -R" produces a recursive list of files starting at the
named directory. See "RECURSIVE LISTING".
"virt-ls -lR" produces a recursive long listing which can be more
easily parsed. See "RECURSIVE LONG LISTING".
--times
Display time fields.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
--time-days
Display time fields as days before now (negative if in the future).
Note that 0 in output means "up to 1 day before now", or that the
age of the file is between 0 and 86399 seconds.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
--time-relative
Display time fields as seconds before now (negative if in the
future).
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
--time-t
Display time fields as seconds since the Unix epoch.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
--uids
Display UID and GID fields.
This option only has effect in -lR output mode. See "RECURSIVE
LONG LISTING" above.
-v
--verbose
Enable verbose messages for debugging.
-V
--version
Display version number and exit.
-x Enable tracing of libguestfs API calls.
OLD-STYLE COMMAND LINE ARGUMENTS
Previous versions of virt-ls allowed you to write either:
virt-ls disk.img [disk.img ...] /dir
or
virt-ls guestname /dir
whereas in this version you should use -a or -d respectively to avoid
the confusing case where a disk image might have the same name as a
guest.
For compatibility the old style is still supported.
NOTE ABOUT CSV FORMAT
Comma-separated values (CSV) is a deceptive format. It seems like it
should be easy to parse, but it is definitely not easy to parse.
Myth: Just split fields at commas. Reality: This does not work
reliably. This example has two columns:
"foo,bar",baz
Myth: Read the file one line at a time. Reality: This does not work
reliably. This example has one row:
"foo
bar",baz
For shell scripts, use "csvtool" (http://merjis.com/developers/csv also
packaged in major Linux distributions).
For other languages, use a CSV processing library (eg. "Text::CSV" for
Perl or Python's built-in csv library).
Most spreadsheets and databases can import CSV directly.
SHELL QUOTING
Libvirt guest names can contain arbitrary characters, some of which
have meaning to the shell such as "#" and space. You may need to quote
or escape these characters on the command line. See the shell manual
page sh(1) for details.
EXIT STATUS
This program returns 0 if successful, or non-zero if there was an
error.
SEE ALSOguestfs(3), guestfish(1), virt-cat(1), virt-copy-out(1),
virt-tar-out(1), http://libguestfs.org/.
AUTHOR
Richard W.M. Jones http://people.redhat.com/~rjones/
COPYRIGHT
Copyright (C) 2009-2013 Red Hat Inc.
LICENSE
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
BUGS
To get a list of bugs against libguestfs, use this link:
https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools
To report a new bug against libguestfs, use this link:
https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools
When reporting a bug, please supply:
· The version of libguestfs.
· Where you got libguestfs (eg. which Linux distro, compiled from
source, etc)
· Describe the bug accurately and give a way to reproduce it.
· Run libguestfs-test-tool(1) and paste the complete, unedited output
into the bug report.
libguestfs-1.22.6 2013-08-24 virt-ls(1)